Hi. I bought a Acton III and discovered that the right MEDIA CONTROL does not work: when I press on it nothing happens.. I have already updated the firmware and done a factory reset. But the problem still exists. Is there a way to fix this?

When I plug in footswitch nothing happens no light anything tried another cable nothing both cable work with guitar so I'm thinking not cable 

At first I couldn't load any community presets in the gateway app, so i reinstalled and now I can't login. the websites SSL encryption seems to be gone and im worried that marshall won't notice for a good while, anyone know when this'll be fixed?

I've recently bought the DSL1-CR and i want to praticse with headphones, but if plug them to the emulated output the sound comes out from the speaker, i decided to check on the instructions where there is written that in case of i have the DSL1-HR i must umplug the speaker from the amp, but there are no information about the CR. 

Can you help me?

Regards,

Lorenzo.

I am struggling to connect my two acton 3 speakers to play as stereo, I bought them because I should be able to connect them together, but I am afraid I will need to return them. I tried everything from the Marshall bluetooth app, Is there any solutions?

I receive the following error when trying to set up my Acton II Voice with the Google Assistant built-in speakers using google home on my iOS device: "the operation couldn't be completed. (kgskerrordomain error - 83902.) 

I have done all the basic trouble shooting such as performing a factory reset on the device, rebooting my phone + internet, changing the language on my device, but nothing seems to work.

Any suggestions on how to fix this issue during the set up?

I have a dsl40, although I don't know if it is a 40 or 40c by serial number it is a 2013?  I bought this used a couple weeks ago.  It did not come with foot switch.  

I have purchased three of them and they don't work on my amp?  It looks like Marshall has a different pedal for each year.  I have seen pedal numbers (pedl?) 

but those pedals did not have that number on it.  How do you tell.  Sorry for so many questions.  Can pedals on the fx loop and the front input work at the same time? Any help would be greatly appreaciated.

Thanks!

Hi everyboy,  even though I am registered in MYMARSHALL, I cannot vote on any preset from any other user. When I am not authenticated the vote icon appears on the website, but when I log in the icon disappears. Why? 

I recently bought a marshall major 4 from an unauthorised store and wanted to check if it is legitimate, the serial number of the headphone is 73400553L23495B0089194.

the headphones feel great and sound awesome aswell but i still am suspicious about it being legitimate.

thank you in advance.

Hi, 

I'm having some problems with my Marshall MG15MSZW Zakk Wylde Mini Stack and would like to know where I can find the wiring schematic so that I can go through it to locate the problematic electronic component(s)? 

I have not found any local service centers that possess this information so they're no help and can't fix it.  

Any help would be greatly appreciated. 

Thank you, 

Mark

My Emberton II worked great for a couple of months. I really liked this little thing and was already planning on a larger model for home use. But since a couple of weeks I cannot shut down the Emberton anymore. When I press the center button, it shuts down as it always did, but shortly after it just turns on again and connects to my phone again. And it keeps on doing this until the battery is completely dead.

I have already tried disconnecting all attached devices, doing a factory reset, but the problem just remains. Can something be done about this or is it just faulty?

Hi,

I tried to update my Code 50 firmware. Everything was ok till 100% but finally failed to complete the update.
I did every process advised to fix but I’m stuck.
I can’t reset the firmware even if I reboot.
The only message I have on the screen is on the one hand “no USB connection” or “ready to update”.

What can I do to get my amp working again?
Thanks

Best Regards,
Jérôme

My Action 2 froze in the middle of a firmware update.  Nothing works now...resetting doesn't help.  Marshall won't help without a receipt, but i got the speaker as a gift.  What else can be done?

Good time! Make tones like in digital guitar processors such as NUX, HOTONE, VALETON...

I have 3 registrations with the same top. If I remove one all disapear. I've emailed Marshalal about 2 months ago and received absolutely no reply. Anyone here having any ideas how to get it down to just one registration of my 1987x?

Hi all, I recently unearthed a 100w wedge monitor. It's huge, really heavy, and really old !

I've never encountered one before, so wondering if it's the real deal ? The serial number plate states, Made in England, with a number of 'A 01870'.

Much obliged ! 

Gary

How do I access the noise gate for a Code 50 amp? I'm trying to use a wah wah pedal with the amp and getting a tremendous amount of noise thru the amp. Thank you

Hi

Would I be able to run 2xJVM 215C amps in stereo in 5 cable method ? I'm a little confused about the 2 x master volumes, I imagine that if I use one for my master volume (Master 1) I would adjust that to the same level on both amps and if I use the second master volume for solo level (Master 2) I would need to adjust that as well on the second (slave amp) as well as the master amp (the one with the preamp I'm using).

To access the solo boost on both amps I would send a midi PC command to both amps which would enable the Master 2 on each amp which would then be at the same level?

Would that be right please ?

Thanks

Paul

was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?

also if the 2 way cant can the bigger footswitch?

Wondering how to turn off whatever it is in the amp that is receiving an AM radio station.

TIA

Jack