What are the Preamp tube positions from left to right (looking from the rear of the amp) and what do they control? Thank you

 The 2555x user manual says that the d.i output is frequency compensated and meant to be used to feed a mixing desk or a slave amp but I find this confusing because the frequency compensation is usefull only in the first case and probably really bad if you feed a slave amp and cab.

can you elaborate please? 

When will the Marshall Code 50 be release in the UK?

Hi.  A friend of mine goes to London next month.  Can you tell me where can he buy for me a power stage pcb replacemente for my tsl122? Thanks!!

Hi , please advise what rectifier is used in Silver Jubilee Mini 2525H  - solid state or tube? Thanks!

I've downloaded the firmware updater onto my Windows 7 (most recent updates loaded) PC and it seems that there is no eligant way to close the updater after use. I had to use ProcMgr to force the updater to shutdown.

I also found that unless you do things in the correct way - fire up the updater tool before plugging in the USB, it seemed to get very confused - again I had to use procmgr to close it down.

I recently bought a Marshall 2x12" Cab with Marshall Goldback speakers mounted, type SPK100, 8 ohms, 80W each. As Marshall does not make speakers I am curious who the manufacturer is. The speaker's cage does not look like a Celestion. It seems to be an Eminence at first glance.

Does anybody have any information? Thank you!

I am running a Lexicon MX200 thru the serial loop on my JVM 205C.  Sounds great but when I turn off the loop using the front panel selector button via footswitch or manually its still on and making whatever effect I have chosen.  What have I not done correctly? 

Bob

I am wanting to purchase the Marshall DSL 40c amp.

Would I be able to use my MG4x12 extention cabinet with it?

I'm looking for a Marshall Cabinet for my newly aquired 3203 - It origianlly paired with a 4x10 but am wondering how it will sound with a 2X12 and also - will just any footswitch do? I think the answer on that last one is yes but I am not sure.

Hi, to change the power valves of my JVM 410, do I need a matched quartet or I can use two matched pairs? The bias is set by two separate trimmers, one for every pair, so maybe two matched pairs will be enough?

Thanks!

I wrote in a question you can please excuse me as now that I have the amp in hand, I am very happy. This is excellent.

I would consider how to add a high frequency speaker so music streaming is a bit brighter, but I notice the sound via USB is pretty good and one up on the Mustang series which did not stream music out the USB port. Thank You. I kept my G-Dec 3 Thirty around for that reason (plus tweeter and line outs - I might add). As I get used to this I might find the headphone out sufficient but wish you had added Lineout so the speaker stayed engaged but could take the lineout to other amps or recordering devices.

Can you tell us which interal speaker is used, ohm rating and the frequency response?

I do not want to open it up to figure it out since I plan on maintaing my warranty, at least for the next year.. :)

Thanks,

James

PS who signed off on this design, give them a raise :). But if you had a version with the features I mentioned, I would gladly have paid the additional cost and only been fully satisfied. Like I am at 96.75% now. You can quote me.

Is there an update for the factory firmware yet?

Thanks

Mark

I purchased a G50R CD from a friend. Is there a manual or any downloadable info on this amp? I would like to know more about the CD input on the back and how it's used. I really don't know much about it so any info is helpful.

Thanks....

Is my bluesbreaker a series ll model? The serial number is 1999-48-0866-AG

Hello, I purchased the DSL40C and MX212 Cabinet. I know the Speaker in the combo is 16-ohms. I also know the speakers in the MX212 are wired for 8-ohms. I know if I use the cabinet, I can't use the speaker in the combo together. My question is, has anybody ever put an 8-ohm speaker in the combo? I am thinking that two 8-ohm loads would give me a 3x12 config for extra beef! Would this work, and would the amp still sound just as good if I used it alone (to take to jam sessions) on the 8-ohm output? Thanks   

whereis the serial number located on my MG100HCFX amp?

Is there a printable Code owner's manual?

Could you give me a rough age of My JTM45 Lead - Serial appears to be S5002

Cheers

Mike

Hello, I know this has been covered here and I have read all of the messages, but I would like some newer feedback regarding my newly purchased DSL40C implimented with a Line 6 POD 2.0.

I realize you can't shut off amp modeling and that to achieve the least amount of colorization, and preserve my Marshall tone as much as possible, I should set the POD 2.0 to Tube Preamp, and EQs to 12 o-clock, which shuts off Cabinet Simulation.   I want to use the POD 2.0 because it has a bunch of presets I use, which I will modify and it gives me multi effects with a Pedal. 

How should I route this, given the effects send on the DSL40C is probably line level, and has no attenuator. The POD 2.0 has instrument in and I presume Instrument out. I know it will run -10 and +4 when using TRS. I will say I don't see any documentation on the DSL40C loop. 

This is my first Marshall setup and need advice from you gurus.

Any and all advice is appreciated.

Thanks so much!