Questions
Showing results 81 to 100 of 1921
0

votes

0

answers

64

views

I'm using a google pixel 2 and the app is not connecting with the amp although the phone IS already connected to the amp.

 

I've tried my wife's samsung s9 and it works ok. 

 Edit. Ok, Now It's working. But not only i had to forget the device, I had to do a Bluetooth, Wifi and Mobile reset. And after I reinstalled the app. 

The reset option is located in Settings>System>Advanced

So everyone else having the same problem and still not working after forgetting the amp on Bluetooth settings and reinstalling the app should try this instead.

Can't be more happy with the amp

I hope this can help anyone.

CODE Gateway

edited 02 Apr 2019 at 06:34 PM

Ezequiel Facundo Otheguy

asked 01 Apr 2019 at 10:29 PM

Ezequiel Facundo Otheguy
0

votes

1

answer

88

views

I have, or should I say, HAD a Marshall CODE 50 which after 20 months of service decided to quit following a POWER SUPPLY failure.  I took it to an electrical repairer for diagnosis and found out, through Marshall Australia and UK that the power supply is not replaceable because it has been suspended.  No parts available.  That means I now have an amp that is unfixable and never will be, even with an aftert-market power supply - which, according to Marshall cannot be retro-fitted.  What a fantastic waste of money that exercise was, and I have zero warranty fall-back.  Has anyone else had the same problem?  Kev

CODE code50

asked 01 Apr 2019 at 03:01 AM

Kev Lawlor
0

votes

0

answers

35

views

 4/1

Follow up: Tried contacting Marshall with email provided. Every time We prove we are not a robot, 3 of us verifying code, it says wrong code and blows us out? If anyone has info on a remedy, either replacing my Code 50 amp and or footswitch, or some pattern of buttons to hit to correct, I'd rest easy. 

Problem,

On any of the 30 presets I've programmed to footswitch and change to switch mode for effects,  the 1 button and 3 button turn on and off together. 2 works fine. It all worked great till a few days ago.  I see a advantage of programming 2 effects with one button...... But I want out of that.

 

Greetings, 

     Got everything working great........till assigned FX switch 1 or 3 turns on and off together. 2 is the only independent. Figured I must of hit something just wrong....... Searched, experimented. What did I do wrong? 

 

       Cheers,

              Scott

 

 

CODE

edited 01 Apr 2019 at 10:34 PM

sj bennett

asked 30 Mar 2019 at 07:01 PM

sj bennett
0

votes

0

answers

76

views

Hi!

Please help me, Marshall.

I can't connect Marshall Gateway version 1.4.9 running on my cell phone Moto Z Play with Android version 8.0.0 to my Marshall Code 25. The button "Scan for Amps" does not work. Even if I click "Auto-connect" option it does not work too.

I've tried all the solutions on https://my.marshall.com/support/faq/838/code---gateway-bluetooth-connection-troubleshooting without success.

The Bluetooth on my cell phone is on and Code is paired with Marshall Gateway.

Look at the screenshots.

Kindest regards,

Fábio

 

 

CODE Gateway Bluetooth Android

asked 30 Mar 2019 at 03:56 PM

Fabio Peruchi (1)
0

votes

1

answer

32

views

Hi !

Any suggestions for Kings Of Leon presets please ? 

Presets

asked 29 Mar 2019 at 09:29 AM

Shmuel Amsili
0

votes

1

answer

41

views

asked 29 Mar 2019 at 04:33 AM

ameer zainal
0

votes

0

answers

49

views

Hi 

Would a footswitch PEDL-91003 work with a Valvestate V8080 ? 

Or it needs to be the PEDL-91004 ?

The reason I'm asking is because the PEDL-91003 can go from Clean / Crunch / OD1 / OD2 and the other just Channel / Reverb.

Please advise

Footswitch

asked 28 Mar 2019 at 09:09 PM

Eric P
0

votes

1

answer

56

views

Hi Team Marshall,

My Code 100 combo has a constant mains hum wherever I have it plugged in, even without any guitar/lead plugged in.

Is there a fix or work-around for this as is very distracting when practicing etc?

Strangely, this doesn't come through when using headphones, but the volume is much lower when using them!

I do not have this issue with other amps or audio equipment plugged in!

 

 

 

 

CODE

asked 28 Mar 2019 at 05:44 PM

Michael Lawson
0

votes

1

answer

114

views

Hey, Marshall! I connect my iPhone 8+ with my 100H without any problems. I’d like to dedicate a cheap tablet to it, in order to have a bigger screen and touch controls, and mount it to my mic stand. Does the Amazon Kindle Fire Tablet work with the gateway app? I know iOS and Android are compatible. What about Fire OS, or whatever it is that Amazon runs? Thanks for answers. 

CODE Gateway iOS Android

asked 28 Mar 2019 at 01:17 AM

Mark Solis (2)
0

votes

1

answer

83

views

Some on the the presets like Blues Legend dont work at all with my Fender Squier Affinity Series Stratocaster while some others like Marshall Fury and most other metal presets have a background noise...... Pls help me.

 

Presets Code25

asked 27 Mar 2019 at 11:21 PM

Aishik Dutta
0

votes

0

answers

59

views

After a "successful" installation or re-installation, the amp itself says its still on vers. 1.11. I've been having loads of problems with my amp, and was hoping this could be an easy fix. I can't control the settings from the actual knobs on the amp, I can't connect the amp to the app, and the sound quality is thin and lacking... I was really excited to own a Marshall. Now, not so much. Not very impressed. Neither the AMP nor the APP works like any of the demo videos state. Super frustrating. Please help.

Gateway Firmware App Problem unhappy

asked 27 Mar 2019 at 01:04 AM

Jameson Blaylock
2

votes

3

answers

201

views

Boss is in version 3 of it's Katana amps: 
https://www.boss.info/us/whats_new/press_releases/2018/BOSS-ANNOUNCES-VERSION-3-UPDATE-FOR-THE-KATANA-GUI/

Fender Mustang GT is in version 2:
https://www.fender.com/articles/gear/explore-the-new-amps-effects-and-features-in-the-updated-mustang-gt-2-0

Are there any plans to upgrade the Code to 2. 0 to include additional amps and effects?

 

 

CODE Firmware

asked 26 Mar 2019 at 08:50 PM

Pat Brown (22)
0

votes

0

answers

36

views

I Have a Lin 6 / Yamaha variax guitar.

What the best setting when I use this electric guitar in the "Acoustic Guitar mode"?

CODE

asked 25 Mar 2019 at 08:40 PM

Roland Sleijpen
0

votes

1

answer

55

views

Can I run my Marshall Code 100 Combo amp into the 2x12 Code Cabinate?

if yes, will I need to run it through a power amp to push more wattage to the cab?

CODE

asked 25 Mar 2019 at 07:07 PM

donald birmingham
0

votes

2

answers

58

views

Is there a way to turn this up or down in the amp itself? This would be a big help. I feel like the auxillary volume coming from my
computer or phone is always too low.

CODE

asked 25 Mar 2019 at 12:21 PM

Pat Brown (22)
0

votes

6

answers

109

views

Hi,

I use de Plexi/Classic 100W for an Angus Young tone. When I crank up the volume above 1/3 I got a lot of feedback noise. It is like the sound of a mic that picks up its own sound from a speaker. Whatever I try do to, it won't go away.

I bought this amp with the CODE 412 Cabinet for stage performances, but it is unusable this way. Can you please help me to solve thsis problem?

Kind regards,

Paul

CODE Speaker Cabinet

asked 24 Mar 2019 at 03:26 PM

Paul Haullussy
0

votes

1

answer

77

views

Hello! At Marshal Code 25, the power transformer mount was broken. The transformer pressed against the speaker, the result was a very loud sound and a lot of low frequencies. Fixed the transformer with two screws as far as possible from the speaker, the combo began to work perfectly. Transformer mounting is very unreliable.

edited 29 Mar 2019 at 02:01 PM

Vladimir Vasilev

asked 24 Mar 2019 at 05:55 AM

Vladimir Vasilev
0

votes

2

answers

39

views

My Code50 amp smells like an electrical fire after it's played for about 20 minutes, any help?

code50

asked 23 Mar 2019 at 09:40 PM

Brian Gilboe
0

votes

0

answers

74

views

Hi 

I have a TSL 100 that gives low output on crunch and lead channel. (no tube problems)

I´ve seen that this problem is common. Do you have a suggestion what could be wrong?

I suspect one of the J-Fet switches are faulty but I can´t locate any faulty ones?

(I do amp service part time)

 

Regards / Lars

 

Tubes amp

asked 23 Mar 2019 at 08:03 PM

Lars Karlsson
0

votes

0

answers

44

views

Can I use an Boss ME-80 multi eff pedal with the code 50?  If so, are their any problems to be aware of.

CODE

asked 23 Mar 2019 at 06:48 PM

Greg Ward
Showing results 81 to 100 of 1921
Loading - please wait...