I am the happy owner of the TSL60 JCM2000 amplifier. I am an electronics engineer. For me, the regulation process is very simple, only the correct value is important. I would like to check if the BIAS value is correct after several years of use. I also wanted to know this value in case of changing lamps for new ones. In this amplifier, only one potentiometer is used for adjustment. There are three control pins. Pins 1 and 3 give the same values. Pins 1 and 3 are shorted? What should be the correct voltage value between pins 1 and 2 as well as 2 and 3? 40mV or 80 mV?
Hello all, I have an older amp MG15CDR. Bit of a problem with it. Crackles when you turn the gain pot or the tone pot. Seems to be worse when just turned on. Maybe it's the potentiometers need replacing? Anyone else had this problem? I can't see that Marshall will supply just these parts.
I would like to repair it, as it is a great little amp, suits my needs well.
I have code 100 and I got (DigiTech Trio+) and I would like to know
how to connect them together properly
I'm not sure if they work together or not???
When I connect the DI output of my new Origin 20c to my recording system (ART USB Dual Pre into Logic Pro on M1 iMac) there is a constant hum. A noise gate set to -30dB just cuts it out. The combo speaker itself is silent. I cannot find any help on the Marshall website!
Before I start playing with the amp, are the user created presets stored separately from the inbuilt ones? I've read through the manual and got the impression that if I save one that I have created then it will overwrite the last one I was using?
"Context3D not available! Possible reasons: wrong renderMode or missing device support" error message on iPhone 11. All I see when I open the app is a red bar with the error message in white letters. Any idea how to fix this?
The reverb doesn't switch on and off... Is the footswitch specific to the amp? I purchased a 91004 as the amp didn't come with one when I purchased it. The gain button works...
PS. I saw this picture in a CL ad, which got me wondering
There are multiple phones that use the Emberton speaker in our house. When one phone is playing music through the speaker using Spotify and another person enters the room with their phone, the speaker will always switch to their phone. It could be anything such as a video from social media. It pauses whatever the first connected phone was playing, and interrupts any music playing.
We also have an Acton speaker and have had no issues over the years. At first I thought it was a fault with the Emberton and have had it replaced under warranty. However, the new speaker is doing the exact same thing.
Anyone else experiencing this and (hopefully) have a solution?
I have been experimenting with the DI out on my SC20H. In the manual it says it is an "emulated loudspeaker" output however it sounds terrible direct into my DAW. Once paired with a IR it sounds pretty good so I am wondering if this is an error in the manual or if it just sounds bad and should be avoided?
Code 50 won't connect to blue tooth
I'm new on this forum. I bought a brand new JVM 215C and a Use it with a Fender Strat.
I bought the JVM beachse of the fat sound I saw on different websites. The sound is not what I aspected and heard on YouTube. The clean channel green/orange and red also sound almost the same to me. I'm a rookie.
could it be an hardware problem? Or has the amplifier need to be tuned?
thanks in advance for your reply!
Poseo un CODE 100 combo con firmware v1.44 y mi amplificador funciona sin ningun problema, quisiera saber si la nueva version 1.46 realmente trae una mejora respecto al sonido especialmente en los graves, que suenan un poco embarrados, es decir si vale la pena la actualizacion ya que mi amp esta ok, o es solo solucion a problemas de bloqueo como dicen por aqui.?
All - have just purchased a Line 6 Pod GO multi-effect pedalboard. Any tips / guidance on optimal setup with thew Marshall Code 50 amp?
I’m trying to decide which amp to get. My ultimate goal is to get out there and start gigging. I love big, dumb rock songs and have more or less narrowed down my search to a JCM 800. Here’s where my dilemma comes in.
For the same price, I can get either 1990 JCM 800 (50 watt) and a 1960A cab of indeterminate year or the little SC20 amp and cabinet.
Since I want to start gigging out, I am leaning toward the full-sized amp, with worries that it might be too loud even. However, since most of my playing is at home, I like the idea of the lower powered SC20. The one I played sounded super good at around-the-house levels. I am worried it won’t suffice if I try to gig with it. I have never played through an 800. (Or any half stack, for that matter. Right now my main amp is a Deluxe Reverb.)
So I guess what I want to know is which one is the better option for me? Do I prioritize stage volume or home volume? Does anyone even need a big, loud amp nowadays, or is a smaller, miked-up amp better in the long run?
Hi all at Marshall
i am looking at buying Amberton. its serial number starts with 73400553E12191E.
how can i look up this SN to see if its legit?
I have recently received the Marshall Acton 2 speaker which has a very good sound and design.
However it works only on my IOS phone, under Windows 10, I can pair the device but get's a message of battery low and cannot choose it as speaker.
Can you help me? 10.0.0.0.1 192.168.10.1 192.168.10.1
I have a Marshall DSL40C-U and love the AMP.
How do I plug and external cabniet into the AMP and which cabniet from ? is compatible?
There are several input output jack in the back of the AMP. I'm not certain which one to use.
Thanks in advance,
hello'can anyone suggest a better sounding speaker on my code 25 as i do not like the stock speaker that came with it.sorry marshall.thank you.
My loop pedal records clean and plays back through the code, but when I play over it the loop signal breaks up (sounds distorted). This does not happen through my straight fender amp.....any ideas?
How does a downloaded preset from this site get into your library on the code 50 itself. There are no directions. I have it in the library on this site and have exchanged it with preset numer48, but it doesn't appear on my code.