I have received the following error on my iPad after an update of the IOS:

context 3D not available ! Possible reasons : wrong rendermode or missing device support 

I have uninstalled and reinstalled the app, disconnected the Bluetooth and reconnected, everything I can think of and nothing has gotten rid of the error message. Very frustrated. Thoughts?

Greg

Hi I have a CODE 100H head/cab and a CODE 100 combo both with the latest firmware re-installed from Marshall and both have this issue, i.e. the amp very oftenn completely freezes when I save a preset.

Steps to reproduce:

- Modify any patch on the front panel

- Save

- 50% of the times the amp seems to freeze. The preset is saved but you can no longer change preset and there is no sound coming out.

The same happens if you modify a patch from the iOS app via bluetooth and then save it from there.

It's REALLY frustrating and I can't believe I didn't find anything on this forum under the "crash on save" keywords. Seeing it happens on both of my CODE units it much be a software bug, I don't think it has anything to do with my units.

Anyone else has seen this problem?

Thanks!

I have an ipad 6th Generation, and I am having trouble getting the gateway app to run.

I download the app, and when I open it I get the following:

Context 3d not available! possible reasons: wrong renderMode or Missing device support.

i have tried deleting and reinstalling the app, but I just get the same message. Tried on my wifes ipad, exactly the same.

The app runs on my iphone 6s with no problems.

please help!

brian

Hi my problem is the Marshall gateway app not connecting Bluetooth to my amp I've paired successfully to my iPad but it only sometime connects to the amp does not connect automatically very frustrating I've deleted app several time still the same problems do you have a update to help regards Rob 

Can CODE 50 sync user presets  by iPhone app ?

I know the way by mac(chrome).

I have recently had my iphone 8 software updated to ios 13.1.2 and since then have not been able to control my Code 25 amp via Gateway from my phone even though, in iphone settings, I am connected via bluetooth but within the Gateway App I'm not. I have upgraded my Gateway App to version 1.5 back in July and up to now it's worked perfectly well. Is anyone else having this problem and if so  is there an App upgrade?

Here's the solution to pairing an iphone/ipad to CODE as of latest apple update. Stop blaming Marshall and learn to work your Apple device!!! Too many whiners complaining about problems that have everything to do with dumb Appple users!

1. settings>gateway app (find in list of apps)>turn on Bluetooth & other options you prefer

2. settings>bluetooth (make sure bluetooth is on), then pair CODE with device following the regular pairing instructions

3. APOLOGIZE to every person you bitched to and learn to work your amp and phone like a capable musician and not the babboon that you are!

Fired up the Gateway app after upgrading my ipad to iPadOS 13.1.2 and I get a message "Context3d not available! Possible reasons: wrong renderMode or missing device support". Nothing happens after that. I have an ipad 6th generation.

To make the most of my CODE50, this web site, and the iOS Gateway app, it is my understanding that I need to connect the CODE50 via a mini-USB cable, connect to the CODE50 in the bluetooth settings of my iPhone, and also connect to the CODE50 in the Gateway app on my iPhone.

When I take all the above steps, I can do everything I want, but I also hear unwanted system bells and whistles from my MacBook Pro and/or my iPhone. Can I do something to get/retain all the CODE50 functionality without the macOS/iOS system sounds? How exactly?

I have a code 50 and am trying to update firmware. I have an iPhone X with the Chrome app installed (newest version). I am logged into my Marshall and the gateway app. The gateway app shows I am connected via Bluetooth, but on the my Marshall firmware download page it says I am not connected and my browser doesn’t support download. 

It’s very frustrating, Marshall or any support appreciated.

Just bought my Code 50 tried to connect the Gateway App to either my iPhone 7 or iPad Air 2.

Did a firmware update to 1.44 , the amp is paired in Bluetooth but when in Gateway, it just says it is connecting but never does.

I have tried reinstalling the firmware, forgetting the edvice and re-pairing, removing all other BT devices etc. etc. but still it will not connect.

UPDATE: this was an iOS issue, not the amp. The latest update to iOS beta 13.1 resolved it. 

The iOS Gateway app was unable to connect to my CODE 50 even though my MacBook Pro is connected via bluetooth, so I did a factory reset and then tried to do a firmware update. The first part of the firmware update (1.44) appeared to install correctly. Next I saw a DSP update and tried to apply that update. In the middle of the DSP update, I received an error message to the effect that the update failed and I should power off & on my computer/device. I powered my Mac off & on, but the CODE 50 shows a progress indicator (about 20%) and says "DO NOT SWITCH OFF."

I tried to reinstall the firmware/DSP update, but this time the update process would not even begin. I suspect the  problem is the frozen progress indicator and whatever ongoing or frozen process is causing the "DO NOT SWITCH OFF" message.

Othe than ignoring the warning on the CODE 50 and powering it off & on, I don't see what else I can do. Is there a way to abort the ongoing or frozen process without turning the CODE off.

What should I do?

Hello All,

What cable does someone use to hook up their ipad to a Code 50? it would a lightning to a ???

And why does one need a cable to  hook up to the Code? if the Code is synched via blutooth then anyhting on the APP, such as updates or presets, should also be able to get tot he Code via the blutooth and not need a cable. Could this be a glitch on Marshall's end or  they just never programmed it into the software to do it. Seems like an oversight, no? 

Thanks for any help anyone can give,

Lou

I try all suggestions in FAQ Support until "Last resort" But ..... nothing, I can't see the CONNECTED red button.

Running V1.43 firmware.

I have followed all instructions and can not get the iPad 6 to connect in Gateway app.

It, however "pairs" just fine Bluetooth wise on the iPad 6! 

AND Gateway works well on my iPhone 5, switches presets and everything.

So I know I am doing this right and the Marshall code 100 Head is responding via Bluetooth (with my iPhone 5) but NOT with the iPad 6.

Edited: Its the damnedest thing. I removed and reinstalled the app on my iPad 6 at least 8 times with the same results.  

Then I reinstalled and paired the "9th" time, and it worked!!!!

I can turn the 100 Code head amp off, and back on and it still connects.

I'm glad it works now, but I dunno what I did differently.

I just got this head recently and installed the latest firmware update the other night (6/20/2019).   When I try to connect my IPad through the My Marshall app it seems to be a hit or miss proposition but more miss than hit.   In my settings on the IPad it shows me as connected, and the blue light on the head goes from flashing to solid.  On the app, it shows the head detected but when I press on that I get a "Connection Rejected"  (You may only control amps you are already connected to for audio output) and there's no control over the head from the app.   Now several other times it syncs right up.  I'm at a loss though.  Am I doing something wrong maybe in the sequence (operator error) or is there an issue somewhere else.  The manual doesn't really reference Bluetooth that well.  I'm not bluetooth savy becuase I rarely use it except for my phone in the car and connection there is automatic after I initially set it up.

So is it me?  Is it the gateway software?  Is it the head??   Help please?

On my Android device Samsung Galaxy 8+, Software version G955USQU5DSDA.  The Gateway crashes whenever I attempt to import music.

On my iPad Pro  (9.7-inch), Software version 12.3.1,  The Gateway refuses to load music.

Any help, clarification, or a suggestion of a solution, (is there a particular program that works well to assist the import of music into this app on either platform)? 

I also have a PC running WIndows 10 Pro x64, with an i7 and 32GB of RAM, is there any work around involving any particular DAW that allows this?

Hi,

when will  you solve gateway app problems ? we've all been waiting for 3 years and a half !

You can't hide behind "it's on Apple because ios evolved" !!

Of course, it evolves, that's the way things do. And as soon you enter apps world you will have to make Gateway do the same; it's obvious, and i'm pretty sure you're not so naive.

So, please stop relying on your brand, and release a new Gateway version to fix all those bugs.

Or, make Gateway opensource, and we will do it for you.

Stephane

Marshall Gateway last releases :

20 dec 2016

16 june 2016

21 jan 2016

Fender tone last releases :

6 jun 2019

14 mar 2019

12 fev 2019

14 sep 2018

....

Do you want us to switch from Marshall to Fender ? Such a bad experience with Code is leading us to.

I'm a beginner. I've experiemented with all the presets of my CODE50. It's an amazing amp/speaker combo. However, I would like to have a better understanding of what the switch and 4 knobs do on my Epiphone Les Paul, apart from all the amazing things that the CODE50 can do. This would seem to require that I set the CODE50 to work as a "pure amplifier," solely increasing the volume of the guitar output, without adding any effects to modify/model its output. Can I achieve this by doing the following using the iPhone app?

Turn to Pedal 1 preset (and not use a pedal)

Keep Pre-Amp at Natural

Turn Power-Amp and Cabinet off

Turn all FX off

Anything else?

Hey, Marshall! I connect my iPhone 8+ with my 100H without any problems. I’d like to dedicate a cheap tablet to it, in order to have a bigger screen and touch controls, and mount it to my mic stand. Does the Amazon Kindle Fire Tablet work with the gateway app? I know iOS and Android are compatible. What about Fire OS, or whatever it is that Amazon runs? Thanks for answers.