My Marshall Code 100h's blutooth daughterboard has broken causing the amp to be unusable. Marshal advised after looking at it that they do not stock any replacements. Does anyone know where I might find a replacement board as the amp is now discontinued and cannot source a second-hand one anywhere?
Hello,
I own a 50w vintage modern 2266 head and 425A cabinet and I am not sure how to connect the two, meaning not sure which ohm setting I should be using as well as understanding the difference between using the mono and stereo switch.
I tried reading the manual but could not find my answer.
Can someone assist? Thank you!
Hi Marshall,
I have a Code 100 Combo amp which is now out of warranty as was purchased in 2020.
The guitar jack socket and usb connector socket appear to have sunk a bit so am struggling to connect my guitar or to my pc.
What could have caused that as have not used any excessive force when plugging my guuitar lead in and the USB cable has been plugged in for ages as is in my practice room?
Can I attempt to fix it, if so how do I open the back, does it use an allen key as doesn't look like phillips screws?
Where in the back should I be carefull to avoid to not get a shock (even though the unit is fully unplugged from the mains?
Bonsoir la team!
Je suis à la recherche d'une radio cd
qui pourrait envoyer le son sur ma Marshall Stanmore II .
Avez-vous une marque compatible svpđ ?
J'ai fait des recherches, mais je ne trouve rien đ...
Merci pour vos réponses đ!
Bonne soirée !
Hello, I'm looking to see what year this amp was manufactured ? The serial # is S/A O8553K . I found it in a garage sale, and I can't figure it out when searching around. I believe it's 1977 or 1978. Thank you.
Is there a Led Zeppelin preset for the Code 50 amp? If so, what is the number, or the settings? Thanks
I have an Acton II and a Stanmore II Bluetooth speaker that I would like to couple together. I found this support article with a chart of which speaker should be able to couple, and these two are listed. ?
I can pair each of them to my iPhone, and also add them of them into the Marshall app, but after I choose one and select the option to couple the other speaker is not listed.
I found another question where the user was having problems with this process, and also tried following the suggestions there. However, each time I try both speakers never appear in the box to couple. I'm beginning to think I have misunderstood that chart in the support article. Does anyone know if I can couple these 2 speakers, and if so, how?
Are the power (mains) transformer in the Studio JTM head and the Studio Vintage head the identical model transformer?
my code 50 cuts out while playing. this started happing last year when i got it. I did all the software updates and i can only play 5 minutes. I went on line research and dont see anything for this problem, do you think the amp is a defect, im not sure what to do next.
Hi all, wondering if anyone please is able to provide a photo of the circuit board for their Code 50 (even perhaps 25 or 100)?
Mine has died, and I don't believe a schematic is available. A friend of a friend has very kindly offered to look at it for me, and has discovered that a transistor and resistor have burnt out. The transistor he is able to replace, but as the resistor is destroyed, he has no idea what value it is.
I'm hopeful that if I can get a photo of the board showing the resistor inthe R10 position, he will be able to identify and replace it. i loved some of the sounds my Code 50 created, and would be very happy if it was working again !
Many thanks for any help that can be provided.
Best wishes from Australia,
Brian
I just bought a brand new Marshall code 50 amp for my guitar, but when I connect the cable to the input of the amp I have to push it in to work, one end of the cable needs a push so the amp connects to the guitar, but somehow the other end of the cable connects only if I hold it pushed in the amp, if I let go it disconnects. I use a Boston cable and I don't have that problem on my other amp (marshall mg15gfx). I did the last filmware updates and reset my amp 1 time. Since 1 end of the cable works, is it a big deal or can I just continue to use only the part of the cable that works? What should I do?
Is it possible to convert the parallel FX loop I have on the TSL 602 to serial. The parallel loop is rather unusable to me. For time based effects (chorus, delay) the parallel loop gives me too much unusable phased feedback, sounds like a helicopter. I am skilled with a soldering iron just need procedure on how to perform the mod. Thanks,
Morgan
Hi ! The on/off neon switch on my new 2525c silver jubilee studio combo stays on in the off position it's very strange ? Everything else is working as it should ! Any ideas ? Thankyou.
Wondering if the DI out of the silver jubilee is an emulated out, or is it a clean, dry signal? What about the send? I am wanting to record a unaltered signal from the jubilee and wondering which one is best to use for this.
Thanks!
Getting issue in andriod phone in while pairing via marshall blutooth app. But in ios it is working fine.
Hi
I've just bought two used 6100LE Gold amp heads and the certificates are lost or missing.
Is it possible to get duplicates of these certificates?
Thanks
Jean-Marc
Hello everyone,
I was wondering....
How can I get the date of manufacture for an AVT 150 from the serial # on the amp?
Is there a separate serial # on the speaker attached to the amp (and another date of manufacture?)
Are there any free websites to look up either or both numbers?
If there are, can you please post a link or links?
Thank you.
I recently purchased a lightly used origin 20 combo. A very impressive amp! Until i plugged in an external cab. I used jack #2 for a single 8 ohm cab and it worked fine. However, the combo speaker will not come on. I tried jack #3 with the same result. After some internet research i discovered that this is a common issue and can be easily fixed.
Can anyone tell me what the issue is and how to fix it? This is a wonderful amp and i would lole to take full advantage of its options.
So I have a brand new DSL100HR-U head and MX412a cab. when on the clean channel the proverbial wind noise comes threw. all mu other amp cab setups are working fine with the MX412a and it is not the cab. Everything from power conditioner to the cables are new as well. the only thing i havent done is swwitching out valves. Any thoughts or advice? Also to mention I'm a blind musician. and firstish timer amp troubleshooter
