To all,

I notice latest firmware update v 1.44 july 2019, improves master volume control, it doesnt spike like it used to, can someone confirm this, what other changes are there ?besides bluetooth improvement also

I just bought a CODE 100 combo. Bluetooth audio is pairing just fine but the app never finds or connects to my CODE!

I tried everything, i even uninstalled the app rebooted the phone and started from scratch following your guide but still no luck.
Galaxy s9+ up to date CODE firmware 1.44 and gateway app 1.5.5

Fix this please

Dear Marshall Team,

It took some time, almost a year, but finally we got the long awaited update of the firmware to fix the painful Bluetooth issue on CODEs. I installed it a few days ago (which was a bit of an issue as reported in another of my posts but finally succeeded) and now CODE does what it is supposed to do.  BT comes on and connects as it should every time I turn on the amp and start Gateway on my Ipad/Iphone.

I'm very happy that you could fix the problem and I encourage all brothers and sisters in pain to upgrade the firmware asap if they haven't done already.

In the light of this fix I think we, the community, may also forgive you that for months you told us that it is not a firmware issue ;-) 

So far I also think that the BT connection is more stable than it used to be. 

Now I can enjoy again my little CODE 25. 

Thanks, Alex F.

I just got this head recently and installed the latest firmware update the other night (6/20/2019).   When I try to connect my IPad through the My Marshall app it seems to be a hit or miss proposition but more miss than hit.   In my settings on the IPad it shows me as connected, and the blue light on the head goes from flashing to solid.  On the app, it shows the head detected but when I press on that I get a "Connection Rejected"  (You may only control amps you are already connected to for audio output) and there's no control over the head from the app.   Now several other times it syncs right up.  I'm at a loss though.  Am I doing something wrong maybe in the sequence (operator error) or is there an issue somewhere else.  The manual doesn't really reference Bluetooth that well.  I'm not bluetooth savy becuase I rarely use it except for my phone in the car and connection there is automatic after I initially set it up.

So is it me?  Is it the gateway software?  Is it the head??   Help please?

It took more than a year, but still!

Finally the annoying Bluetooth problem is fixed!

The amp turns on Bluetooth after power on,  reconnects to the smartphone automatically without manual pairing and the application works fine (there's some problem with application scaling on LG G7 due to screen resolution, but I can live with that).

Thank you for this update, Marshall!

Even if the process was soooo slow that the 1-year warranty ended, it's good to know that you didn't abandon this product :)

Honestly I thought that we won't get any updates and I was surprised to see the Gateway application update and checked the forum just in case. 

Best Regards,

Ilya

After the last update my amplifier knocks every 3 sec, when I turn on the bluetoof stops. How to restore the earlier version of the firmware, I will add that the connection bluetoof does not work the amplifier is just not visible to other devices, please help.

Marshall finally released V1.43 of the Code Firmware.    My phone finally connects reliably over Bluetooth which is a plus.   It sounds like 3 different devices can now be paired too.    A little disapointing that no other presets or other functionality was added but at least this major issue was fixed albeit after a UNACCEPTABLE time frame.    I expect more from Marshall.    

Hello everyone,,

Hi Marshall,

The last firmware update broke the bluetooth autoconnection issue and it has been more than a year and a half and you never updated it. Last firmware update was at Oct 2017, so I made a decision, I posted my Marshall Code 25 on Marketplace so I hope I can get rid of it and get an amp that works properly or at least works as advertised.

I hope you fix the bluetooth issue before you loose more customers. I think I will never buy a Marshall product again.

hi support

why do not you solve this problem???

my hardware:

Iphone X, iOS 12.1.4

Ipad Pro, iOS 12.1.4

Marshall Code 25, Firmware 1.4.1, date of purchase 12.03.2019

I bought the combo yesterday and it's full of bluetooth bugs - looking now at the FORUM my impression is that the support doesn't care about it.

- No automatic bluetooth connection - iPHONE - I am having always to force Iphone to "forget" the AMP and pairing it again... each time...

- MAC IOS , When I try to connect the bluetooth in my MAC, it makes the system crashes, mouse and keyboard stop working... there's no were to get the necessary code to bluetooth connection...

DO WE HAVE PLANS FOR A NEW FIRMWARE TO BE RELEASED SOON ? PLEASE

Actually I'm totaly not interested in bluetooth connection, but of course I understand that it might be an essential prolem for some people...

But there are some other problems I'd like you to find good solution for.

1. Master volume. From 0 to 10% there is almost no sound, over 10% it becomes very loud. 

2. Decreasing sound level with Volume pot results in decreasing USB signal level - not acceptable for players using USB output for recording in DAW software. It would be nice if for clean preamp gain at 2 and volume at 3  give recording level about -6 dB, now it is about -36 dB... 

Best regards, Jacek.

P.S. What is a frequency range of CODE 25 speaker?

No automatic bluetooth connection after firmware update.

Please solve this problem.

Or support firmware rollback!

I have already asked twice about Bluetooth connectivity issues.

https://my.marshall.com/forum/question/1647/how-long-do-i-need-to-wait-for-code25-firmware-with-bluetooth-issue-solved?filterType=recent&myActivity=True

and 

https://my.marshall.com/forum/question/1308/there-is-a-problem-with-the-bluetooth-connection-since-the-firmware-update.?filterType=recent&myActivity=True

I've been asking questions for over 10 months already, and it's been a year since you released the firmware.
I am already anticipating your answers.
Do you plan to update the firmware?

This is really ridiculous. If you do not have any more updates, I hope you will be able to roll back to the previous version of firmware.
Previous versions did not have this problem at all.

please find away to do BT firmware update. just hoping.

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1.  I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1.  The connection didn't always work and sometimes dropped out.  I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all.  I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth.  As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth.  I've also tried searching for it with an Ipad but this also couldn't see the Amp ?  It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang.  It's a good amp but seems to have to many glitches at the moment looking at the forums.  I'll give it one more go though if anyone has any suggestions to try.  Any ideas anyone ? Many thanks for reading.

I've had my Code25 for less than a year now. In order to use the bluetooth features I have to establish a brand new connection every time. I have to forget the device on my phone then repair. How can I fix this issue? Yes, my firmware and app are up to date. It is very annoying. I should be able to just turn the amp on and pair to it automatically. Without having to go through so much trouble.

Hello, I have acquired the CODE 25, really an excellent amplifier, very versatile and very good presets. My problem and please I hope you help me to resorve it, is that even though I can connect via Bluetooth, I can listen to my tracks ....... the big problem is that when I want to use the FX or presets it appears that there is no amplifier connected ... (either from my android phone or my Ipad I ... I do not understand what the problem is.) Secondly, when I want to install the MARSHALL FIRMWARE UPDATE UTILITY, to enter presets or update the ampli, does not recognize the connection.I request guidance to be able to make full use of such a beautiful tool for my music.I use Widows 10 and G. Chrome.For your attention, thank you very much