Hello! 

I have a Marshall CODE50 combo, and when i connect it to my iPad via cable, the input and the output works well in applications developed by Apple (like Garage Band), but I can't control of my amplifier settings in Marshall Gateway app. Is there any way to control the combo on the iPad through the cable?

Thank you in advance for your reply.

There used to be a choice on the my.marshall.com presets page called "Mygateway".  I want to view  my Code 50 presets from my amp on my computer's screen.  I no longer see this choice. (Don't want to use the phone app)

Thanks,

RF

Hi ! 

i was wondering, is it possible to use MIDI via a bluetooth connection ?

In fact i'd like to use a simple DAW application on my Android tablet to make some music using my Marshall Code. My Code amp connect to my tablet and the Gateway app runs nice, no problem. In the DAW app (which is for now BandLab), i see an option about a "Connected MIDI Devices" and my Code doesnt appear there. So i asked myself if the MIDI interface was really available with Bluetooth ? Or is there something special to configure or install ?

thanks in advance !

Z

A hardware issue prevents connecting my CODE25 practice amp with Gateway via Bluetooth on my PC (Nox / Windows 10). Gateway freezes at 'Turning on Bluetooth' message (the Bluetooth hardware in my PC is faulty). Can Gateway be set to connect via USB instead as a device-level default? My CODE25 amp does connect to Gateway via Bluetooth on my Android smartphone; but the phone's screen is too small to use comfortably, so USB connection to PC is needed for its much larger (I have 26" to 46" PC displays available) displays. Being severely nearsighted and over 50 years old, my options are limited.

i wasn thinking about buying a marshall code 100 but im not sure if its useable with the marshall code amp app. 

I got my Marshall Monitor II headphones yesterday after work and oh my god these are some amazing headphones, however, the Marshall App doesn't actually seem to find, recognise or connect to them. I did a bit of research and even emailed support and unfortunately didn't reach a conclusion (although fast response! Amazing service). This seems to be a major issue since early this year and I would love to be able to use the app. Unfortunately it seems everyone will be stuck without use of the app until an update comes to fix it.

For reference: my phone is running on Android 13, headphones are connecting perfectly. The only issue I'm having is the app itself

Hello!

I just noticed that the Marshall Gateway app is no longer available in my AppStore (Sweden). Is this correct? 

/M

Does the Marshall Gateway app work with an Amazon Fire Tablet?

Can't find the app download in the Playstore for that tablet

Thanx in advance

Keith

Please people, could you help us to developing a new firmware update to fix the DSP AMP simulations for Code 25/ Code 50?

If you could make a fast research on web, you are going to see that this is a very common issue for all Code users. Probably the last firmware updates is affecting just a part of the DSP boards, not all, but in my case and many other people, we can not use the AMP simulations anymore, and the Distortion and Overdrive FX are not ok too.

At least,  could you make the older firmware versions available for tests? I'm sure that most part of the users prefer to have the original and very nice tones than bluetooth running better, better connection with the App, or any other improvement.

Thank you, and please, consider our beg.

Hi, I had a marshall code, dsl 1w, 15w and 40w. I liked of 1w, much loud! I sold all and I have been used a app amplitube with iphone and ipad + irig nano amp, but I figure out in the worst way about update versions, It just stops working after the update. A nice day, and you cant play anymore on analogic gear. 

Now Id like a all in gear and the better for me now its the Code 25.  Even without the app I can handle the amp manually. Although, be convenient. 

Whats the current version suportted for code today? My IPAD 9th  is 16.5, IPHONE 7 is 13.  Is it works? 

thanks. 

After selecting a Preset, and after playing a song when I go back to the Gateway app I see a message saying, "Amp Disconnected, Connection with your CODE amp has been lost. Please check your amp and try to connect again." When I select "OK" it reconnects then I can select a preset. This seems like a new"bug" since the Gateway app has been updated to the current version. My iPhone is on a stand close to my CODE 50 the entire time. (about 1 or 2 feet at most).

Please advise. Thanks!

iPhone 13 Pro, iOS 16.4.1

Firmware: 01 Sep 2022 - v1.47

CODE 50

Bonjour,

Comment faire pour supprimer un preset de l'appli Marshall Gateway( code25).

Merci

Hi, does code 25 works with Tonebridge app on Android, connected by irig 2?

Hello,

I am struggling to connect my newly bought acton 3 speakers to play as stereo, I bought them because I should be able to connect them together, but I am afraid I will need to return them. I tried everything from the Marshall bluetooth app, but it seems that it has some update, so tips from acton 2 don't work anymore. The app doesn't even show stereo mode anymore. Is there any manual which could help me? My last option here, before I will be force to return the speakers. Thanks a lot for any tips!

In case Marshall decides to do another round of Codes, or for people that want to buy one, here is my bottom line after dealing with this thing for a few years. I had Line 6 experience and wanted a simpler all-in-one modeling combo with a bluetooth app that could do hard rock. The Katana looked like a toy so I bought this.

PROS: Solid construction. Looks great. Good range of amps and effects. Bluetooth app is very good and can tune every parameter. Tones can be downloaded and backed up to/from Marshall site. Amp can sound very good (after a lot of tweaking). The Plexi, American OD, JTM Crunch and Acoustic amps are good. The Guv’nor, Compressor, Chorus, noise gate and all the delays and reverbs are useable. Marshall has done sufficient software updates to correct early issues (bluetooth, tones, bugs). Can be used at bedroom volume with Master on ‘1’. Optional footswitch gives good control. Documentation is good. Updater software on PC works well.

CONS: Other than those mentioned above, all the other amps and effects are bad. This includes the JCM800, JVM and Silver Jubilee. All the cabs are bad. None of the stock patches are usable. You have to make your own. There are user uploaded patches you can try but very few are usable. Learning curve is significant. The amp is too loud. When you turn up from bedroom level to louder, the sounds change and become very boomy which should not happen with a modeling amp. No effects loop. The ‘out’ is a mini USB. Connecting to a computer requires a mini USB to USB or Lightning cable, which is not included. I tried to use the USB to record to Garageband and sound came out but I couldn’t make it sound good. The footswitch also has a learning curve, and like other people I had to have mine replaced. 

ADVICE: Don’t buy it. I bought my Code 50 new from Sweetwater for $299 and now the same version of the amp is $399. If you must have a Code, get the 25 instead. It is cheaper and still absurdly loud. The higher volume available in the 50 is useless because it sounds bad. The extra hundred bucks just gets you painfully loud solid state power amp watts. 

If you do get a Code, upgrade all the firmware immediately. You need to connect to a computer to do this, but first you have to find the cable on Amazon. This is unforgivable.

BOTTOM LINE: I have spent too many hours tweaking the Code. This is what I hated about Line 6. But the Line 6 tones were superior. I never got a good JCM 800 sound out of the Code, after hundreds of hours of work. It’s only “great” amp sim, oddly, is the American OD. Marshall’s own Classic Metal patch uses this, not a “Marshall” sim! The Code is marketed as Marshall technology with amp sims created by Marshall, but it is not. Softube created the software and tones. This is not a Marshall amp. Line 6 Marshall sims are far better.

I have now bought a tube amp. I am keeping the Code because I have mastered it and can practice on it but I would not buy it again, certainly not for $399.

new purchase. I have a custom Eddie Van Halen replica orginal. Excact copy of the famous Frankie. 

I have spent time on the app and making adjustments however I dont get the sound i was hope for. Perhaps I need to add an FX ex Boss ME-50. To get the sound i am looking for.  ACDC / Kiss / VH. all i get is a little louder version of my guitar. I have watched many videos on line and they change the setting and get classic rock sounds. Like a Gibson or whatever. Classic rocks sounds.  I have tried many VH and ACDC pre programmed set ups and still not he tone i am looking for. What am i missing?

Thanks 

Hi,

I know that this is a recurrent demand, but please, no more "control the volume using Gateway app" answers, everybody knows that this is a component issue, not a software need for update or anything. The fact is that master volume pots are either low quality ones, or defective manufacturing components. So, all I need to know are the specs of this component (resistance values, taper, etc.) so I can purchase the correct component and replace it myself. Also, understand that I live in a place where there is no authorized Marshall servicing, and my Code amp is over three years old, therefore without any warranty. Again, please no more "send equipment to an engineer" answers, I have enough ability to do the work myself. A good thing would be if you make available the schematic diagrams of the Code amps, but I think that might be not possible. or you would have done it a long time ago.

Thank you in advance for your attention! Marshall Code RULES! But without that scratchy pot...

Best Regards,

I turned all of the presets off, all i want is a plain Plexi or hot rod amp. I have my own reverb and my own delay and EQ. So I took Marshall Fury Lead which sounds pretty good and turned all the other stuff off...

then when i get app. on my phone turned on it goes and overwrites the preset on the Code 100 head. ??? wtf? Now its noisey and feeding back an out of control.

I cannot risk having an amp that squeals and changes presets like that without me asking it. There are too many settings too much to go wrong. 

I am starting to regret buying this thing.

How do i fix it so that the preset stays in the cloud on the amp and everywhere else forever!.. Until i change it...Can anyone please help with that?

its a 100 watt Code. I just want it to be a dirty power amp, no cab simulator nothing...

thanks, NIck

How to add / change thumbnail pic for a preset ?