Hello, can anyone tell me which brand / model of speaker is used in code 25?
to whom it may concern.
I would like to ask a help with the preamp layout in JVM 410 (2007). I have found this online but it says "Assumed". As you know the tubes on board starts with with V1 a power tube to V4 so it is hard for me to assume.
Could you please confirm if this diagram is correct (bottom right of the picture)?
thanks in advance,
I'd really like the ability to roll back firmware updates. The tone of this amp has got worse with each firmware update I've installed. I wish I would have left it at the default when I got it.
The first firmware update I installed ruined the DSL, and 50's British amps, and now this last update has ruined everything else. All the presets I created sound completely different now. What a waste!
I'm really beginning to regret buying a digital amp.
I just ordered my CODE 25 but I couldn't find any info about bluetooth playback, only via input jack.
Is that possible? Thanks a lot!
Hi, I am trying to register this product on your website but it keeps telling me there is no model number. How do I actually register a stanmore speaker?
Hi I have had this Marshall Code 100 for a few weeks now, mucking around with it to try and figure it out and finding it to be a little user unfriendly. What I want to do is to change a single preset to what it was originally (eg factory setting) without doing a factory reset and losing all my other changed presets. I cannot find any joy anywhere about this. Also, when I look at the list of 100 presets online (there are a few lists going around in chat forums and also in the gateway section of this website) I can only ever find the 100 presets that are on the phone gateway app and not the list that was originally on the amp (for example on my amp when I factory reset it, 00 is JTM Chill, 01 is "So American" etc, whereas my gateway library has 00 as EL34 Heaven and 01 as Plexi Classic). So I cannot find the actual standard amp preset list anywhere online or within the Gateway app.
My questions boil down to three:
1. How do I restore an individual preset to what it originally was (without performing a factory reset)?
2. How do I even know what the original preset was called?
3. Say I connect my smartphone to the amp via gateway and bluetooth. If you click on the arrow on the right hand side of one of the presets in the library, it takes you to another screen. In that screen it has an amp section and a library section, with 2 small boxes you can tick next to each. What is the purpose of this screen and ticking the boxes? Like what can you actually change on this screen is it just the name of the preset or can you replace a preset that is on the amp with one that is in the gateway library?
Needless to say I am very confused and was hoping to be way ahead by this stage. Please help!
I have got 2 Marshall Speakers of my Grandads with 2 different serial numbers on.
- A 42039
-Ser No. 54995
if anyone is able to tell me what year they were made what would be a huge help
I just got a Marshall TSL 60 head and am having trouble with the footswitch.
Of the five buttons: Clean - Crunch - Lead - Reverb* - FX Loop*
The Reverb and FX Loop are both latching switches and work fine. The Clean, Crunch and Lead switches are all momentary and there's some sort of digital logic switching going on on the board. The problem is with these switches.
When I turn the amp on, the Clean switch LED comes on. When I hit the crunch or lead switch, nothing happens (No LED, no change from clean).
I thought it was an issue with the switches, so I replaced them. Now Crunch and Lead still do nothing, but when I hold down the Clean it switches to Overdrive for as long as I am holding the switch. When I let go, it goes back to clean.
Anyone have any thoughts why the switches aren't doing their job? Could it be a fried transistor that's supposed to be controlling the logic switching that's going on (Anyone know a good way to test this?). Some more info on the footswitch...
[DIN Pin Guide](http://i81.photobucket.com/albums/j202/paperboy38375/Forum Pics/tsl100switchinginfo.gif)
[Another Board Pic](http://i281.photobucket.com/albums/kk224/chrisdrane/TSLInternal_zps056b5334.jpeg)
Hello Marshall. My Code 50 was connecting the other day and tonight I could not get it to connect. I am getting a message similar to this: Can only control an amp you are connected to. Something similar to this. Like my phone is connected to another Marshall Code. I only have one Code amp. My phone is connected to the amp in my bluethooth settings and I see the amp in the Gateway app. I have tried to forget the device and then find it again. Turning the app off and restarting it. Even uninstalling the app and reinstalling it. Still getting the same error message. Advice? Thanks.
What options are available to replace the stock 4 ohm speaker that comes in the Code 50? I would like to upgrade to a Celetion or something similar. The stock speaker flutters at volume when using the heavy distorted/gain presets. Any recommedations?
I bought the Major III bluetooth headphones but I have a big problem when connecting them to my windows 10 computer. My sound is terrible when using the headset. If I deactivate the hands free telephony setting in the device's properties it switches to headphones and the sound is perfect but the microphone stops working.
Is there a way to fix this problem?
So my emberton turns on with no sound I can see all the lights and it connect But it doesn't play anything either I hope it's not water damage . I never put it in water I only touched it with wet hands Is there anyway I can hard reset it or something I couldn't find it on the internet
i’d Like to know which fuse is the proper one to replace on my Woburn speaker?
and by the way, what can cause this problem...?
(can it be affected by near electrical products or a bad/defective wall socket?)
I have looked for a definite answer to this and have not found one. I played my amp the other night with no problems, but last night as I turned on the amp it just died on me as soon as I turned the standby off. There was no noise, pops, crackles, fizzes. It just turned off. I checked the main fuse and it was blown. I have not had any issues with tubes and they have not shown any signs of wearing out. I made sure my amp was connected to the cab correctly (remember i have had this rig for 8 years) and that I had a speaker cable rather than a guitar cable. I found online there could be issues with impedence and what not. I took the back off of my cab and noticed that a positive lead on one of my v30's became disconnected. I thought, 'Could it be?" So I reconnected it and replaced the fuse and the amp worked as advertised. I played for an hour or so and no problems yet. Could it be that the discoonnected positive lead on one speaker caused it to blow a main fuse?
I'm trying to figure out how to use tap tempo on the footswitch with my marshall CODE amp.
As I understand it, I should be able to "stomp" in the tempo of my delay via the footswitch.
I have no idea how to do this though.
I see many other presets available form other people that are NOT Marshall assigned presets. Most of these have a different name like a user name assigned by their creator. How on earth does one name their own or edited preset so it can be assigned to the CODE and into the footswitch. I specifically DO NOT want to save the edited preset under the original name like American OD or Plexi. I would like my own name like - Heavy Classic 1 and Heavy Classic 2 or 3.
Why in the world would Marshall advertise right on their site for the code amps that you can record the code amp into your DAW, but not provide an asio driver? This is false advertising. Yes there is asio4all, it is not for a Marshall per se, and it doesn't work real well, it only records at 48khz, most daws will go to 96k, if not all the way to 192K? What gives Marshall? Plase put out an Asio driver for this otherwise great product. please. It can't be that hard if you can write the"code" for this amp. You are relly missing the boat here guys
As pointed out in these blogs the Code series locks up during editing and doesn't have an app for Mac users. These issues go back to al least June of this year. When is Marshall going address these issuse other than saying "a solution is coming soon?" I recently purchased a Code 50 but I am not going to hold on to it if Marshall is not going to support it.