What external Wah pedal works best on my Code 100 ?

Hi , I have a Marshall Code 50 and the volume drops suddenly very low and at other times raises very high while im playing and its happening quite frequently. what causes this and what can I do to get it fixed? 

note* the power seems to be ok, no flickering lights or shut off or anything like that and the power cord connection seems to be ok as well.

Hi, I'd installed the Marshall Gateway app at my iPod Touch 4G 32GB with iOS 6.1.6. and the app everytime closed a few seconds after starting. Whats the matter? ... No problems with bluetooth connection to my Marshall Code 25 for music listening. Please help me! - Thanks.

Over the last 4 mos my code 50 amp has developed a buzz with my Les Paul guitar.  I don't notice it with a telecaster.  It is worse when the active pickups are engaged.  If I turn off the amp button it goes away.  

I was truly investigating these Marshall Code amps (the Code 100H really) a few months back until the point that I found your channel. It appeared no one had anything decent to state about the Code arrangement, so I essentially begun looking somewhere else. There was a decent arrangement on a fundamentally new Fender Mustang V v2.0 through a companion of a companion despite everything I didn't know about it until the point that the person consented to go to my band's stick space to give me a chance to take it for a true test drive. Purchased and paid for inside 30 min of playing and I couldn't be more joyful with it in the wake of downloading a portion of your presets. I've since played 3 gigs with it and Fender nailed it on the head. I can perceive any reason why Marshall chose to get into the displaying diversion (it likely has an entirely hot market versus genuine cylinder amps dependent on cost) however I really can't trust how seriously Fender spoiled the Mustang GT arrangement; they should have simply perceived the V2 Mustang arrangement and include bluetooth/USB cell phone bolster, an application to make things less demanding and a more extensive scope of impacts and they would've been cleaning house. At any rate, too bad for the indulgent remark; I needed to thank you for controlling me towards the Mustang. Your demo of the Code arrangement unquestionably sounds superior to anything the others I've heard, however I have no second thoughts as of watching this haha.

It sounds alright (despite the fact that the metal setting was terrible and I like metal!). I do have an inquiry. When you utilize the Bluetooth to change the settings, does it recollect it when you control it down or do you need to change it again every time you turn it on?

Andrew B. Lessard

I know I can override any CODE amp preset with CODE USB connections from the website or by changing on my phone while connected and saving either on the phone and/ or amp.  But How do direct amp changes work with Gateway while disconnected and then synced later on?

 In other words, if I save modifications on my amp to a particular preset and I am not connected to my gateway on my phone, when I do connect and sync later, which setting wins?  Does the phone setting override the amp-stored setting (ie. back out the mods made on the amp / push the settings to the amp from the phone) or does the phone pick up the modified amp setting from the amp and store it in Gateway (ie, pull the settings from the amp and store in my phone)?  

Also, I have the first 30 presets set up for ones I use to perform and are addressable using code programmable foot controller.   If I want to archive/backup those presets someplace to guard against an unplanned need to do a factory reset, does it make sense to store them perhaps in the cooresponding setting in my Library ( the blue section of My Gateway )  That way i can bring them into the amps and store them one at a time from the library back into the presets on the amp, or is there a better way to backup/restore presets in the event of a factory reset?

Thanks!

Hi,

I'm a fairly new user, and have not delved into the software on the Code 50 too much yet, but had a question about user presets.   Since there are 100 factory presets loaded, and it doesn't look like there's anywhere else to store additional presets, I'm guessing I'd have to delete or change factory presets to load any of my own.   I know there's 5 or 6 factory presets that I find unusable and don't mind changing those, but it would be nice to have 30 or 40 empty patch spaces so I could load my own sounds.

Is there updated software I can load onto the Code 50 to let me do this or am I stuck with having to change factory presets?

Thanks for any info

Hi, I need a little help,  I'm a newbie on this...

I know my code 50 doesn't have a "line out" but it features a headphone out, can I conncet the amp to a Yamaha mixer? I want to control my guitar volume with the mixer, plus a mic and an acoustic guitar.

If that is possible, how should I set the master volume, the preset volume and the gain in my marshall?

thnak you!

Hi

I have recently purchased a Code 50 Combo Amp and am really glad I did as I am not gigging and to be honest the Code 25 would have been ample, the master volume is almost off and in my living room if I were to turn it up to a quarter I would lose my windows and my neighbours! Anyway my question is about the two mini jack sockets on the amp one for headphones one for mp3 player. Are they both stereo and can I use a phone or laptop as the mp3 input. I think I recently  read an article that said they are dual mono. The reason I ask is I have headphones but no lead to connect a phone or my laptop so I would be grateful if you could tell me what to order on ebay. My email is daistar@hotmail.co.uk

Many thanks

Dave

Hi there.  I am not a native but I hope you'll be able to get me right.I have been using Dsl 15c for about 2 years and all of a sudden the amp stoped producing any sound. All controls freeze, footswitch is non responsive. Led’s and tubes are still lit. No pedals in line. I turn power switch off then on and hear sound like a relay click in the background and then sound immediately cuts out.  My tech told me the problem is 99% in the microcontroller AT2313 because inside all fuses are still intact.  He was able to read the code and fix errors that cut the sound out. However, it did not help because some of microcontroller ports were damaged(most likely it was a factory defect). Is it possible to re-record the code to new microcontroller or maybe there are some other options to consider?

Thanx.

Hi! I'm doing some experiences and trying to get new sounds. My question here is: can I plug a microphone in my CODE 50 and sing? I mean, can I do this like in an analog amp? Or does it have some problem with impedance or voltage levels? It's not a condenser mic, it's a dynamic mic.

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

Hi Everyone,

I have a CODE 50 amp...

1. Connected from PC using AUX cable so YouTube/Songsterr etc plays through amp.

2. USB connection to same PC for recording to Audacity.

When I play (headphones in) Audacity records the guitar perfectly but doesn't acknowledge the PC audio. I can hear both the PC audio & guitar track clearly in my headphones.

Is there any way to fix this?

Thanks!

Gateway app working well except for playback. It crashes every time I tap to load a track. I have a purchased song (from iTunes) ready to go. Am I missing something?  Apple iPhone 8+ and Code 50 

I've read the manual and apparently the volume knob controls the volume of whatever preset is selected.

I'm running a Marshall code 50 with boss gt1 pedalboard so my question is, if i want to my sound to be controlled via pedalboard shouldn't I be able to turn volume knob all the way down and only control the amps volume with master volume knob? Because the moment i turn the volume knob down i dont hear anything.

I'm just trying to get a more deeper sound, the sound i get is just way too bright

I am about to purchase a Code 100 Head , all I have is a 4ohm 212 Cab. Is this okay to do. I know offically it is not, but for tube amps I've heard this is fine to do.

I have a Code 100... it has worked great for the last year. The last couple of gigs not so much. When I turn it on...I get no sound. I get sound through the headphone jacks, but nothing through the speakers. Then, out of nowhere it starts working...?? 

Very frustrating....any input would be great!

Hello, Marshall forum family.  I just purchased the CODE 100H (head only).  I have a Marshall cabinet with 4x12 MG series, and I hate the sound of this combination! Does anyone have advice for a replacement speaker?

Thank You All

Jon Doty

Lincoln, Nebraska

Hi, my marshall code 25 has a bluetooth issue. It's failing and cuting the sound when i take the cellphone at 2 meters from it. I've already updated it, but it still happening. What can i do to solve it?

I can pair my code to my phone and connect but the Gateway app won't communicate to the code. What do I try next.