Hi,
I'm having some problems with my Marshall MG15MSZW Zakk Wylde Mini Stack and would like to know where I can find the wiring schematic so that I can go through it to locate the problematic electronic component(s)?
I have not found any local service centers that possess this information so they're no help and can't fix it.
Any help would be greatly appreciated.
Thank you,
Mark
My Emberton II worked great for a couple of months. I really liked this little thing and was already planning on a larger model for home use. But since a couple of weeks I cannot shut down the Emberton anymore. When I press the center button, it shuts down as it always did, but shortly after it just turns on again and connects to my phone again. And it keeps on doing this until the battery is completely dead.
I have already tried disconnecting all attached devices, doing a factory reset, but the problem just remains. Can something be done about this or is it just faulty?
Hi,
I tried to update my Code 50 firmware. Everything was ok till 100% but finally failed to complete the update.
I did every process advised to fix but I’m stuck.
I can’t reset the firmware even if I reboot.
The only message I have on the screen is on the one hand “no USB connection” or “ready to update”.
What can I do to get my amp working again?
Thanks
Best Regards,
Jérôme
My Action 2 froze in the middle of a firmware update. Nothing works now...resetting doesn't help. Marshall won't help without a receipt, but i got the speaker as a gift. What else can be done?
Good time! Make tones like in digital guitar processors such as NUX, HOTONE, VALETON...
Hi guys, i tried to update firmware with chrome on my Apple computer. Your support told me to use PC. I dont have a PC!
So i went to factory reset my amp and no luck. Only message i see is "chk usb" and no reset is possible.
I need help as i dont care anymore about firmware updates just want to play on my Amp.
Thanks
I have 3 registrations with the same top. If I remove one all disapear. I've emailed Marshalal about 2 months ago and received absolutely no reply. Anyone here having any ideas how to get it down to just one registration of my 1987x?
How in the world are you supposed to get this working? there used to be a utility you could download but its gone.. I have tried 3 different computers and 3 different cables.. same problem, doesnt detect Code 50 connected. Come out.. updating firmware should be simple. Please provide link to firmware update utility or better help than REBOOT computer and amp.. nothing works.
Hi all, I recently unearthed a 100w wedge monitor. It's huge, really heavy, and really old !
I've never encountered one before, so wondering if it's the real deal ? The serial number plate states, Made in England, with a number of 'A 01870'.
Much obliged !
Gary
How do I access the noise gate for a Code 50 amp? I'm trying to use a wah wah pedal with the amp and getting a tremendous amount of noise thru the amp. Thank you
Hi
Would I be able to run 2xJVM 215C amps in stereo in 5 cable method ? I'm a little confused about the 2 x master volumes, I imagine that if I use one for my master volume (Master 1) I would adjust that to the same level on both amps and if I use the second master volume for solo level (Master 2) I would need to adjust that as well on the second (slave amp) as well as the master amp (the one with the preamp I'm using).
To access the solo boost on both amps I would send a midi PC command to both amps which would enable the Master 2 on each amp which would then be at the same level?
Would that be right please ?
Thanks
Paul
was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?
also if the 2 way cant can the bigger footswitch?
Wondering how to turn off whatever it is in the amp that is receiving an AM radio station.
TIA
Jack
Hi,
I have a JCM 800 100 Watt Lead Series, Serial Number is S/A 17873R.
S/A was not use for 50 Watt ?
Thanks
Emanuele
How do I get code 50 to work with Pro Tools? I hooked up the usb cable to my computer, but nothing happens, nothing opens. Do I use a different Asio driver than the one I use with my MOTU interface? If so will they be compatable with-in the same session? The whole reason I bought the Code 50 is because it advertised as being able to connect as a Interface for recording! So far it's been a nightmare!
Rodney K.
Has anyone uploaded any Geordie Walker / Killing Joke tones ?
How do I remove presets from MG15FX
How do I delete a single preset from my library that I don't want
Asked by xavi Fernández Gaya - 08 Mar 2024 at 09:08 AM.....
1. Does this problem occur for all presets? Yes
2. "My potentiometers are almost at "10" - what ptentiometers do you mean? I mean the The volume control buttons for the master volume and volume
3. Do you use any of PRE FX effects like compressor or distortion? If so - what are volume settings of these effects?Yes, I do use pre-fx like compressor or distortions, but they come in programmed presets. How does the volume of these pre-fx settings influence it?
4. What happens when you connect you guitar with your cable to your bandmate's amp?It sounds much louder and more powerful than mine. Is the amplifier a Fender 40W tube amp
When you connect 16 ohms cabinet to 8 ohms 100W amplifier total power is reduced to 50W, but still it should be more than enough. I've got CODE 25 and it's loud as hell.
Is your Code 25 amplifier a combo or is it attached to a cabinet?"
The Celestions in my cabinet are the G12-412ACF 12". There are 4 of them. Do you know how many decibels and power each Celestion cone provides? Another question would be, could it be that the Code 100H amp needs a higher power cabinet (for example, 200w)? Do you know if the Code 100H series requires special cabinets to deliver all the power and force of its 100 watts?
I know these amplifiers are very powerful and good, and Marshall never disappoints me, but now I'm worried because I see that in my rehearsals I can hardly hear anything from my amplifier. I think there's something not right in this whole issue. I would like, since I trust you, some solution or something with preamp, pre-fx, or volumes that I'm not handling correctly in the presets
Where could I buy cabinet CODE412?... I need some information about it. Price, technical data,.... Maybe that's the problem because my amp sounds too lower with a classic cabinet as :
Hi!
Is it possible to record silent - without sound from the speaker - with a DSL-1 COMBO (DSL-1cr) using the emulated out?
Regards
Freddie