Questions
Showing results 81 to 100 of 3374
0

votes

1

answer

239

views

I love this combo amp. It was working fine but the sound just stopped to a low whisper. I swapped the speaker, and the 12AX7 tube, but no success. You can barely hear sound but the guitar's and amp's volumes has to be 100%. The headphone out is doing the same thing. Can anyone provide some insight? Thank you all.

asked 31 Jan 2022 at 04:18 AM

Rodney Thomas
0

votes

0

answers

251

views

Hello, I would like to replay "I Surrender - Hillsong (Worship)", however I cannot find a suitable preset for it. Could someone help me and set up such a preset? 

Thanks a lot, Tim

asked 30 Jan 2022 at 05:04 PM

Tim Thiessen
0

votes

0

answers

224

views

Hello Team, 

On the manual of the DSL1hr Vietnam its says that speaker is allowed only 16ohms.

But on the DSL1H (50th Anniv) it is mentioned it can be both 8 and 16 ohms.

Not sure if the Vietnam version can use the 8ohms as well? and it was not published on the amp or manual?

Please advise

Thanks alot

Mike

asked 27 Jan 2022 at 06:25 AM

Mike Burny
0

votes

1

answer

134

views

Hi!

I bought a Marshall CODE 100w in Oct/22. It wasn't even used 10 times.

Yesterday when I went to turn on the equipment, the amplifier started to make a noise. I thought it might be the cable, but it wasn't.
Even without the cable connected to the equipment, the noise continued.

I reinstalled firmware but it didn't work either. ?

I do not know what to do.

Could you please help?

edited 27 Jan 2022 at 11:55 PM

Gary Brady

asked 24 Jan 2022 at 04:55 PM

Gary Brady
0

votes

0

answers

151

views

Hello, I am making a big purchase for my first tube amp and amp between the Marshall JVM 410 head and combo versions. So, obviously, the head offers more flexibility in terms of cabinet selection etc. However, the 410 combo also has a line out so that too can be paired with any cabinet if I am not mistaken. If that is the case, why don't more people gravitate towards the combo? Is there anything that the 410H can do that the 410C cannot? All feedback is greatly appreciated.

asked 24 Jan 2022 at 07:45 AM

Nick L
0

votes

0

answers

139

views

 olá galera ...Não consigo trocar a música do playback no aplicativo Marshall Gateway.. já desinstalei e instalei o aplicativo e a música do playback não apaga,?hello guys...I can't change the playback music in the Marshall Gateway application.. I've already uninstalled and installed the application and the playback music doesn't erase,?

asked 23 Jan 2022 at 02:49 PM

Denio Netto
1

vote

1

answer

228

views

Hello -  After really enjoying the Kilburn II speaker, I bought two Acton II speakers to couple them for ambiant sound when not using traditional speakers since you can't couple Marshall's wireless speakers. The Acton II is fantastic for sound and range individually *before* my attempt to couple them. I've had many complex compatibility issues with products over the years, but in this case, it's most puzzling why two same-model "coupled" speakers can be controlled via the iPhone/iPad I paired with them, as well as with the Marshall app (volume/sound settings) but cannot in any shape or form maintain simultaneous outputs even when they're placed right next to each other (well within the 10-meter Marshall spec). So before returning them back to store, I wanted to check with other customers if they've ever truly achieved the goal of coupling two Acton II's with both of them continuously and consistently playing in tandem without streaming drops. Thank you for letting me know,

What I've tried to so far:

- Followed Marshall's pairing/coupling intructions word-by-word. Though their instructions are incomplete and way below their reputation. 

What's more disappointing is the prompt you get in the app to "stay connected to Acton II but disconnected from Acton II in Bluetooth settings." Anyone know what that means? 

- Tried two iPhones and an iPad (all latest iOS).

- Deleted, rebooted, and re-installed the Marshall Bluetooth app (v1.3.1) for iOS.

- Moved the speakers next to each other to eliminate distance argument.

- Tested each speaker with direct Bluetooth to iPhone/iPad source without any issues. In fact, range is so much more when not using the Marshall app to stream to the speaker.

- Factory-reset the speakers.

- End result: The only way I was able to have them coupled was ignore their instructions, couple the speakers and then completlely shut down their app. after they show as coupled . However, there's no way for them to continuously and play in tandem (even sitting right next to each other with source iPhone/iPad next to them). They continue to switch between each other. 

- Also, Marshall needs to be clear that a "couple" can only function with one lifetime source. As soon as you try to use the speaker "couple" on another source device, you lose everything on the previous device and need to de-couple, forget speakers, re-add speakers to your device's Bluetooth, and then pray that the Marshall app will allow you to couple them again. Most of the 18-20 times I tried the whole process, I needed to uninstall their app, reboot device, and re-install their app. :(

Any help deeply appreciated before I return these speakers.

 

edited 29 Jan 2022 at 07:18 AM

Farzam T (1)

asked 22 Jan 2022 at 05:30 AM

Farzam T (1)
0

votes

0

answers

126

views

Hi All,

I have an immaculate first issue anniversary Silver Jubilee head and cabinet that I want to sell but going through some specialists etc the valuation is disappointing.

I went on a tour of the factory a few years ago and my guide was surprised that I had such nice gear and commented that there was only 800 0f them made as a first run !

Can anyone give me a guide to the valuation ?

 

Many thanks.

Dougie

 

asked 21 Jan 2022 at 08:29 PM

Dougie Brownlie
0

votes

1

answer

132

views

My 2016 Code 50 has a non functioning power supply, i am in Australia and so far both E-mailing the local parts supplier and Marshal support has fallen on deaf ears , I am seeing all over here that there is no replacement for this power supply , if this is so , I can't believe that marshal would release such a shoddy product , it actually is quite a nice little amp , my jcm 800 and 1959 SL have been running since the 70's and eighties rock solid , I guess my question is can someone steer me in the right direction, because I don't want to have a brick in my studio 

asked 20 Jan 2022 at 07:39 AM

JP Mchugh
0

votes

1

answer

180

views

Hi,
I tried to connect Marshall Gateway App to Code 25. (Firmware v1.46)
While Bluetooth connection between mobile and Code25 basically is set up and I can even stream music to it,  the app says "You may only control amps you are already connected to for audio output".

I cannot connect the app to the amp.

Maybe anybody can give me a hint.

Cheers,

Martin

 

asked 19 Jan 2022 at 09:01 PM

Martin Hollinger
0

votes

0

answers

274

views

My Code 50 Makes a weird Hissing/Crackling sound when I am using the USB Input on the amp and using it in Reaper, Can anyone please help?

edited 18 Jan 2022 at 02:35 AM

James Lingerfelt

asked 17 Jan 2022 at 07:40 PM

James Lingerfelt
0

votes

0

answers

145

views

     hi there , 

 

    Is anyone else having the same issues downloading user presets from Marshall.com ? I have a code 25 and ive already installed the updated firmware , however im still having issues downloading the presents when i'm connected to my computer.

asked 16 Jan 2022 at 09:28 PM

michael bumpus
0

votes

0

answers

118

views

I recently purchased a Marshall SC20H, I have noticed that there is a lot of "noise" in the amp when the FX loop is engaged. The nature of the noise is broad band hiss, similar to white noise. I am wondering if there is something I can do to remedy this problem, or if this is a flaw in the unit.

Your advice would be much appreciated.

Thank You

asked 14 Jan 2022 at 10:55 PM

Dan Mead
0

votes

0

answers

194

views

I have downloaded app and it keeps saying not available ( the 3dx questions) I have deleted and nothing is working 

asked 13 Jan 2022 at 03:06 AM

Josh Schwartz
0

votes

2

answers

270

views

Hi,

New to the forum, and new to valve amps. I have just bought a Dsl20cr, and I've spent the last 40 mins on standby mode to allow the valves to warm up.

Unfortunately, I'm still not getting any sound out of the amp.

Any suggestions would be greatfully received.

Regards,

Karl

asked 11 Jan 2022 at 04:01 PM

karl forde
0

votes

1

answer

209

views

We have two Marshall Acton Multiroom that have the exact same issue. Whenever they have been plugged in the power for more than 24 hours the sound becomes distorted/crackles and it gets increasingly worse the longer the speaker is powered on.

The only solution we have found is to pull the power plug for a minute before plugging it back in. Then the speaker will play fine for another 24 hours before it starts to crackle again. However, this solution is very inconvenient.

We have reached out to the Marshall support but they are not much of a help.

Has anyone else found a solution to this issue?

asked 09 Jan 2022 at 03:51 PM

N M
0

votes

1

answer

156

views

I recently noticed on my marshall amp an additional audio jack port thats beside the port for the headphone jack that i use my headphones with, I wonder what it is used for does anyone have an answer? 

the amplifier in question is the marshall MG10G

asked 08 Jan 2022 at 08:32 PM

mix U.
0

votes

1

answer

205

views

Hi,

when will be the Marshall Code 100H (Head) available in stores in Germany again?

I'm wondering that it's not shown on Marshalls website anymore. Is it discontinued?

Kind regards,

Alex

asked 08 Jan 2022 at 04:59 PM

Alex Thies
0

votes

1

answer

218

views

Hello, everyone! I'm looking to buy a Marshall Code 25, and I've heard that plugging a bass guitar into a guitar amp can damage it, therefore I'm wondering if plugging a bass into the amp and recording it through the USB port will harm the guitar amp.

asked 08 Jan 2022 at 09:34 AM

rony yadav
0

votes

2

answers

371

views

Hello Everyone, 

I bought the Marshall code 100 Head as a second hand after watching the positive reviews of it, and I really liked the sound and its features!


I plugged it to a 1 x 12 Cabinet and it works good except for my big disappointment with the hissing white noise that i was getting even when the master volume knob on the amp is turned all the way down. 

I tried every simple solution that i could come with, including turning off the computer in the room, I tried resetting the Amp to factory settings,  I even installed the new firmware from the marshall website.  but none solved this issue.
Does anyone know the solution for this problem? 

Thank you very much in advance

Hossam Othman

asked 07 Jan 2022 at 11:31 AM

Hossam Othman
Showing results 81 to 100 of 3374
Loading - please wait...