I created several presets on my Code 50 and named them.   When I log on to the site, however, my Gateway does not show these presets.  It shows the original factory presets.  How do I get my own presets backed up on to my Library and Gateway?

Hi!!

Is there a printable list of the factory supplied Code 100 preset (Amp Firmware 1.44, DSP 1.1, BT 3.1, Gateway 1.5.5)?

Thanks in advance for your help.

George Betts

Hello,

I took delivery of a Code50 last Friday, and already I have noticed a major flaw. I have updated the firmware, and it didn't solve the problem.

1. On many of the presets, there is what sounds to me like a slight buzz or a distorted sound as the chord is being held after about 4 or maybe 5 seconds. Obviously, this isn't going to be good when recording.

For example, I have been using many of the clean sounds, such as, American Clean (preset 32). This is a prime example of the unwanted buzz as the chord fades (only 4 or 5 seconds). There are so many more presets that also have this problem.

The issue occurs through both the Code50 built-in speaker and my Beyer Dynamic DT100 headphones. Using headphones proves that it is not the internal speaker at fault.

I can email a sound byte if you need one.

The last thing I want to do is re-box the amp and return it for a replacement only to have the same issue happen with the next unit. So, please can you let me know if this is a widely known fault because, if it is, I will unfortunately have to send it back for a full refund.

2. A second issue worth noting here is that the clean sounds are not very loud. When wearing headphones, I have to increase both volumes to 10, but I can still hear the strumming of the actual guitar with my plectrum coming through the headphones. The volume on the clean sounds are too weak and definitely not loud enough when also playing through the Code50 speaker, not just the headphones. Conversely, the distorted rock sounds are really loud when the volume is set to a low level, but the clean sounds couldn't be more opposite.

It will be a shame if I return the unit because I love the app and the ability to back up presets and also search for new ones.

Many thanks 

Hello,

I updated the gateway app 5 minutes ago to latest version - my phone is an moto g (gen2) running android 5.0.2. The app worked sort of ok on previous version but now its giving a message as follows.

      "Screen not supported - tThe minimum screen size is 640x960" 

From what I can see under the message though looks to me ok I can see "00 EL34 Heaven" and all the initial presets not covered by the message but thats it nothing works so I guess thats it after about 2 and a half weeks of being apple to control from the app I now find that I cannot do anything from the app.

thanks

alexsunny

WHY IS THERE NO DELETE OR RESET BUTTON ON GATEWAY APP TO REMOVE PRESETS WE DONT LIKE OR PUT ON BY MISTAKE?

on both sets of 100 presets i have  no.00 on amp as JTMChill but on gateway El34 heaven, WHEN I FIRST OUGHT AMP THIS WEEK I REMEMBER SEEING jtmCHILL so why has it been replaced on gateway app and where has EL34 Heaven come from how do i get JTM CHILL BACK ON GATEWAY

could somebody tell me why my preset no.00 on amp was called JTM chill but when i open gateway app its now EL34 Heaven which after looking at all parameters is a completley different preset i just got the amp and havent knowingly changed anything ? which is the default and how do i get them to match?

i have watched all the videos on this but still dont get it .

If i download one of the user presets  from My Marshall does it replace one of the 100 already there  ,or is there extra space that becomes available? and if saving to gateway does it have to replace one of those as when i open gateway library there are just 0-99 ,does this number keep going up?

Hello!

I've registered today on my.marshall.com and added some presets to "My Library" section. The thing is when I go to "My Gateway" section on this site, so I can add the presets I've just added to the library of presets list that I see on the APP on my phone (Android) so I can play them, I see the following message:

You haven't synced any presets from a Gateway app yet.

Click here to download the Marshall Gateway app now.

I've already downloaded the Gatewayy APP on my phone, and I'm actually logged in my phone too, and by the way I've synced my phone with the "Sync Now" button on "My Marshall" section on the APP many times just in case. On the other hand when I enter "My Gateway" section, the "My Library" list of presets I've just added it's there at the bottom of the page, but I can't move them to the 100 preset list that is already loaded in my phone like I've seen on tutorial videos (the 100 presets aren't there).  Seems my.marshall.com can't recognize the syncing. I've logged in and out of my.marshall.com and on the app, with no effect; it doesn't make a difference if the amp is on or off. Any help would be greatly appreciated, thanks!!

It is quite easy to reorganise presets using the My Gateway webpage, which then syncs to the app. However, I like to keep my presets on the app and amp the same, and it is quite arduous to transfer them all manually, is there any way to transfer all presets from the app to the amp at once?

Hi,

Wanting a bit of guidance... still within my first 24hours of ownership. I have the Gateway app, can play music and change pre-configured presets. But when I log into the Marshall site and try to download presets, I click (what looks like the doorway symbol) to download and end up with an 'X' on that symbol. It also says at the bottom of the page that I'm not connected... despite what my phone's settings (Galaxy S9, using Chrome browser) says. Really want to load up some of those presets that some people have put a lot of time into.

Thanks

Peter

how to upload a preset from MyGateway to the Amp  ?

...  not to the Gateway library because this will then not be possible to control via footswitch.
there are also patches under marshallcode.tools from where a direct upload to the Amp is possible via USB.

however, not ideal if this would have to be done twice separately (?)

the library overview in MyGateway is ideal but I can´t find a way how to move presets from MyGateway onto the Amp.

Many thanks in advance for your help

-> meanwhile figured it out:  drag & drop to Gateway Library, then in the App under the individual Preset, select both Amp + Library, press save.

I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library.  I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times.  Nothing seems to work.  I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing.  Does my amp need to be serviced for Bluetooth connectivity?

I used My Gateway to set up all my presets in the order that I'd like them to be.  My Amp is plugged into the computer via USB.  It is connected.  
Now that I've arranged things through My Gateway, the amp does not seem to sync with it.  

IF I pull up the app on my phone, while the amp is off, the library in the app reflects the order that is in MyGateway.  The moment I turn on the amp, and connect my phone to the amp, the library in my phone changes to reflect the old settings still on the amp.  

The only way I know how to set a preset in a specific spot is to go download it again, while my amp is connected, and dialed into the placeholder for which I need it to set.  

Is the sync a slow process?  Should I walk away from it, and let it sit and think for awhile?  Is there a button, or combo of buttons I should be pressing after I've saved my work in MyGateway, in order for it to update the amp?

Hello

Is there any possibility to add user presets from my.marshall.com into android app?

Now I can add them to my library on site, but when I sync in the app nothing happens

Thanks in advance

Just got my Marshall Code 25 and I'm pleased with the sounds, but there are a few presets that I will never use. Is there a way to delete either from the amp or through the phone app?

Why in my "My Gateway" tab, in the list of presets on the left (from 00 to 50) there is the gear symbol for the changes of the presets, but in the list on the right there is not? (from 51 to 99) I cannot copy the presets from the list on the right to My Library without that command !!

Hi

Can anyone give me the standard plexi settings please. I have adj mine so much i just want to reset it to factory Plexi. The marshall app has so many user presets on it now its got beyond a joke trying to find anything, and its in no order!. Thanks in advance

Guys - 

You need to get someone to fix the Bluetooth capabilities with this product line, like, yesterday. I updated the firmware yesterday, which was extremely difficult to do in the first place, uninstalled / reinstalled the Gateway app today, and still cannot connect to the amp except via my phone's native Bluetooth options to use it as a speaker. I am running ios 13.3.1.

I've scoured your web site, I've watched your videos, I've been all over Google and Youtube, and I am nowhere. In addition, I'm legitimately concerned by other reviews that the amp is simply not going to sound as good given I've updated the firmware. Will post again if that's the case. 

I will see if I can push new presets to the amp via a hard connection to my PC, but you need to do serious damage control on this product line considering your leading selling point has proven to not work as intended, if at all. 

This is question about presets.

So there’s mymarshall presets and the app presets and then there’s the presets on my amp.

When I hookup my amp to the app all of the presets change to I guess updated presets that I did not program so I’m assuming they are just new presets from Marshall. Now there’s the iPhone icon and the amp icon. 99% sure they are all the same new updated presets. So how do I use the original ones that were on my amp and those? And do I have room to save the ones I download, without erasing the presets in the app or on my amp?

TL;DR why are there 2 different sets of presets when I connect the app and where do my original amp presets go / how do I use mymarshall presets without deleted presets