Questions
Showing results 381 to 400 of 3881
0

votes

1

answer

377

views

Hi dear readers

 

1st off , i find this forum completely not comprehensive and informative, it feels like quite the opposite,

for my issues, i have a Woburn I, just out of warranty,

 

ever sindce a few months it turns off while playing music

i use the aux standard, play songs, then wham, after 2-5 minutes it shuts off, and restarts and puts the volume back at 50%

this turn off cycle is times about around 4, to 5 minutes, consistently overal (some days it doesn't )  and it keeps doing it EVERY 5 MINUTES FOR DAYS , ugh :(

this is effectively turned my audiophile soundsetup to a paperweight as i dont go to my speaker to change the volume every 5 minutes

and actually it makes me upset, and anti climactic thoards the reason i was useing it in the 1st place.

 

i really would like to solve the problem and have a ON OR OFF SWITCH on my device, so i can actually appriciate it for years, with the purchase price of 400 euros plus at launch, i find this absolutely a right.

after my 1st searches on the web i found a lot more people with this issue, and it feels to me as if its being obscured, and not solvable

 

any fixes found so far anyone?

asked 16 Nov 2022 at 10:39 AM

Jason Jut
0

votes

0

answers

360

views

Is there a document what the DSL40 responds to via a midi footswitch? Any information is appreciated.

Lloyd Plueschow

asked 08 Nov 2022 at 07:04 PM

Lloyd Plueschow
0

votes

0

answers

356

views

WHAT FOOTSWITCH replaces the PEDL-10029 for an AS50D AMP?  AS THIS DOES NOT APPEAR TO BE AVAILABLE NOW 

asked 05 Nov 2022 at 06:29 PM

NORMAN LOUGHTON
0

votes

1

answer

367

views

I have a dsl40cr. I want to run a 16 ohm 1x12 extension cabnet and use the speaker in the combo as well. What speaker output jack do I plug the extension cabnet into?

Thank you.

Rodney Jones

asked 02 Nov 2022 at 02:51 PM

Rodney Jones
1

vote

1

answer

467

views

Gateway version 1.5.5 (Wireless Bluetooth selection from the set list, playback selection)
I bought CODE 25 because of its services.
This wasn't made for a concert, but it was great for practice. It took a lot of work to set up the sounds and I was able to play music to my liking with the help of my mobile phone. Now, against my will, version 2 is here, which does not know these things. It was difficult to download the 1.5.5 version again because I like it, but the next day I have the 2nd version on my phone again and this has happened several times. What right do they have to overwrite my phone's settings?
How could I use my favorite amp and settings again to my heart's content, because that's what I paid for, I worked for. If there is a new version, anyone who likes it can use it, but why prevent those who like the old version from continuing to use the system that was created with a lot of effort. This is why I can't return the amplifier! I am waiting for an urgent reply!

George

asked 01 Nov 2022 at 07:38 PM

Kovács György (1)
0

votes

1

answer

353

views

Hey!

I've been having problem with my Marshall Code 50s edit knob, which has been randomly setting random values. Yesterday I tore down the combo and took a look at the faulty encoder. I couldn't find it anywhere, so if anyone know what encoder is that it would help a lot. I will appreciate any help.

asked 01 Nov 2022 at 10:04 AM

Jakub Michalenko
0

votes

2

answers

549

views

Hi Marshall, 

Since your latest firmware update to v1.47 on 1st September and your update to the Gateway app my sounds for my settings have changed.

For example the 00 setting for JTM Chill that should be using the Marshall JTM45 2245, clean setting is now distorted and despite trying to modify it I can no longer get back the lovely clean sound it had as want to be able to use cleans, crunches and distorions for the various modeling offerings so have now lost one of the three types of pre-amps.

Can I roll back to the previous firmware v1.46 which did not have this issue or is it your Gateway update that is causing this change?

Kind regards

Mick Lawson

 

 

 

 

asked 31 Oct 2022 at 09:52 AM

Michael Lawson (2)
0

votes

1

answer

396

views

Hi

I have ahd DSL40 which I really love - I have been using the little push button on the front panel to swap between the dirty and the clean channels. Today this has stopped working. 

It is stuck on 'green' (clean) - when I push the button it goes over to 'red' but as soon as I let go it goes back to green.

The footpedal works fine for changing channels.

Am i correct in thinking this means the little switch has failed??? 

 

Thanks

asked 30 Oct 2022 at 07:56 PM

Edward Eldon
0

votes

0

answers

345

views

My Code is constantly disconnecting from the Gateway app, any ideas ?????

 

asked 27 Oct 2022 at 08:17 PM

alan garside
0

votes

0

answers

386

views

Really frustrating, this is.  I'll be playing with the gain turned up to about 8 and I can watch as the dials in the app start to move on their own, as if a ghost is messing with it.  I can't find anyone asking this question.  Does anyone know how to get this ghost in the gateway app go away for good?

asked 27 Oct 2022 at 12:28 AM

Brian Simms
0

votes

1

answer

404

views

Hello
since the recent update of the application, I can't find the reader for the backing tracks, which is very practical. and I can't find how to organize and classify the user presets in order.
thanks in advance

asked 26 Oct 2022 at 07:35 PM

Stéphane Bartolomeo
0

votes

1

answer

408

views

Hi together,

in Oct. 2020 (2 years ago), I bought an new DSL 40 CR. After 10 months (I used the amp only at home) the amp was suddenly quiet. My dealer sent the amp to Marshall and it takes more than 2 months to get the repaired amp back.  Now in July 2022 the amp was once again quiet and this time it takes more than 3 months(!) to get the amp back.

After 2 repairs inside the warranty period I have no more trust in Marshall and I want to know, what was wrong with this amp. How can I get informations about the repair? My dealer got no information from Marshall.

Can anybody help me? Is there an warranty repair center?

Thanks in advance!

asked 26 Oct 2022 at 10:06 AM

Roland Kost
1

vote

0

answers

428

views

When I follow the instruction for a factory Reset on my Code 50,

==Hold the AMP button while powering on. Once the screen for the reset process shows on the screen, firmly hold the STORE button to confirm factory reset until the screen shows “CONFIRMED”
===

The Presets then are NOT the factory presets, but what I had put in the AMP preset list, with my modifications.
Not visible change has taken place to the list...

What can cause this?

 

 

asked 24 Oct 2022 at 12:15 PM

Bram Flippo (1)
0

votes

1

answer

401

views

I cannot like any of the presets neither on MyMarshall site nor Gateway2 app. There is no "Sign of the Horns" button.  After  launch of the Gateway2 app it's missing. People like my presets so I assume this is not a general problem. 

asked 21 Oct 2022 at 08:34 PM

Kemal Can Sevimli
0

votes

1

answer

466

views

Hi, I recently purchased a new SC20H - serial number starts with M-2022.

Fantastic amp except I seem to have the same noisy / popping fx loop problem that (now that I have done some research) seems to be quite common.

I have tried all the cable switching / buffered / non buffered / true bypass pedal combinations, different wattage, plugged in, not plugged in etc. regardless of combination - when you press the loop switch it pops and raises the noise floor so it sounds as if you have engaged a noisy overdrive.

Is this simply a design flaw or a faulty unit? I read that it was a problem when it was released but the newer ones were supposed to address this?

Cheers, 

Dylan

 

 

asked 19 Oct 2022 at 06:55 PM

Dylan Smith
0

votes

2

answers

403

views

I am not able to download the Marshall Gateway app.  Any suggestions?

edited 19 Oct 2022 at 01:31 PM

Kenneth Finnson

asked 19 Oct 2022 at 01:31 PM

Kenneth Finnson
0

votes

0

answers

386

views

Hi.

I have a marshall code25 amp.

Can I have a part number of the potentiometer for master volume control?

 

 

asked 19 Oct 2022 at 04:06 AM

sorento studio
0

votes

0

answers

428

views

Probably too much to hope for, but does anyone know what the new "CODE 1" box is that has appeared at the bottom of each preset?

Maybe we are going to get a "CODE 2" soon?

Just kidding, I can't see Marshall doing this again.

 

asked 18 Oct 2022 at 10:32 AM

Joliet Jake (126)
2

votes

0

answers

505

views

will the tuner ever be back?

asked 18 Oct 2022 at 04:36 AM

david fontana (2)
0

votes

1

answer

523

views

The app looks great, but less functional.

- When double clicking to edit any parameter, aap closes by itself instantly.
- When saving a preset in my library, the preset saves with several parameters reset.
- On the website the "My Marshall" tab which contained all 100 presets, no longer appears. Now I can no longer edit and reposition them as I would like.
- In the app, I no longer have the playback option.
- In the app, I no longer have the tuner option.

I hope they resolve this urgently, or at least revert back to the old version.

asked 17 Oct 2022 at 10:37 AM

Maicon Luis Azzolini
Showing results 381 to 400 of 3881
Loading - please wait...