I am not able to transfer presets from Mac to Code 50. The display below preset shows code not available though usb is connected
Is there a capability to control the CODE100H via a BOSS ES-5 or MUSICOM LAB EFX LE loop / switcher? (Via MIDI/USB)???
Hi have a Marshall code 50 what usb cable do I buy to fit to a iPad Pro ?
Hi. I have a question: The Code USB interface is ok only with pc or it work with really usb midi? With usb midi pedal like Midi commander by Meloaudio, for explample, work or not?
if it work only with pc like daw is very very poor choise. next firmware? the orignal PDL 91009 is ok, but it's very very limited.
I have a CODE 100h + CODE412 and I love them !!!!
I use a pedal board with different effects and was thinking of adding a looper / switcher (Boss ES-5 or MUSICOM LAB EFX LE).
I would like to know if with the looper I have listed I can change presets to CODE100H via midi. Do I need a USB / MIDI interface? Thanks
I have seen a couple of questions pertaining to usb connection from Code USB to iphone or ipad for recording in garageband, etc.
The answer given by Marshall reps was the same for both and that something about difference in usb 2 and lightning cable.
My Question is: Will an iphone camera connection kit correct that issue? It has the female end input of USB on it.
I use it to connect my Arturia Keylab Essential to my ios apps and it works fine.
I’d hate to damage my Code 50 though so I came here.
Hoping for a speedy response.
Je n'arrive plus a faire reconnaître mon téléphone dans l'appli gateway Marshall
Le téléphone se connecte via bluetooth mais l'appli ne me donne pas accès au réglage / pas de connection
Je ne plus piloter mon ampli avec le téléphone alors que cela fonctionnait parfaitement auparavant.
J'ai fait une mise a jour de l ampli par USB
Quelqu'un rencontré le même problème ?
Merci pour votre réponse.
Je viens de recevoir le Marshall CODE 25 et j'ai essyé de l'utiliser directement.
Plusieurs critiques :
- Aucun manuel papier
- Pourquoi utuliser un Mini USB Type B (souvent utilisé pour les caméras, les appareils photos ou les manettes de console de jeux) quasi plus utilisé, et surtout pas fourni ?
Pourquoi pas un Micro USB Type B (répendu partout) ou usb normal, voir usb type C dans ce cas là c'est le futur ...
-Les vidéos tuto sur le site ne sont pas assez complètes.
Par exemple le playback ... Je n'y arrive pas.
C'est dommage de devoir remplacer des resets d'usine pour mettre celles que l'on créé, ou alors il y aurait fallut un autre moyen sans passer via PC ou Smartphone... Il y aurait dû avoir quelques pistes prévues, ou un port usb, micro usb pour mettre une carte mémoire.
Pareil pour le pédalier pas de manuel papier, un peu chaud à comprendre au début sans explications.
J'éspère que vous pourrez me renseigner.
Pour n'y a t'il pas une notice, un manuel, papier ( voir un PDF via internet) qui explique tout le fonctionnement les mamip' comment utiliser toutes les commandes de cet ampli, simplement.
Et pourquoi ce port USB ??? et aucun OUTPUT ...
Hi I have a Code 25 which has just giving" Check USB" when switched on when USB is plugged in says "Ready" and I still cant connect did a system reset still the same. Is it dead? or is there somthing else I can try?
Hi Marshall team! I recently got my awesome Marshall Code 50, and it has great tones and great sounds! However, would you recommend recording (for a serious album) with a microphone, say of course Shure SM 57 or will it sound better by plugging in the amp via USB to my computer? Thanks!
Hi! I have an issue while trying to transfer dowloaded presets to my Code25. It occures both usb and bluetooth connections. On a usb connection i click the “amp” icon on a preset, it’s name appears on a Code screen. I push and hold store button on amp, “saved” appears. But then Code becomes freeezed, it does not react on button push etc. when i switch it off and then switch on it works fine, preset available on amp. The same issue appears when i try to transfer presets using Gateway app. What I do wrong?
After installing the latest Firmware update my Marhsall code 100 will not respond. The screen on the amp says USB not connected and I cannot do anything. I have tried a factory reset but that not working either. Help.
My footswitch stopped responding under the following scenario.
Marshall Code 50
Four button footswitch
Macbook pro connected via USB
Sound output set to Marshall Code
Playing Youtube videos through the amp and playing along
After a while, the footswitch stopped responding. I couldn't change banks or position within a bank.
Unplugging the USB cable seemed to get things going but footswitch stopped responding again shortly after.
Turning the amp off an on again resolved the issue.
if i use a clean preset of the marshall code 100H i got issues with crackling sounds. Even after turning it off and on. Its extremly annoying and it destroyes all that i record into my DAW. With this crackling sounds this Device is absolutly useless!! I've also updated to the latest Firmware version but nothing changed!
How can I update firmware when I don't have USB port on my Marshall speaker
I’m looking into getting a new IPad and I was curious if I can use GarageBand as my software and record direct from the USB port on my Marshall code 25 to record? Or should I spend the money for a new Mac book or Mac laptop will either of those work?
Cable plugged in to both computer and Code 50. Display shows 'Ready for Update' - but neither the browser or Desktop Utility will connect.
Rebooted everything and tried from laptop. Same results. What's wrong?
Why can we not update via bluetooth connection rather than USB cable?
I think I might have tossed out my USB cable by accident! I cannot find any place to order a replacement one, not even on Marshall's web site.
Hey Marshall, you ahve my email, why not tell me how much and where to pay so I can get a replacement and update my Amp!!!!
I just got around to updating the firm ware on the code 100 thought as long as i had the amp connected to my pc via the usb cable I would check out the code editor and it would not respond looked at the manual casually and did not notice any mention of how to connect
dos this need to be acomplished using a midi to usb cable