Can someone explain how to use the 'looper' preset on a code série amp ?
i can't see any way to stop recording the loop.
Thanks a lot !
Hi, I have marshall code 25 and in the Pro Tools 10hd interface it does not appear.
Operating system Windows 10. Probe to connect to different USB ports and there is no solution. In the configuration of the control panel, the device is connected.
Greetings and many thanks
Sorry for my english
What I don't get is why the footswitch won't toggle all four areas -Pedal, modulation, Delay and Reverb. If set it up in switch mode to have my three toggle options for pedal, mod, delay then that overides the options in other preset banks so reverb is always left out as a toggled option... You could set this up for any three options at the expense of the fourth option. Am i missing something or is that a design flaw? I get that you might not need all four options per patch but on a separate patch you might have different requirements.
Bought a Code 25 few days ago. Plugged into my computer via usb, using garageband, and the funny thing happens. First, garageband does reconize the amp, however, no sound comes in or out. The volume on the channel of the amp won't work either.
Anyway, assuming it was a conflict between the amp and garageband, I tried it on reaper. Same problem, DAW reconizes the amp, no sound comes in or out.
Another test, the firmware. Did upgraded it, nothing happened again.
Any solution? I bought this amp exclusively to record via usb, and the main function for me isn't working. Dammit!
I was recently gifted a Marshall Code 25 amp and i go to power it on (mind you i followed all of the intructions listed in the manual) and got no results. I tried a few different outlets thinking maybe my wall outlet was the problem but still got no power.
Can someone explain how to write a setup in my Gateway library to the amp? No matter which box I check I seem to always overwrite my Gateway library setup with what is on the amp instead of the other way around.
I recently found out that my code 25 doesn't have a output that supports a jack. I've used a "Gibson Memory cable" before, and that was ok for my use. So my question is; which program should use when I connect my code amp to my computer? I'm not looking for an expensive and supergood program, just a program that works for my hobby playing :-) I hope this was understandable :-)
Hello Marshall. My Code 50 was connecting the other day and tonight I could not get it to connect. I am getting a message similar to this: Can only control an amp you are connected to. Something similar to this. Like my phone is connected to another Marshall Code. I only have one Code amp. My phone is connected to the amp in my bluethooth settings and I see the amp in the Gateway app. I have tried to forget the device and then find it again. Turning the app off and restarting it. Even uninstalling the app and reinstalling it. Still getting the same error message. Advice? Thanks.
which Pre Amp Model in an Code 50 amp comes closest to a Marshall Major 200W?
Hello, i have a lot of problems for connecting with the CODE 25 via a Samsung smartphone, a while ago it worked fine. But the last couple of days the bluetooth is killing me.
So i already tried what i read on this forum,
Re install Gateway, delete the Code 25 from the bluetooth and try again. When i put bleutooth on , i see the device on my smartphone, but it don't want to connect and on the screen of the CODE it says Bleutooth : VO............
It always say: Error, can not communicate with CODE VO.............
Can somebody help my please?
Can I turn the 100 presets off on the CODE amp? I don't want a High gain setting or a looper setting or all of these weird settings I kind of want to just make my own setting, if you will.
I want it to be like a regular amp atm. Is that possible?
I find my Code 25 amp too loud at practice levels (at least for my apartment) so I have to set the Master Volume between 0.1-0.9 and in that range the Master Volume varies greatly which makes almost impossible to adjust it at the same value twice.
It will be nice if the Master knob could also be set via software so it can be saved/stored and also displayed in the amp's front panel screen, since it is very common to move the amp from one room to another and accidentally change the Master setting without knowing at what level it was previously set.
Coud be possible to add this option in a future firmware/app update?
Thanks in advance!
Hello everybody I'm looking for Hotel California solo by Eagles tone thanks.
Dear Custom Service!
I am a happy user of Code 50.
The question is, relative to a normal high volume (master volume of 4 - 6, pre amp volume up 5 or more) of the amplifier resonates. What can it be? Normally this phenomenon, or a fault in the amplifier?
I look forward to your reply!
Does anyone know if you can connect Bluetooth headphones before I go buy a pair
Hello, I ve trouble with pairing my phone - lenovo s850 with Code 25 via bluetooth. I tried it many times, but my phone just cant find amp (bluetooth is on). I also tried another phones and devices with bluetooth but neither it could not find amp. Could it be broken amp or am I just doing something wrong? Thanks.
Hi there Marshall team,
I was wondering if you could help me with a problem that I am having between my Code 25 amplifier and the Gateway app. I am able to pair my android device and the amp via Bluetooth just fine but once I am in the Gateway app it doesn't detect my amp at all, even when I press "scan for amp" it just says no amp detected.
I think I should add that I have been able to connect it to my apple device without any problem at all.
It would be highly appreciated if you got back to me.
another question, are you guys going to make a cover for the code amps? just something that will protect it getting to and from rehearsal?
also, is there a setting on the for forum i can set to be alerted to an answer via email?
hi, how do i add a new preset on a code 50 without using one of the factory installed 100 presets?
Just got my Marshall CODE 25, and the iPhone 6 will not find the amp on the gateway app or on the regular bluetooth settings. Any reason why?