Questions
Showing results 61 to 80 of 85
1

vote

1

answer

1.4k

views

Hi, Is there a way to reduce the power on a Code 25 from 35w down to 5w or 1w like you get on modelling amps from 'other' manufacturers?

To use as a practice amp in my home, I'm having to set the master volume and volume controls really low on the amp and still dial it back on the guitar to the point it is affecting the tone of the preset.

Since this was not obviously available on the top panel, I wondered if it was available via the app but I can't find it if it is.

Thanks in advance.

asked 04 Apr 2018 at 04:51 PM

Gary Casey (1)
0

votes

5

answers

805

views

Hi,

When I connect Phone via bluetooth, I can not see a presets, only "tab to sync" when I tab  it is shows this one and one or two more, but the rest is still tab to sync. Next connecting and all presets list is tab to sync again. Code do not want to synchronized with gateway. Do you have any idea how to change that? 

asked 10 Mar 2018 at 01:45 PM

Sebastian Halikowski (1)
0

votes

4

answers

1.2k

views

I have a Code 100 and my instructor has Code 25 amps.  I neeed a consise explaination of how to copy a preset from a Code 25 to my Code 100.  So far, the tutorials and FAQs have been more confusing than helpful.  I have the Marshall Android app and can connect to the Codes but have not method of copying setup from one to another.

Can anyone steer me in the right direction?

Thanks!

 

asked 09 Mar 2018 at 08:48 PM

Jim Miller
0

votes

1

answer

770

views

How do I get the user presets that others created on to my CODE. The app only shows what is onboard the amp itself. I have saved some on the site but can not get them to the phone nor can i see them on the app at all.

asked 21 Feb 2018 at 12:54 PM

Paul Richards
0

votes

0

answers

591

views

como puedo acceder al gateway del ampli (code 25) para re acomodar los preset a mi gusto

ya que la paguina solo puedo ver el gateway de la nube

 

asked 11 Feb 2018 at 01:54 AM

ronal snz
1

vote

2

answers

1k

views

hello,

Bluetooth connection is not very good in my opinion.

Bleutooth signal code 25 is ok, samsung s8 detects it alright.

But when i use the gateway android app it doesn't connect altough it shows in app as detected.

Is there a patch upcomming for the amp code series?

Greetings

 

asked 09 Feb 2018 at 05:04 AM

JB Hak (1)
0

votes

2

answers

719

views

I've only had my Code 25 for a few weeks now and finally updated the firmware yesterday. Wondering where the promised '13 new presets' were (still only the original 99 on the Code), I started poking around here. Here I've found the 13 new official presets, as well as some other user made ones I'm interested in.  But as stated in the subject, I need some help.

First, I chose the Add to My Library Option.  Here on the desktop , I see 11 tones (wrong number, but not the biggest issue) have been added to My Library. But when I actually look in the Gateway, again, it's the same original 99 tones.  I don't see any of the new ones anywhere. So I'm obviously not able to get these via Gateway right now.

Via the cable, I'm able to sample these new presets. I choose individual presets from the website, load them on the Code (one at a time) and hear what they sound like. But turn the amp off and on and they're gone again. I've tried synching, but that doesn't seem to change anything.

Things seem to be working mostly the way they're supposed to. But I'm clearly missing a finally step or two. I'd like to get at least some of these new (Official/User) presets into my Gateway and onto my Amp. Any help would be sincerely appreciated. Clearly, the simpler the explanation the better.




I'd appreciate any assistance. If appropropriate, feel free to call me 'Dummy', 'Idiot' whathave you.

asked 29 Jan 2018 at 07:26 PM

Brian Fox (1)
0

votes

1

answer

5.5k

views

I just bought the CODE 50 and like it alot; I also have the GATEWAY APP on my phone.

(FYI: I literally must have 25-30 other Top Notch Amps- MARSHALLS / SOLDANO / HUGHES KETNNER / LINE 6 etc;

But I needed something very small for some of the tiny gigs we do; and I feel the CODE has better "Sounds" than my Fender Mustang GT - was using)

MY QUESTION:

-I just created 15-10 CUSTOM PRESETSon the CODE. They are obviously saved on my CODE 50 AMP ....as Presets 1 -25;

-BUT: HOW DO I ALSO SAVE/STORE THEM  TO MY GATEWWAY IPHONE APP???!! (aka; so I don't "lose' them, in case I want to use on another Code Amp, etc.?)

(Basically I'm afraid if I do it wrong; I'll restore the Factory Presets onto my Amp and all my work will be lost!)

-AND; if I do that; will MY PRESESTS  stay in my "APP"; even when the Amp is turned off and not connected to App?

Please let me know and thanks  (and any other Suggestions or INTEL!)!

Dave Saul

ELECTRIC DUDES - NY

asked 07 Jan 2018 at 02:08 PM

Dave Saul
0

votes

1

answer

638

views

Dear staff,

I have code 100H with 412. I have add presets from browser, I updated the firmware without problems but when I change preset positions on that page (My gateway) and hit save, nothing happens. I use Chrome and MIDI connection works fine.
How can I solve this problem?
Thank you.

Francesco

asked 05 Jan 2018 at 08:41 AM

Francesco Romoli
0

votes

2

answers

891

views

my code worked ok with my galaxy 5 but i got a new moto z running android 7.1.1 and it will connect to bluetooth but will not  connect in gateway. when i push scan for amps it never finds the code amp and yes i pushed the bluetooth buttons on the amp.  in the gateway app the in the bottom left corner the amp/phone icon is missing for switching from amp to phone presets. the screen has the blue preset shown but the library has them in yellow.  the worst part is that the display on the code amp is not working. it is barely readable. just yellow with the black barely visable. so without being able to program it using the display it doesn't work with my phone either.  i have owned a lot of marshalls and still have a bunch but i have never been so dissapointed as i am with this piece of crapp. can't use it live because of the dropouts when switching channels and yea i know about using the same amps and settings in all the presets but that is unaceptable. i have the footswitch and thats a disaster too. one little slip like accidently pushing two buttons at the same time or too fast or twice freezes the amp or reprograms it. yea really cool turning it off and back on in the middle of a song.  i tried using it live once and it was a disaster. never again. so i love the tone for recording but now i can't even do that because it wont connect bluetooth and the display is almost dead so i can't program it.

asked 15 Dec 2017 at 06:23 PM

ken nechvatal
0

votes

3

answers

1.3k

views

Hi,

 

I've modified about 50 presets on my code 50 amp. I have recently installed the gateway app on my android phone and works well with teh amp.

I want to backup al my modified preset from my amp to another place, for instance on my marshall  cloud.

When I connect my phone and the gate way amp and I select to save the preset and make sure that save to libary option is selected I can save the preset. When I logged on the my marshall nothing of the modified names is visible on my marshall. Also when I checked the library on the phone nothing has changed.

I only can see my modified presets when I connect to the amp. (Golden modify buttons)

My question: How can I backup all my modified presets to a cloud or locally on my phone in a easy user friendly way ?

 

asked 07 Dec 2017 at 12:57 PM

Arie Sterrenburg
0

votes

1

answer

1.5k

views

Just got a code 25,  loaded Marshall gateway on my samsung J3 android phone and noticed when you choose a patch from the library the threshold setting shown on early videos  now appears to have morphed into Gate?    Is this an error on the latest update.??  Has anyone else noticed this.

regards Lee

asked 02 Dec 2017 at 10:34 AM

Lee Damms
1

vote

1

answer

819

views

Hi, how can I upload the presets from my code 50 amp to my gateway in my.marshall.com and change the order?

asked 27 Nov 2017 at 03:37 AM

Bruno Ortega (1)
0

votes

1

answer

1.9k

views

The presets list is different on my code 100 head compare with the Marshall gateway  (the first 14 presets)  so is the 100 head different compare to Marshall gateway or the other code amps?  and i tryed to reset the amp  but the presents still different compare  to the gateway.

edited 10 Nov 2017 at 07:15 PM

Jan Stolpe

asked 10 Nov 2017 at 12:08 PM

Jan Stolpe
0

votes

1

answer

789

views

Just got the amp a week ago, still playing around with it. Have iphone 7 the app wouldn't stay connected, so am using ipad air app and connection is fine. Hasn't dropped yet and reconnects when amp is turned back on no problem. The problem I do have is when I practice at night and find a setting on a preset I like, but not wanting to 'save' it yet, when I turn on the amp the next morning the app 'restarts' and setting I used the previous night is set back to the first one on the amp "Heaven" or whatever it is. 

Weird thing I can use on and off throughout the day, turn amp on and off, and everything is as I left it, no problem,  both app and amp. The problem seems to happen overnite, the next day the app links up to the amp and it goes back to the first preset, Heaven,  when I want to have it as I left it the night before. Is this an amp setting, an app setting or am I too stupid to figure it out. Logic would be if I turn off and back on during the day and my last setting is there as I left it the same should happen when I turn it on in the morning. Note: I'm new to this amp and don't want to edit or save presets yet, and would like to avoid for time being.

thanks!

asked 09 Sep 2017 at 05:22 PM

Kevin Burchett
4

votes

0

answers

1.3k

views

Presets need to flow easier between the different management areas.

(Reading the following is really only cumbersome, because that's how cumbersome it is to manage CODE.)

Copying one by one between amp and phone is really cumbersome.
How about an option to copy all 100 presets (or sections) between amp and phone? Both ways.
I want my amp to have the same presets as my phone.
(Others can still have the option the way it is laid out, but I don't see how managing amp and phone separately is useful unless someone really needs 200 different presets in one session.)

I like to have my preset sequenced in a way that makes sense. Artists, cleans, crunch, OD, Amps, or new additions squeezed next to existing ones. Others may sequence by set list or bands. If I shuffle presets on the computer/gateway, then the phone syncs this new sequence, and the amp does not match. Gets confusing.
Additionally, if the footswitch is assigned from the amp, then I have to copy new presets from phone to amp and even reassign to footswitch. Too many steps.

"Just use the presets on the phone and forget amp presets" would be an answer, but what about footswitch? and what about dead or forgotten phones?
Easy (automatic?) sync (with on/off for this auto/sync) between phone and amp, would allow everyone to use the amp (and footswitch) without constantly pulling out the  phone and pairing to have presets from the phone available. Bluetooth drains batteries.
Btw, any phone sounds come on the speaker  when playing because my iphone6 sees the amp as a headphone. So the presets need to be on the amp for any gigs.

Another footswitch suggestion:
A setting or function where the first 30 presets (01-30, without 00) are loaded into the 10 banks on the footswitch automatically? Then I only have to manage my presets within the 100 and everything else is assigned automatically?

asked 18 Jun 2017 at 07:02 PM

michael s (9)
0

votes

1

answer

1.3k

views

haven't even received my Code 50 yet and already doubting my decision the way the app is set up...

how do I add the downloaded presets to the app?

[EDIT: figured out how to manage the library]

why do I have to overwrite original presets to create my own?

[EDIT: seeing now how it adds a backup when I copy another preset on top]

would it be too hard to add more empty banks of 100 to the library?

[EDIT: finally figured out how to view and edit the library in 'My Gateway' tab on this site] 

why can't I select only some of the presets I want to reset to original settings? It's all or nothing for resetting.

 

 

edited 14 Jun 2017 at 04:36 PM

michael s (9)

asked 14 Jun 2017 at 01:38 AM

michael s (9)
2

votes

0

answers

1k

views

Dear Marshall Team,

I have just recently got my code and thanks for this really nice amp. I got world class sounds for this low price and again.. thanks.

Gateway really makes me much happier and  I plan to bring it up to stage for small ocassion, without footswitch (not available in my country), with the help of gateway and no need to bring those heavy gears. But I realize that I can not switch from one to another setup in a short time while playing.

So in getaway, I would suggest to add one tab showing 4 buttons which is, in individual mode, bassically on off switch for prefx, mod, delay, and power. And other 2 buttons for bank up and bank down. 

So, if we have 100 preset then it can be grouped and stored into 25banks with four variation that can be selected from those 4 buttons.

Just like the layout of multi effect processor.

Emm... need a switch to select individual or bank mode... and square bright yellow and red lamps for each button.

Emm... and display to show the active bank and sub bank... like 24.2 (bank no.24 patch no.2).

Sorry if it sounds like asking too much.

Did I?

 

Cheers,

Javen

 

edited 14 Apr 2017 at 04:50 AM

Javen Roth (13)

asked 27 Mar 2017 at 09:18 AM

Javen Roth (13)
0

votes

0

answers

1.2k

views

I just bought this amp yesterday after flirting with a Blackstar HT20 and realising I wanted a Marshall again. Well, starting to wish I hadn't bothered.

Like so many others, I can get my phone (Samsung Galaxy S5) to connect to the bluetooth and actually play music through the amp. BUt Gateway will not find the amp within the menu. I've tried all the uninstalling Gateway, reinstalling, updating the amp's firmware - even tried using my daughter's Samsung S4-mini which again, connected to the audio but will NOT FIND THE AMP!

I have a Samsung Galaxy Tab 4 which is a good wee tablet but apparently isn't compatible with Gateway.

Seriously. So I have 3 different devices and not one of them can connect to my new amp.  Clearly this is a fault with the amp itself since the same thing happens with two different phones.

Please don't tell me to go through that long list of uninstalling, reinstalling, removing the bluetooth device and reconnecting etc etc. I've been doing all that since I got the damn amp yesterday afternoon. 24 hours later and none of it has worked.

Is it at all possible this is going to be addressed SOON in either a Firmware or Gateway update? Clearly, if the amp is faulty I will need to return it soon to get my money back but, honestly, I'm loving the sounds I'm geting with the presets, I just want to edit them rather than all the hassle of returning the amp to the shop!

I saw a review on the Google Play Store for the Gateway app from a guy in June 2016 - that's 7 months ago - and he was having the exact same issue. So if it's not been addressed in all that time and Marshall are still sending out these faulty amps, what hope for a fix? Please tell me there is one!

asked 03 Feb 2017 at 04:41 PM

steven Mckay
0

votes

1

answer

1.6k

views

Hi,
I have a problem when saving Presets from my Marshall Code 25 amp to my phone (Android).
The saved Preset repeats/copies itself about 20 times. Therefore, the app Presets are unusable because I have to scroll down or up 20 duplicates before I reach the next Preset.
There is no way to delete those Presets, and when tapping on one the app freezes.

I already posted this same question in an existing thread in which other people were notifying this same issue, but that post was deleted...
In that post you said you where working in a solution to this, but its have been 5 months since the first report of this problem, so
I'd be grateful if you could fix this as soon as possible and kindly ask you when do you plan to release the Gateway app fixed?

Thanks!

asked 21 Dec 2016 at 12:57 PM

Dake Warren (5)
Showing results 61 to 80 of 85
Loading - please wait...