Are the effects pedals mutually exclusive? It seems like you can't have distortion and compressor (for example), at the same time. Is this right?
Hi Marshall team,
I got my Marshall Monitor II headphones yesterday, but the Marshall App doesn't seem to find, recognize, or connect to them.
Yes, I can see the message that you know about that issue my question is do you have any terms for when it will be fixed?
Because I tried Equalizer from the app on iOS and it's sorely lacking on Android.
Thank you in advance.
I tried to update software on my Code 25 with Mac. Firmware 1.48 and didn't work. "An error occurred - The update process was not completed. I tried to restart Pc, AMP, nothing. Now I can't use totally the AMP. When I turn on, CHECK USB message on the display. Please help me!!
I tried with Chrome and Opera, nothing change.
I purchased a very nice and great sounding used but newer DSL40CR that came with the compatible 91016 six-button footswitch, but unfortunately it does not work.
The standard footswitch that also came with the amp works fine. And I also checked 3 separate working cables, so it seems to be the footswitch itself. When you plug it in, it sort of uncontrollably cycles through channels and all six blue lights illuminate on the switch, but then nothing. Totally dead.
I really was pumped at being able to set up four pre-sets, clean through lead and a few in between. Now I'm stuck with just the two playing live.
That footswitch seems to be unavailable anywhere. Is anything else that is available compatible?
thanks!
Andrew
Was wondering why the clean channel on my DSL40CR sounds slightly distorted. Not truely clean. Could this be a tube issue? Thanks.
Why does my phone keep asking for a paring pin ever five to ten minutes to connect to my Marshall code 25 and keep disconnecting from my phone i have a Google Pixel 7a
I´ve never palyed with an Amp Stand. I´ve got a CODE 100c and I would like to know if anyone has the esperience and if it is true that it feels diferent.
Hi,
I recently purchased a new Marshall ST20c combo amp. I absolutely love the amp. However, I purchased a Keeley reverb pedal (new) and decided to try it through the FX loop of the amp. I got no sound at all. Then I tried it through the front end of the amp and it works perfectly. Would I need to get this fixed under warranty or is there something I'm not doing correctly. I plugged the send from the amp to the input of the pedal and the return of the amp to the pedal's output. Please advise A.S.A.P.
regards
Stephen Hubbard
I've got a CODE4X12 cab and want it raised from the floor but I'm struggling to find a stand that will keep it level (i.e. parallel to the ground). Anyone have any ideas?
Cheers.
The above amp loses power after 5 to 10 minutes of play and I get reverb even with the control in the off position. This is with the volume and master at half and on clean. In overdrive it does the same though I ocassionally get chorus or a sort of hammered repeat, It has been checked by engineers at Marshall who found no fault in any mode although I have heard from a reliable source that there have been these sort of problems before and the suggestion was to do with the switches. As i had to send this back via the dealer more than 200 miles away and back to marshall, I wouldn`t want to do it again with the same result even though it`s under warrasnty.
My Marshall CODE 50 presets button is not working anymore, anyone can tell me what part I need to buy to fix it ?
I think that this forum should be dedicated, if not to Marshall Code exclusively, then to Marshall products and not to anything else such as advertisements that have nothing to do with music or our concerns and hobbies.
Greetings
My Marshall CODE 50 is getting power and display is on, but not making any sound. I have tried disconnecting and reconnecting guitar cables and used two separate guitars, both same result. Hooked the guitar up to another amp to make sure it was not the guitar and the instrument worked. Issue seems to be with the CODE 50 itself. What steps do I need to take to trouble shoot?
Benjamin Robb
When trying to preform first time firmware update in browser it says "CODE: Not connected", although cable is connected.
Context:
I have a Marshall DSL100 head and a MX212 cabinet. According to the Marshall website, the MX212 is an 8 Ohm cab and it has 2 Celestion Seventy 80 speakers (80W, 16 Ohm each).
Based on this, I supposed that the cabinet should be wired in parallel (16 Ohm / 2 speakers = 8 Ohm cab), like in the following diagram:
Currently, I have the speaker cable plugged from the 1x8 Ohm output to the input of the cab. It works perfectly and I haven't had any problem after almost 2 years of use.
The issue started when I decided to check the inside of the cab. I noticed that the speakers are wired like this:
From what I understand, this may also be another type of parallel wiring (If that exists). I would like to know if this is normal or something is wrong.
Thanks.
Hello, I can't find a preset for playing Immortal band, can you succeed to create such a preset ? Let me know. Thank You !
some time ago the jack imput of my amplifier burned so i was searching for a replacement but i didnt find one so i was wondering how i can get this piece
Is the USB cable supposed to be included with the CODE 25 amp? Mine didn't come with one.
My stockwell 2 could not pair or connect to any bluethooth nor can be found i reset it and tried all manuals info but still without result any help please?
I just bought my new Marshall Monitor II yesterday and the anc function suddenly goes wrong. It sounds like wind flows in right ear. What is wrong with it? Or is it the problem of the exsistence of app?