Questions
Showing results 41 to 60 of 67
0

votes

0

answers

931

views

Just got my CODE 100 2x12 and I can't seem to sync up the presets I've chosen on my PC, I'm using my Android device and sometimes they're there, sometimes incomplete, sometimes reverts back to factory. The android app seems faulty. If I hook the amp up to my PC will it always remember the library presets? I don't want to rely on PC or Android to remember my hard work.

asked 04 Aug 2018 at 10:29 PM

Justin Wandell
3

votes

5

answers

1.6k

views

edited 22 Aug 2018 at 02:00 PM

Roger Shepard (4)

asked 18 Jul 2018 at 07:10 PM

Roger Shepard (4)
2

votes

5

answers

8.1k

views

Hi,

I recently purchased a Code 50 and have been trying to connect it to the gateway app on my Android phone. The phone connects to the amp successfully via bluetooth and I can stream the audio out to the amp directly using Spotify but when I go into the gateway app, it says "Not Connected". I tried the "Scan for Amps" button but it doesn't find anything. Any help is appreciated.

asked 02 Jul 2018 at 03:03 AM

Himanshu Chaturvedi (2)
1

vote

3

answers

1.4k

views

So I bought a Marshall CODE 50 a bit ago, and with nearly device I've tried - there seems to be a lot of issues with getting the gateway app to connect to the amplifier in general (most of the time it doesn't work - despite pairing just fine). 

I've tried this on the Samsung Galaxy S8, iPad 5th generation, iPhone 7+ - The connection issues seem to stem from the apps use of Btle on these devices. 

To experiment, I built an application that connects to the amplifier via bluetooth for Windows, and issues commands to the amplifier through the PC. This application uses a "classic" (SPP /RFCOMM) socket connection to send commands. The application works perfectly fine via this means - it can be seen running below: 

As an experiment - is there a way to force the mobile applications (if it isn't using a btclassic / rfcomm connection) to use a btclassic connection as opposed to btle? 

Thanks and all the best, 


Michael Mendelson

Principle Engineer, Pulse Interactive

Lead Software Engineer, Pirahna Bytes RED

edited 13 Apr 2018 at 11:01 PM

michael Mendelson (11)

asked 10 Apr 2018 at 04:53 AM

michael Mendelson (11)
0

votes

1

answer

1.3k

views

Hello. I just bought a code 50, and been trying to connect the Bluetooth but it simply doesn´t work. No Code50 is found in the list.
I have a Sony Xperia L, with the newest Android version (7+), but i can´t download the Marshall Gateway App from the Play Store, cause it says it´s not compatible with my Android version. 

I´ve read the forums, and more people seem to have the same problem. Please FIX so i can try using the full potential of my amp...

asked 09 Apr 2018 at 09:25 AM

Danilo Jose Duarte Neubern
0

votes

1

answer

1.4k

views

Hi, my Code 50 USB has stopped working, nothing wrong with the USB port because it still charges the phone - tried two cables, no luck.  So now I'm trying to figure out how to play songs through it via Bluetooth but *&^%%%%### no luck - how the hell do you do it? I've downloaded the Marshall Gateway app to my android but all i get is my phone icon and an arrow to the amp icon. DO I have to do something on the amp?

asked 07 Apr 2018 at 03:31 AM

Leone Britt
0

votes

4

answers

1.7k

views

I have a Code 100 and my instructor has Code 25 amps.  I neeed a consise explaination of how to copy a preset from a Code 25 to my Code 100.  So far, the tutorials and FAQs have been more confusing than helpful.  I have the Marshall Android app and can connect to the Codes but have not method of copying setup from one to another.

Can anyone steer me in the right direction?

Thanks!

 

asked 09 Mar 2018 at 08:48 PM

Jim Miller
1

vote

2

answers

1.3k

views

hello,

Bluetooth connection is not very good in my opinion.

Bleutooth signal code 25 is ok, samsung s8 detects it alright.

But when i use the gateway android app it doesn't connect altough it shows in app as detected.

Is there a patch upcomming for the amp code series?

Greetings

 

asked 09 Feb 2018 at 05:04 AM

JB Hak (1)
0

votes

1

answer

966

views

I upgrade to Android 7.0

Bluetooth is ok (blue light fixed) but impossible to connect Gateway to my Code.

It worked with old Android version.

   What can I do?

asked 30 Jan 2018 at 09:13 PM

Etienne Grosjean
0

votes

1

answer

1.2k

views

Hi, I want to know if there is any development that will make phones like mine compatible with the Marshall App, it would be a huge disappointment if I cannot get to use the app since my phone is modern and running Android 6. I'm writing this before even having turned on my brand new Code 25. It says your device is not compatible with this version on google play; get this fixed for us people! it's 21 century for Gods sake! thank you.

asked 06 Jan 2018 at 05:17 PM

Roberto Marcelo Ocanto (11)
1

vote

1

answer

1.3k

views

How can I get the Marshall Gateway App to install on my ATT-ZTE Z971 Android version 7.1.1 cell phone ?

Google Play says my phone not supported. There are no warnings of this nature when buying the "CODE 50".

asked 01 Jan 2018 at 05:43 PM

Robert Jones (1)
0

votes

1

answer

1.1k

views

I have paired my Code 25 to my phone, which is running android 7.0, but the Play store won't allow me to download the app, or give me a specific reason my device "is not compatible". Is there something I'm missing?

asked 01 Jan 2018 at 05:24 PM

michael harper
0

votes

1

answer

1.1k

views

Hello using Android Tablett the Code25 wired with USB cable gives Info that IT IS not connected.

Also one question to my Gateway and my Marshall, are this two standalone Systems? how can my library from my Marshall be used in my Gateway. In my opinion all this ist a litte bit to confusing.

Thx.in advance

B.R.

 

asked 22 Dec 2017 at 05:08 PM

slaven lesic
0

votes

2

answers

1.2k

views

my code worked ok with my galaxy 5 but i got a new moto z running android 7.1.1 and it will connect to bluetooth but will not  connect in gateway. when i push scan for amps it never finds the code amp and yes i pushed the bluetooth buttons on the amp.  in the gateway app the in the bottom left corner the amp/phone icon is missing for switching from amp to phone presets. the screen has the blue preset shown but the library has them in yellow.  the worst part is that the display on the code amp is not working. it is barely readable. just yellow with the black barely visable. so without being able to program it using the display it doesn't work with my phone either.  i have owned a lot of marshalls and still have a bunch but i have never been so dissapointed as i am with this piece of crapp. can't use it live because of the dropouts when switching channels and yea i know about using the same amps and settings in all the presets but that is unaceptable. i have the footswitch and thats a disaster too. one little slip like accidently pushing two buttons at the same time or too fast or twice freezes the amp or reprograms it. yea really cool turning it off and back on in the middle of a song.  i tried using it live once and it was a disaster. never again. so i love the tone for recording but now i can't even do that because it wont connect bluetooth and the display is almost dead so i can't program it.

asked 15 Dec 2017 at 06:23 PM

ken nechvatal
0

votes

3

answers

1.8k

views

Hi,

 

I've modified about 50 presets on my code 50 amp. I have recently installed the gateway app on my android phone and works well with teh amp.

I want to backup al my modified preset from my amp to another place, for instance on my marshall  cloud.

When I connect my phone and the gate way amp and I select to save the preset and make sure that save to libary option is selected I can save the preset. When I logged on the my marshall nothing of the modified names is visible on my marshall. Also when I checked the library on the phone nothing has changed.

I only can see my modified presets when I connect to the amp. (Golden modify buttons)

My question: How can I backup all my modified presets to a cloud or locally on my phone in a easy user friendly way ?

 

asked 07 Dec 2017 at 12:57 PM

Arie Sterrenburg
0

votes

1

answer

2k

views

Just got a code 25,  loaded Marshall gateway on my samsung J3 android phone and noticed when you choose a patch from the library the threshold setting shown on early videos  now appears to have morphed into Gate?    Is this an error on the latest update.??  Has anyone else noticed this.

regards Lee

asked 02 Dec 2017 at 10:34 AM

Lee Damms
0

votes

3

answers

862

views

Hi, I'm connecting to the Nokia 6, android 7.1.2, code music play goes, but gateway still does not connect, software code 25 updated, restore network settings did not help.....any help?

asked 20 Nov 2017 at 06:26 PM

Peter Turček
0

votes

4

answers

1.4k

views

Hi Support Team!

I am using a

Samsung Galaxy S7 Edge Device

with Android 7.0 

and Gateway App v 1.4.2

to a Marshall Code25 with the latest Firmware Version (as of 25 Sep 2017). The Firmware Update Utility says v 1.0.0.15 N in the bottom left corner.

I was able to use Gateway to control the Code25 until a while ago, I am not entirely certain if it was until the latest Android Update, but have a strong feeling it was until then.

Now I am able to pair the devices, connect via Bluetooth, Stream Audio over the Code, also able to FIND the Code in the Gateway App, but unfortunately I am not able to connect in the Gateway App. When I tap the Code in the Connect Menu, it says "Connecting..." but then nothing happens. It just will not connect.

I tried all your troubleshooting from the website, including Firmware Update, re-installing Gateway, unpairing, forgetting device, re-pairing etc.

I always end up in the "Connect..." mode and am not able to control the Code via Gateway.

I was very happy with amp and experience and really liked the remote function via mobile and Gateway app, even more now I am very disappointed that this bug persists already a few weeks with no App update or firmware update seeming to fix this. 

Please try to recreate the bug with the described configuration and please find a solution and release a bugfix/new software version.

Many thanks in advance and kind regards

Chris

asked 25 Sep 2017 at 07:45 PM

Christian Koch
0

votes

3

answers

1.6k

views

Well,  I've read through all the questions and answers I can.  My Android used to pair fine with my CODE 50.  Now, it will not connect.  I've reinstalled firmware, reinstalled the Gateway app, deleted and re-paired the amp.  Very frustrating.  It seems there are lots of issues with this.  I can hear the amp pair with the phone via bluetooth, but it will not connect with the Gateway.  "Connecting..." appears and doesn't go away.  I'm bummed.  This was a fun amp, but if the bluetooth doesn't work...  anyone got a fix?  Thanks.  Bill

asked 08 Aug 2017 at 02:30 AM

bill burke
0

votes

4

answers

1.5k

views

I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1.  I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1.  The connection didn't always work and sometimes dropped out.  I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all.  I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth.  As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth.  I've also tried searching for it with an Ipad but this also couldn't see the Amp ?  It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang.  It's a good amp but seems to have to many glitches at the moment looking at the forums.  I'll give it one more go though if anyone has any suggestions to try.  Any ideas anyone ? Many thanks for reading.

 

Thanks for the responses.  I think it is a hardware issue though with the bluetooth just not working on the Amp.  It doesn't seem to matter what device I use the amplifier just isn't visible to anything ?

edited 27 Mar 2017 at 11:36 AM

David Keeley

asked 24 Mar 2017 at 10:40 PM

David Keeley
Showing results 41 to 60 of 67
Loading - please wait...