Questions
Showing results 121 to 140 of 166
0

votes

1

answer

1.1k

views

Hi,

My son has a Code 25 and the preset knob stopped working i had a look at it last night and tried the firmware update from the web site now it wont do anything and just says check USB. has anyone had this problem or have a solution.

thanks in advance

Alex

 

asked 26 Dec 2017 at 11:47 AM

piers lee
0

votes

1

answer

792

views

Hello using Android Tablett the Code25 wired with USB cable gives Info that IT IS not connected.

Also one question to my Gateway and my Marshall, are this two standalone Systems? how can my library from my Marshall be used in my Gateway. In my opinion all this ist a litte bit to confusing.

Thx.in advance

B.R.

 

asked 22 Dec 2017 at 05:08 PM

slaven lesic
0

votes

1

answer

2k

views

Hi, I’m having trouble getting sound from my Marshall Code 50 amp to record on Audacity.

I am running a new, working USB B cable from my Marshall Code 50 to a Dell Latitude 7280 running Windows 10. The computer is able to detect the amp USB input, and I am using the ‘CODE 50 digtal interface’ as my default recording device on both my soundcard and Audacity, however there is no sound output coming from the amp shown on Audacity , when I try to record (sound is produced from the amp’s speakers, however Audacity is not showing or recording any sound output). I am sure that the connection is working and the amp/ computer is not faulty, as I am able to download tone presets from the MyMarshall preset page. I have tried restarting both my laptop and amp multiple times, using different cables, using different USB ports, AND have the newest 1.41 CODE software, newest Audacity software, and newest version of my Intel HD sound drivers, but to no effect. I am on the verge of going insane from this as I have being trying for over 10 hours, and have had no results. This has worked for me previously, as I last recorded to Audacity with all the same settings about a month ago, however it’s simply not working anymore. I need to get it fixed ASAP, as I am due to record tomorrow, so any help would be greatly appreciated.

edited 06 Dec 2017 at 10:54 AM

J S-C

asked 06 Dec 2017 at 10:47 AM

J S-C
0

votes

3

answers

952

views

I timed it.

I’m not looking for trouble, im just looking for customer service.  I’ve got far better use for my time then sitting on this forum, trolling for answers that will never come—unless YOU, Marshall Amplification changes, which is highly unlikely. You guys are going to be getting a very brutally cold visit from me at the NAMM show!

After going through the entire Blootooth connection process again, which takes like anywhere from 5-10 minutes to get connected, I went to the MyMarshall.com website to download some of the interesting amp models which other users have taken their time to create (thank you to all who have fond this!)  When I download, it goes to my actual login like it’s supposed to, but how do I get it from the mobile device to the amp?  Your video isn’t clear, but do I have to have my device connected to the USB of the amp?  If so, when is the frigging purpose of having Bluetooth then?  If not, what am I doing wrong?

I await for your robotic response.  I’m sure I’ll still be right where I’m at after it comes!

asked 02 Dec 2017 at 01:15 AM

Tommy Naccarato (17)
0

votes

2

answers

852

views

bought my marshall code 50 last nov 2, 2017 .  When i connecy my Code50 to my computer , says USB on Code50 but nothing happens in my computer . not detecting or any. cannot find it on Device Manager . my usb mini cable is new btw.

asked 18 Nov 2017 at 05:23 PM

Charles Quilang
0

votes

1

answer

793

views

I have a Focusrite Scarlett Solo for home recording to my PC. With my previous amp I was running from the direct output to the sound card. With the Code can I go straight from the amp via the mini USB to the PC?

asked 15 Nov 2017 at 09:48 AM

Darryl Butt
0

votes

1

answer

706

views

Can I connect to my code 25 via USB to my RCA Voyager tablet cause I can't Bluetooth to work

 

asked 13 Nov 2017 at 01:52 PM

Robert Grisso
1

vote

2

answers

1.5k

views

I have a Code 25 and a windows 10 computer and I have tried everything and I can not get the amp to connect to my computer via USB. Does anyone know why? If anyone knows why please help!!! 

edited 25 Sep 2017 at 05:00 AM

Cohen Dedinas (1)

asked 25 Sep 2017 at 04:52 AM

Cohen Dedinas (1)
0

votes

1

answer

800

views

I cannot use the Gateway app and USB connection together. If my Windows 10 laptop is connect to the amp via USB while the Gateway app is running, it freezes the controls settings in the amp and the app. I still get sound, but I cannot change presets or edit presets on the amp or with the app with the USB connected. I have to disconnect the USB cable to be able to use the app, or the amp controls. If I want to use USB, I cannot use the app. If I want to use the app, I cannot use USB. Any ideas?

I have the latest firmware and latest version of the app. I have tried disconnecting and reconnecting bluetooth connection. I've tried restarting the computer. I've tried disconnectiong Bluetooth, shuting down the amp and the computer, and starting everthing up again. Nothing helps.

asked 08 Sep 2017 at 08:40 PM

John Pasnik
0

votes

1

answer

2.3k

views

When I try to hook my amp to my laptop, a box appears at the bottom of the screen that says code 50 not connected. I'm no computer genius and I'm sure I'm missing something simple but, how do I get it to connect? 

asked 28 Aug 2017 at 11:46 PM

david frizzell
0

votes

1

answer

2.8k

views

I hope someone can please help me here.

I have tried to use various methods in connecting my code 25 via USB to my windows 10 with no luck.

Can someone please tell me how I can do this because I just purchased the amp a week ago for primarly recording and I cannot get it to work.

It played my track out of the code speaker for a moment but thats all. I continue to get errors from windows saying that the USB is not recognized,

I have ASIO drivers installed and use reaper as a recording interface.

 

Please help! I would be much appreaciative !!!

John

edited 23 Jul 2017 at 06:13 PM

John Ventura

asked 23 Jul 2017 at 06:11 PM

John Ventura
0

votes

1

answer

2.7k

views

I just want to check with fellow CODE users if they are facing the same issues that I am dealing with.

Biggest (and most annoying) issue is, it's a matter of luck connecting the CODE through USB. 2 times out of 10 my pc recognizes the amp the first time I plug it in. Mostly it gives an error that device is not connected properly or not recognized by windows. So I end up unplugging and plugging again until (if ever) it's been recognized. (Using windows 8.1 btw) Then suddenly in the middle of a recording session my DAW starts to drag like if I am running on a PC Pentium 600.  (It's running on a 3000$ alienware) This is a sign that somehow CODE get disconnected itself.  Now you have only option left: Restart the PC and start all over again.

 So far I have checked with different USB cables, and I am using the shortest ones as possible as I can. (less than 80 cm.) I can't check with another pc since I don't have another one, but I am running Yamaha THR-10 smoothly, without any problems at all!

So I don't believe that there's an issue with my pc. And speaking of THR, why the hell CODE doesn't have it's dedicated USB drivers. I am kind of sure that the issue I am facing is all about the ASIO drivers that we are left with as an only option.

 Second issue is, maybe only 1 out of 20 times I am able to get any presets from web site. Even if it looks like CODE is connected in the Device Manager, and the Chrome (or Opera) says MIDI is connected, I can't send any presets to the amp. After a few tries, this ends up with web browsers got frozen and only option is again: restart your pc!

I really would like to hear from people who are facing similar issues and how they could get over with it. (if they ever could)

And hopefully the only answer I receive from Marshall team is not going to be: "Thanks for your feedback, we will pass this to our technical team"

 Regards,

edited 07 Jun 2017 at 07:36 PM

Gurhan Ozkaya (1)

asked 06 Jun 2017 at 07:57 PM

Gurhan Ozkaya (1)
0

votes

1

answer

1.2k

views

The usb driver of the code amp is loaded as it is showing  device manager. But when I switch to this in cubase I cant allocate input busses.

asked 05 Jun 2017 at 06:49 PM

Glyn Bycroft (4)
0

votes

0

answers

897

views

Hi Guys,

I was wondering recently whether it's possible to connect the CODE Amp to Garage Band for the iPad.

Can you use USB or iRig?

Thanks, guys. :)

asked 23 May 2017 at 07:49 AM

Louis Kirkwood
3

votes

2

answers

4.4k

views

Just bought a Code 50...enjoying it but little surprised not to find the USB cable you need to connect the amp to your computer in the box, but hey ho. What type of cable do I need and where can I buy one?

asked 20 May 2017 at 05:56 PM

Robin Ashford (3)
1

vote

1

answer

1.1k

views

The lag time in the release of this footswitch is rediculous.  Why would you promise something that you can't / don't deliver on?    IF the Bluetooth/iphone Gateway App were usable/seemless, the physical footswitch might not be necessary.  IF the parameters of the amp (including up/down patches) were avaiable via the USB port to a Computer program/app, the physical footswich might not be necssary.  IF there weren't Bluetooth and other software bugs, then the physical footswitch might not be necessary.  Unfortunately, IT IS necessary just to use the Code 25/50 remotely as was promised in it's advertising when purchased. Mine is still under Warranty by Marshall.   It is not performing as advertised.  Please send footswitch, or send me a RMA (Return Merchandise Authorization) for the whole AMP  - you pay return shipping...   

asked 18 May 2017 at 01:58 AM

S Fisher (6)
0

votes

2

answers

2.2k

views

I bought a CODE 25 amp and I can’t connect with any computer, I have tried with 2 different cabes and some differente OS: Windows 7, 10 and macSierra. I was thinking to update the firmware but, I can do that because the amp is unable to be recoginized by a computer!

It`s really frustrating!

asked 17 May 2017 at 10:16 PM

Rodrigo Prestes Machado
2

votes

0

answers

2.2k

views

Mi Code 25 ha dejado de funcionar con mi PC para grabar. Cuando lo conecto por USB ya no lo detecta (error 43 ) interface no reconocido. No se porque ahora no lo reconoce. 

Hay alguna forma de solucionar? 

asked 13 May 2017 at 02:25 PM

Marcos Osorno (2)
1

vote

1

answer

1.6k

views

Promises, promises ... "we'll fix it soon";  " bluetooth issues will be addressed in future firmware updates";  " USB recording issues will be looked into"; AND, a 2-way footswitch will be available for Code 25/50 users when Code 100 is released.  Am I alone in my disappointment for Marshall's seemingly apathetic (non) responses to purchasers of their "not ready for prime time" digital products?!?!?!   I really wanted a Marshall Amp after 45 years as a Fender user.  My mistake.  I should have known better.  Useless, unsupported, glitched, buggy, unreliable, etc., etc., etc.    What say you Marshall in an attempt to save any reputation you thought you had?!?!?!?

asked 05 Apr 2017 at 06:08 AM

S Fisher (6)
0

votes

0

answers

1.5k

views

Hello everyone,

I just recently got a nice Code 25. And I am trying to record the sound through USB with Sonar Producer 8 in windows 10 OS. However, Sonar wont recognize Code. There are 3 options for audio devices in Sonar, which is MME, WDM KS and ASIO. When it switched to ASIO, Code is not shown at all, but when switched to either MME or WDM, Sonar tells me  error in the Code USB driver with 2 options, "disabled" or "use anyway". And if I choose use anyway, Code will be shown but can not be selected as input for audio channel.

Checked the support from Sonar, Marshall Code has not  listed in their support/download site.

Here is the address : www.cakewalk.com/support/hardwaresetup.

Anybody has solution for this?

Note : No problem at all for playback from windows to Code. Only problem for recording.

 

Any help or opinion will be appreciated.

Javen

asked 26 Mar 2017 at 01:01 PM

Javen Roth (13)
Showing results 121 to 140 of 166
Loading - please wait...