Questions
Showing results 21 to 40 of 60
0

votes

1

answer

1.9k

views

Hi!!

Is there a printable list of the factory supplied Code 100 preset (Amp Firmware 1.44, DSP 1.1, BT 3.1, Gateway 1.5.5)?

Thanks in advance for your help.

George Betts

asked 27 Nov 2020 at 08:34 PM

George Betts
0

votes

0

answers

561

views

Yes, I've read the many questions of the same nature on the forum, and performed all the suggested actions. None of them have been successful.  I've seen many questions similar to mine, and only a few who have been able to make it work... and of those who did, their solutions didn't work for me.

When I connect my amp to my phone's bluetooth, it will pair for audio with no problems.  I can play audio through the amp.  When I open Gateway, there is no "red button" prompting me to connect.  When I tap on the CODE tab in the menu, it says "Not connected" and when I tap on the green "Scan for apps" button, nothing happens.

It will connect to my Samsung tablet with no issues.

Here are the steps I have tried:
Factory reset on the amp.
Unpair  and forget the amp in my phone's bluetooth settings.

Uninstall the app from my phone after clearing the cache and the data.

Update the firmware on the amp (the browser window said I was up to date but I installed the latest firmware anyway.)

What else can I do?  I don't want to return the amp because it sounds great, but not having the amp controls on my phone is a deal breaker.

 

 

asked 26 Sep 2020 at 06:59 AM

Jeremy Stroop
1

vote

4

answers

955

views

I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library.  I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times.  Nothing seems to work.  I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing.  Does my amp need to be serviced for Bluetooth connectivity?

asked 03 Aug 2020 at 12:12 PM

Kent Knudsen (1)
0

votes

1

answer

1.3k

views

 

Hi,

 

I have found a weird thing that may or may not be known with iOS + Bluetooth and the Code 50.

The CODE 50 when playing backing tracks / using it as a Bluetooth speaker is very quiet (So the master is wacked up and the playing guitar is extremely loud). 

 

and the weirdest thing (which physically makes sense but still it shouldn't do it) is that the Amp is predominatly a Left speaker when playing music through bluetooth as my phone (iPhone 6S) thinks my amp is bluetooth headphones rather than speaker (as the headphone icon pops up on the top right). 

 

My amp is on the latest firmware update.

 

Is there any fix for this? There's nothing in the gateway app for audio balencing

 

asked 26 Jul 2020 at 09:49 PM

Ed Thwaites
0

votes

1

answer

745

views

I can't get the phone app and code 100 amp to connect. bluetooth does connect but the app will not show or allow to connect thus make the app unsuable. i have redownload app manty time. reconnected phone many times. amp is up to date firmware. i have had the app working fine and connected in the past.but now no matter how many redownloads, resets and starting fresh i can longer connect with the app to control it. i have been through every setting and all combinations on connecting updatig reseting and nothing seems to work. need help please. thank you.

asked 11 May 2020 at 03:31 PM

shawn isaac
2

votes

2

answers

1.1k

views

I have the Code 25, and just installed the latest updates (1.44) to the firmware. However, I still cannont get the Gateway app to recognize the amp. I am connected via blue tooth as I can play music from my Android phone over the amp, but the controls from the app don't work at all. Again, when I search it does not find an amp. Help? 

asked 20 Feb 2020 at 05:08 PM

Tim Rogers (2)
4

votes

8

answers

2k

views

Hi I have a CODE 100H head/cab and a CODE 100 combo both with the latest firmware re-installed from Marshall and both have this issue, i.e. the amp very oftenn completely freezes when I save a preset.

Steps to reproduce:

- Modify any patch on the front panel

- Save

- 50% of the times the amp seems to freeze. The preset is saved but you can no longer change preset and there is no sound coming out.

The same happens if you modify a patch from the iOS app via bluetooth and then save it from there.

 

It's REALLY frustrating and I can't believe I didn't find anything on this forum under the "crash on save" keywords. Seeing it happens on both of my CODE units it much be a software bug, I don't think it has anything to do with my units.

Anyone else has seen this problem?

 

Thanks!

asked 23 Dec 2019 at 11:45 PM

Lele X (14)
0

votes

2

answers

2.5k

views

I have a code 50 and am trying to update firmware. I have an iPhone X with the Chrome app installed (newest version). I am logged into my Marshall and the gateway app. The gateway app shows I am connected via Bluetooth, but on the my Marshall firmware download page it says I am not connected and my browser doesn’t support download. 

It’s very frustrating, Marshall or any support appreciated.

asked 19 Sep 2019 at 04:03 AM

Mar Fede-mac
0

votes

2

answers

1.1k

views

Just bought my Code 50 tried to connect the Gateway App to either my iPhone 7 or iPad Air 2.

Did a firmware update to 1.44 , the amp is paired in Bluetooth but when in Gateway, it just says it is connecting but never does.

I have tried reinstalling the firmware, forgetting the edvice and re-pairing, removing all other BT devices etc. etc. but still it will not connect.

UPDATE: this was an iOS issue, not the amp. The latest update to iOS beta 13.1 resolved it. 

 

edited 07 Sep 2019 at 06:17 AM

Steven Clarke

asked 31 Aug 2019 at 04:56 PM

Steven Clarke
0

votes

1

answer

1.5k

views

The iOS Gateway app was unable to connect to my CODE 50 even though my MacBook Pro is connected via bluetooth, so I did a factory reset and then tried to do a firmware update. The first part of the firmware update (1.44) appeared to install correctly. Next I saw a DSP update and tried to apply that update. In the middle of the DSP update, I received an error message to the effect that the update failed and I should power off & on my computer/device. I powered my Mac off & on, but the CODE 50 shows a progress indicator (about 20%) and says "DO NOT SWITCH OFF."

I tried to reinstall the firmware/DSP update, but this time the update process would not even begin. I suspect the  problem is the frozen progress indicator and whatever ongoing or frozen process is causing the "DO NOT SWITCH OFF" message.

Othe than ignoring the warning on the CODE 50 and powering it off & on, I don't see what else I can do. Is there a way to abort the ongoing or frozen process without turning the CODE off.

What should I do?

edited 28 Aug 2019 at 03:47 AM

Jim Marshall (12)

asked 28 Aug 2019 at 02:06 AM

Jim Marshall (12)
0

votes

0

answers

1.4k

views

Hi, 

I have had my code 25 for about 6 months and for a while now, everytime I connect my phone and edit in the gateway app the preset freezes and I cannot change anything or change the preset. On the phone it says I am changing but there is no actual changes happening. On the little orange screen on the actual amp it stays on that preset even if I twist the knob to change preset but can still play and change volume.

TodayI was getting sick of it and looked up if there are updates for the amp and there are, which I then went and installed the latest firmware update. But now when I turn on the amp it shows that it's on and shows the preset but stays frozen and will not play sound at all. Is the amp done or can it be fixed?

asked 13 Aug 2019 at 08:03 AM

Krishan Talati
0

votes

2

answers

813

views

Hi There, 

I just notices this now. Im using a code 25. I have updated the firmware of the amp to 1.44. I also have updated the gateway 1.5.5. May phone connecting to the amp. But the gateway app is not connecting to the amp. Im using a galaxy note 9. 

 

Any help please. 

 

Thanks

 Jericho

 

asked 12 Jul 2019 at 01:20 AM

jericho zabala
0

votes

3

answers

1.1k

views

I just bought a CODE 100 combo. Bluetooth audio is pairing just fine but the app never finds or connects to my CODE!

I tried everything, i even uninstalled the app rebooted the phone and started from scratch following your guide but still no luck.
Galaxy s9+ up to date CODE firmware 1.44 and gateway app 1.5.5

Fix this please

edited 12 Jul 2019 at 08:03 AM

Cris Lebrun

asked 11 Jul 2019 at 10:18 PM

Cris Lebrun
0

votes

1

answer

934

views

I just bought a Marshall Code100C from the Sweetwater sale.

Anyways I have 2 older Amdroid phone and NONE can get the Code Gateway App.

But my Newest LG Android phone can download the Marshall Gateway App and install it.

Problem is when I turn on the Code 100C and Turn on The Gateway App on my Android phone

it does NOT find the Marshall 100C and I downloaded the Newest Firmware for the Marshall 100C.

What can be my problem?.Thanks allllll....JT

asked 26 Jun 2019 at 01:36 AM

john sach
0

votes

1

answer

2k

views

I just got this head recently and installed the latest firmware update the other night (6/20/2019).   When I try to connect my IPad through the My Marshall app it seems to be a hit or miss proposition but more miss than hit.   In my settings on the IPad it shows me as connected, and the blue light on the head goes from flashing to solid.  On the app, it shows the head detected but when I press on that I get a "Connection Rejected"  (You may only control amps you are already connected to for audio output) and there's no control over the head from the app.   Now several other times it syncs right up.  I'm at a loss though.  Am I doing something wrong maybe in the sequence (operator error) or is there an issue somewhere else.  The manual doesn't really reference Bluetooth that well.  I'm not bluetooth savy becuase I rarely use it except for my phone in the car and connection there is automatic after I initially set it up.

So is it me?  Is it the gateway software?  Is it the head??   Help please?

asked 22 Jun 2019 at 05:32 PM

Kim Lubstorf
1

vote

0

answers

952

views

It took more than a year, but still!

Finally the annoying Bluetooth problem is fixed!

The amp turns on Bluetooth after power on,  reconnects to the smartphone automatically without manual pairing and the application works fine (there's some problem with application scaling on LG G7 due to screen resolution, but I can live with that).

Thank you for this update, Marshall!

Even if the process was soooo slow that the 1-year warranty ended, it's good to know that you didn't abandon this product :)

Honestly I thought that we won't get any updates and I was surprised to see the Gateway application update and checked the forum just in case. 

Best Regards,

Ilya

asked 21 Jun 2019 at 06:55 PM

ilya macle0d (6)
0

votes

3

answers

1.2k

views

Hello everyone,,

Well,  I've read through all the questions and answers I can.  My Android used to pair fine with my CODE 50.  Now, it will not connect.  I've reinstalled firmware, reinstalled the Gateway app, deleted  nd re-paired the amp.  Very frustrating.  It  seems there are lots of issues with this.  I can hear the amp pair with the phone via bluetooth, but it will not connect with the Gateway.  "Connecting..." appears and doesn't go away.  I'm bummed.  This was a fun amp, but if the bluetooth doesn't work...  anyone got a fix?  Thanks..xvideos xnxx xxx

edited 29 Jun 2019 at 06:38 PM

Lincon gomes

asked 11 Jun 2019 at 07:20 AM

Lincon gomes
0

votes

1

answer

1.2k

views

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

asked 21 Mar 2019 at 04:15 PM

Brett Ewaschuk
1

vote

0

answers

1.1k

views

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

 

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

asked 01 Jan 2019 at 07:22 PM

James Graham (12)
0

votes

1

answer

1.3k

views

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

edited 17 Dec 2018 at 06:02 PM

Saloni kamalsagar

asked 16 Dec 2018 at 11:46 AM

Saloni kamalsagar
Showing results 21 to 40 of 60
Loading - please wait...