I have a DSL40C and bought a used 90012 model footswitch. Turns out that switch is meant for the newer DSL40CR. It is tip and ring with two sleeves for the two buttons, but the channel button does nothing. When plugged in the channel button on the amp no longer works, yet the footswitch button does not change the channel either.

If you pull the footswitch half way out it causes a channel change.

So the question is, does the amp have an issue or is this footswitch just not compatible? It's a two button, tip and ring with two sleeves so in my mind it should work...

Some internet sloothing leads me to a model P802 footswitch that was the one for the DSL40C amp but it seems like the same switch to me...

If I purcase the marshall code footswitch and plug it into the f/c input on my code 50 do I connect  the looper and the drum  machine into  plugged into the input on the left.  Would this stop the drums from getting the effects on the effects on the guitar

Is it possible to put a loop function on footswitch in a firmware update? I know I could buy a looper pedal, but I bought a digital modeller so I didn't have to go down that road.

looking for model of footswitch for JCM2000 DSL

I have a valvstate2000 head and footswitch but the footswitch did not come with the 15 pin d-sub cable. Is there a wire diagram or something that shows the pinout so I can make my own cable. I dont have alot of money so I cant afford to buy one. Thanks for your time.

I have a dsl20c with footswitch .   it’s started flicking  between channels on the amp without me touching it, at random times and very quickly - maybe 5 or 6 times in very quick succession.  I’m guessing it’s the foot switch - anyone else had this at all? 

Hi, I havent had any problems with my 2 Code100h that i run in stereo in my marshall 1960v cabs, in any way until now, besides the usual dirty pots.  I am trying to save the "in amp" tuner as a patch or an effect on a patch as the instructional video states. I do have the upgraded footswitch.  The only way ive found to acceas the tuner by footpedal is by turning one of the switch mode choices into the tuner, which makes every single patch have the tuner as the switch mode option. Kinda defeats the purpose. Is there any way to set the tuner as a patch by itself or as a switch mode option on just 1 patch and not all of them? 

I'm noticing a significant volume difference between the presets I have programmed on the footswitch in A2 & A3, is there a way to adjust this so the volume remains the same when switching between A2 & A3 ? 

Hi 

Would a footswitch PEDL-91003 work with a Valvestate V8080 ? 

Or it needs to be the PEDL-91004 ?

The reason I'm asking is because the PEDL-91003 can go from Clean / Crunch / OD1 / OD2 and the other just Channel / Reverb.

Please advise

I have a DSL100H, the 2012-2018 version (not the new R).

I am looking for a footswitch that allows more switching than the provided 2-button that came with the head. I have found the PEDL-91016, but it's specified for the DSL100HR, not the DSL100H.

The two-button footswitch supplied only allows going back and forth between Classic Gain and Ultra Gain. I'd like to be able to switch between Classic Gain Clean, Classic Gain Crunch, Ultra Gain Lead 1, and Ultra Gain Lead 2.

Has anyone tried the PEDL-91016 switch with the non R DSL100H model? Does it work? If not, is there a footswitch that allows switching as I've described above?

I have a DSL40C and bought a used 90012 model footswitch. Turns out that switch is meant for the newer DSL40CR. It is tip and ring with two sleeves for the two buttons, but the channel button does nothing. When plugged in the channel button on the amp no longer works, yet the footswitch button does not change the channel either.xvideos.onl/

If you pull the footswitch half way out it causes a channel change.xnxx.onl/

So the question is, does the amp have an issue or is this footswitch just not compatible? It's a two button, tip and ring with two sleeves so in my mind it should work...chaturbate.onl/

Some internet sloothing leads me to a model P802 footswitch that was the one for the DSL40C amp but it seems like the same switch to me...

My single channel footswitch for my DSL50 packed in at rehearsal last night - what replacement footswitches are compatible with this 2002 head and are any with an LED?

Hi please refer to this previous question to help explain the background to my question:  https://my.marshall.com/forum/question/1479/marshall-code-100---should-it-have-come-with-a-2-way-foot-switch?filterType=recent&myActivity=True

Basically I bought a Marshall code 100 (no it's not 100H or 100C just a plain 100). It was out of its box and on display but discounted by about $180 because it had a slight dent in the base. The store rep claimed it had not been used. I bought it due to the price but after a few months I realised it should have come with a 2 button footswitch. I then raised this fact with the store and they agreed to supply me with the one that should have come with it. It has been about 6 months since they promised me they would replace and every time I ring up they come up with some bullshit excuse like "oh our suppliers on the other side of the country claim it is not sold as a spare and they have to order it in and they are not receiving any new stock of this item until Feb". 

So Feb has come and gone so I am about to ring them and vent my frustrations on them. Then I thought maybe I could get the PEDL 91009 foot switch instead of the PEDL-91010, at a discounted price (perhaps to the value of the cheaper switch that should have come with it), as I am told it is much better.  As I have never had or even used a foot switch and am completely clueless on them I have a few questions:

Does the basic PEDL-91010 footswitch only allow you to switch to the next preset up or down on the preset list of 100 presets? Or can you jump from like preset number 4 to preset number 98? If it only allows you to switch to the next one up or down does the 91009 model allow you to switch between any two presets on my list? Does the 91009 model allow you to program more than 2 presets to switch between when playing a song? 

Finally, one responder to my other post mentioned that the Code 100 only comes with a basic 2 way footswitch and that the PEDL 91010 is an optional extra. But this contradicts what others were saying (eg that it is the PEDL 91010 footswitch that it comes with).

Anyway I am confused and need all this cleared up so I am fully armed when I next call the store.

So about a year ago I got a footswitch for my Code 50, and when i first got it, it started banking backwards on it's own. I was able to stop it...until now. The worst part of it, is when i go to use the amp's tuner, it immediately exits because it thinks the button is being pressed. When it began a few days ago, I was able to press the bank button to increase the bank and counteract the issue, but now the bank button stopped working. Maybe I pressed it too hard or too much or something. I cant remember how I fixed it last time or whether or not the bank button worked, but all I know is this time it might be done for good. If anyone knows of this issue or has had it happen to themselves, please let me know how I can fix it. I dont remember all the presets that were saved to it, but I can remember a couple. Please help!!!

I use the programmable footswitch with my CODE 100H. Has anyone experimented with a second footswitch to add another 30 patches? Is it possible to use 2 foot switches with an a/b box, or manually switch controller cable outputs, in this manner? Can you hear me Mr. Marshall?

I own a code 100h with the footswitch and I love this rig. I play through a 4x12 Celestion cab with gold standard vintage g12-75’s. It took a little bit of time to really become comfortable with the app and head interface, but it’s like riding a bike now. Thank you for this technology, Marshall, please don’t stop supporting us Kvlt CODE players!

Can I make a suggestion that you could profit from and would add to our Marshall experience and branding? Why not create virtual pedals and accessories that can be purchased and downloaded onto our CODE rigs?  

For example why not be able to purchase  “extra slots” and effects so we can run a wah and distortion pedal or run 2 delay pedals at once? I’m sure there are other itches that players could scratch this way? Maybe even add outside name brand pedals? You know, like that fluorescent green scream thing?  

Like I said, I love this rig, and it’s portability. If could ditch the separate wah and boost pedal I carry as part of my signal, I’d happily give you my money!

Hello, I got a code head and also the programable foot controller that I havent connected yet. My question is about the 30 programable presets. does this mean I can have total 130 presets or 70 factory presets and 30 custom presets.

i have a code 50 amp and i have a boss footcontroller Fc200. Is it possible to used this as the footcontroller instead of buying an new one? Already i have almost more pedals than there is room on the stage 😀

Hi,

I just recently bought a used Marshall DSL 40CR. It didn’t come with a footswitch. I wanted to know if there are compatible 1 button or 2 button foot switches other than the PEDL-90012 to change the channel. I know there are plenty of footswitches for the older DSL amps. Any help would be greatly appreciated. 

Thanks!

Hello, excuse my english. 

I just bought a new dsl40cr and i'm very happy but i am experiencing the known problems that this amplifier present when change the channel through the footswitch along with having the FXLoop ON.

In several forums like marshallforum.com there are quite a few people who have found the same fault, which leads to me think that is not a random failure in some amps but something more like a manufacturing defect. Some people have already contacte with the Marshall staff so i understand that Marshall is aware of the problem. The question is whether they are going to appeal to these units so that the authorized technical service of each country solves the problem (it seems that replacing a chip) or we Will have to be the users that we have to take charge of the management of this defect. (still under warranty)

Thank you very much and Best regards!