When playing, randomly my code 50 will lose volume. I can restore the volume to normal levels by stepping on a button on the footswitch but then it will cut back out over and over. How do i fix this? Is there an update i can do? I have swapped the cable for the footswitch and my input. This is incredibly frustrating when trying to get through a rehersal session. Pleaae help!!!!!
I've noticed that when switching channels, specifically from any other channel to the Clean channel in Green mode, I get an audible pop. Not like a firecracker going off, but definitely bothersome. If I set the Clean channel to Orange mode the pop does not happen. So, the pop only happens when switching to Clean/Green. This pop occurs when switching via the front panel buttons or my midi Voodoo Lab ground Control.
I've had another JVM410H owner try to reproduce the issue, and they experienced the same pop when switching via the front panel buttons, but did not experience the pop when using the Marshall footswitch.
How can I correct this?
how to upload a preset from MyGateway to the Amp ?
... not to the Gateway library because this will then not be possible to control via footswitch.
there are also patches under marshallcode.tools from where a direct upload to the Amp is possible via USB.
however, not ideal if this would have to be done twice separately (?)
the library overview in MyGateway is ideal but I can´t find a way how to move presets from MyGateway onto the Amp.
Many thanks in advance for your help
-> meanwhile figured it out: drag & drop to Gateway Library, then in the App under the individual Preset, select both Amp + Library, press save.
While attempting to set up the footswitch (more help needed there), I somehow duplicated 01 So American over 92 19x12 and it is gone. I liked both of them and have been unable to get back 02, even with factory reset of the amp and footswitch.
Any thoughts would be appreciated!
Are there anywhere on internet Marshall Code and footswitch 91009 manuals in polish language? English is available with no problems. Regards, Jacek
Would this footswitch work with this combo amp?
Hi, what footswitch is used with theAS50D? It said in manual PEDL-10029 can not find one to buy?
Thanks
Regards
I recently purchased a used Marshall Haze MHZ 15 amp, but it did not come with the footswitch. Can you let me know which one of the myriad of marshall footswitches will work with this amp, and possibly where I can buy this.
Good day
I own an AVT 2000 valvestate guitar amp +/- 15-20 years old and lost the cable in a move to connect the footswitch to the amp. Is it possible that you can send me a diagram so that I can make up a new cable and also advise which type of cable to use.
Thank you in advance
I was wondering what Marshall foot switch I could use and if it is still available? If not, do you know of any aftermarker ones on the market?
Thanks
Hi all! I'm building a new pedalboard and was considering getting this footswitch... Anybody who has one, want to measure it for me? Thanks!
Im about to purchase a secondhand AFD100 that does not include the footswitch. I want to make one but im unsure of the layout. Will I be able to use a DSL footswitch and add LEDs. Could anyone provide me a photo of the wiring or any diagram as I cannot purchase one new.
Thanks
Hi!
I have a Marshall DSL40CR and a PEDL-91016 footswitch.
(By the way, there is no manual online for the PEDL-91016 footswitch.)
Is it possible to program the footswitch for particular combinations of channel + master volume. What I would like is...
Button 1 = Classic Gain Green + Master Volume 2
Button 2 = Classic Gain Red + Master Volume 1
Button 3 = Ultra Gain Green + Master Volume 1
Button 4 = Ultra Gain Red + Master Volume 1
Button 5 = Master Volume (toggles MV 1 and MV2 ...no change to default functionality).
The context is that I want my Master Volume 1 to be "Rhythm Loudness" and Master Volume 2 to be "Lead/Solo Loudness." However the loudness for the Classic/Green channel is too low so I want to default it to "Lead/Solo Loudness" (aka Master Volume 2) for unity loudness to the other rhythm channels.
Thanks!
-James
I have a AVT150, footswitch stolen!!!
Am looking for a replacement but retailers telling me that it is no-longer in production. This is the 6-button configuration. My question:
- can I buy one from Marshall
- is there a 3rd party or compatible option
- is there a spec/schematic that I can use to build one
Hi there!
I've got the MG101CFX with the PEDL 90010, and the CLEAN/CRUNCH isn't working. It's clicking like it's working, and the OVERDRIVE button works. The amp also changes CLEAN and CRUNCH by pushing the button on the amp. Any ideas?
Hi!
Can you advise please ? How can I configure two presets/chanels for one knob in the footswitches? I need to switch two presets with oneknob?
for example : Rhythm guitar to solo (different chanel with the addition of an effect through FX Loop) and back to the Rhythm mode?
I've 3 Marshall AMP
1. AFD 100 Slash signature with Footswitch Model : PEDL-00053 (2 channel footswitch)
2. SL 5 Combo, Slash signature with Footswitch Model : PEDL-00009 (2 channel footswitch)
3. Marshall 2555X Silver Jubilee Re-Issue with Footswitch Model : PEDL-90003 (1 channel footswitch)
My plan is to mount my AFD 100 , Footswitch Model : PEDL-00053 to pedal board and use this Footswitch as main Footswitch to all 3 amp
Could you please confirm Marshall AFD 100 Footswitch Model : PEDL-00053 compatible with PEDL-00009 & PEDL-90003 ?
or any concern If I use PEDL-00053 for all 3 amp ?
Thank you very much for your information.
I bought a used JVM1C from GC and it it didn't come with a footswitch. They gave me a single button Blackstar FS. It doesn't work. I think this amp uses a single button FS to switch channels. I can't believe I can't find anything on the internet to identify the replacement switch.
Hi
I recently bought a Marshcall Code 50 and I have two old footswitches (a Behringer and a Boss Dual foot switch FS-6). All I want to be able to do is cycle between presets on the code. On both the footswitches the code only cycles backwards, and not forwards at all. Is there a setting on the code somewhere that I need to change so that I can cycle either way through the presets?
Much appreciated