Bonjour,

Comment faire pour supprimer un preset de l'appli Marshall Gateway( code25).

Merci

Here's an interesting thing. User Tomáš Nekovář, stole my Octafuzz preset and put it up as his own. Even complete with my Youtube link and soundcloud demo.

Seen it all now,

Oh well it was put up to share anyway, so enjoy MY patch everyone.

How can I reinstall all the 100 factory presets (and overwrite all my selfmade presets) ???

I recently purchased a Code 25 and uploaded some presets to it. When I first select the preset it sounds great, but if I go to another one for a little bit and cycle back, the sound is completely different. What could cause this? The only thing I'll change when playing is the master volume. It typically gets very boxy with a lot of bass and lose mid/treble sound. I have to turn it off then on to get it back.

how to add a GRAMS preset?

Hi all,

I have a brand new Code 50 + Footswitch - got them today.  I have saved 3 of my own presets to Bank A 1 2 3.  No problem. Also assigned the tuner to a switch.  That was all fairly straightforward.  

However, I am unable to assign any other (new) presets to any of the other banks. When I follow the exact same process I used for Bank A - The footswitch just defaults to one of the amps, stock presets (all of which sound nasty).

I've watched the tutorials. At the moment, I have only 3 presets of my making on the switch and no, apparent way, of using any of the other banks.

Am I missing something obvious?

Cheers,

Mike

my code 25 is connect to the phone whit bluethoot, but nothing happens , the preset cannot be changed .......who can help me? 

I've recently bought a new computer that only has USB C ports on it, and the CODE50 comes with the USB mini b to USB A cable, and I previously used this to record the amp sounds directly into Ableton and it would work just fine. To overcome this issue of not having the right USB I first used an adapter, but this revealed a new issue, that being a lot of latency and some fizzly sounds, leading me to believe the connectivity through the adapter was faulty. I bought a USB mini b to USB C cable to try to fix this issue, but it persits, and now when I try and connect my amp to my computer for anything, such as to see if there are updates or to try presets from the library, it seems that no connection is recognised at all. I was wondering if there were any drivers to install to help fix this issue, or if it was something else.

I am new to electric and got this amp from a friend. Love the external features, but hate when my phone audio is always blasting when choosing cloud presets. 

In case Marshall decides to do another round of Codes, or for people that want to buy one, here is my bottom line after dealing with this thing for a few years. I had Line 6 experience and wanted a simpler all-in-one modeling combo with a bluetooth app that could do hard rock. The Katana looked like a toy so I bought this.

PROS: Solid construction. Looks great. Good range of amps and effects. Bluetooth app is very good and can tune every parameter. Tones can be downloaded and backed up to/from Marshall site. Amp can sound very good (after a lot of tweaking). The Plexi, American OD, JTM Crunch and Acoustic amps are good. The Guv’nor, Compressor, Chorus, noise gate and all the delays and reverbs are useable. Marshall has done sufficient software updates to correct early issues (bluetooth, tones, bugs). Can be used at bedroom volume with Master on ‘1’. Optional footswitch gives good control. Documentation is good. Updater software on PC works well.

CONS: Other than those mentioned above, all the other amps and effects are bad. This includes the JCM800, JVM and Silver Jubilee. All the cabs are bad. None of the stock patches are usable. You have to make your own. There are user uploaded patches you can try but very few are usable. Learning curve is significant. The amp is too loud. When you turn up from bedroom level to louder, the sounds change and become very boomy which should not happen with a modeling amp. No effects loop. The ‘out’ is a mini USB. Connecting to a computer requires a mini USB to USB or Lightning cable, which is not included. I tried to use the USB to record to Garageband and sound came out but I couldn’t make it sound good. The footswitch also has a learning curve, and like other people I had to have mine replaced. 

ADVICE: Don’t buy it. I bought my Code 50 new from Sweetwater for $299 and now the same version of the amp is $399. If you must have a Code, get the 25 instead. It is cheaper and still absurdly loud. The higher volume available in the 50 is useless because it sounds bad. The extra hundred bucks just gets you painfully loud solid state power amp watts. 

If you do get a Code, upgrade all the firmware immediately. You need to connect to a computer to do this, but first you have to find the cable on Amazon. This is unforgivable.

BOTTOM LINE: I have spent too many hours tweaking the Code. This is what I hated about Line 6. But the Line 6 tones were superior. I never got a good JCM 800 sound out of the Code, after hundreds of hours of work. It’s only “great” amp sim, oddly, is the American OD. Marshall’s own Classic Metal patch uses this, not a “Marshall” sim! The Code is marketed as Marshall technology with amp sims created by Marshall, but it is not. Softube created the software and tones. This is not a Marshall amp. Line 6 Marshall sims are far better.

I have now bought a tube amp. I am keeping the Code because I have mastered it and can practice on it but I would not buy it again, certainly not for $399.

I'm assuming I have 100 slots on my CODE 50 for whatever presets I choose. How do I specify which numbered slot I wish to update or change with any of the presets on MyMarshall.com. Not sure if this question makes sense or if I even worded it correctly. 

ayuda con preset para el solo de audioslave like stone

I turned all of the presets off, all i want is a plain Plexi or hot rod amp. I have my own reverb and my own delay and EQ. So I took Marshall Fury Lead which sounds pretty good and turned all the other stuff off...

then when i get app. on my phone turned on it goes and overwrites the preset on the Code 100 head. ??? wtf? Now its noisey and feeding back an out of control.

I cannot risk having an amp that squeals and changes presets like that without me asking it. There are too many settings too much to go wrong. 

I am starting to regret buying this thing.

How do i fix it so that the preset stays in the cloud on the amp and everywhere else forever!.. Until i change it...Can anyone please help with that?

its a 100 watt Code. I just want it to be a dirty power amp, no cab simulator nothing...

thanks, NIck

Suddenly, Bluetooth stopped working right on my phone (Huawei P series)  while I'm playing...  Amp is updated to latest version and every time i want to change preset surprise! The phone is unpaired, it needs to reconnect again... but guess what? Now the screen on my code start blinking, not red or the buttons either, but it blinks like if loosing power or something... I don't know if it might be an electrical issue or it's just a lose cable inside that needs a check. 

alguien podria ayudarme con un preset que emule el sonido para el Solo de Audioslave Like Stone

Please answer quick!

I don't want to always use my phone when playing. There used to be a way to save presets directly in the amp but I can't seem to do it anymore. These past updates have really screwed up the code amp for me. It doesn't seem like any of the support videos are accurate any longer. 

How to add / change thumbnail pic for a preset ?

When switching between presets, factory made and made by others - in the app the sound goes from low medium to max, up and down.. 

I use my amp on low in our living room, and its bad for my kids.. scary.

Also alot of fizz crackling when turning the master knob.  Common issue? Is there a fix? Sound jumping up and down.

When the sound is super loud i just touch the volume knob and it goes down in volume to where the volume knob actually is