Good morning! I bought a Marshall 2555X Silver Jubilee amplifiers! and a Marshall 2551BV Silver Jubilee speaker cabinet. I have tried to register the speaker cabinet! but it does not work. It might just be possible to register amplifiers?
Sincerely, Mikael in Sweden.
I have read that JVM can handle 2 cabinets at the same time.
1. connect 2x12 ( 2 -> 16ohm speakers in parallel ) into 2x16ohm input ( 8ohms )
2.connect 2x12(2->8ohm speakers in parellel ) into 2x8ohm input ( 4ohms )
Both connected at the same time. it looks like JMV OT is designed to handle it. I would like to confirm if that is save.
Hi, im jst new on using Marshall equipments and having confused regarding on how to hook up these things. Can you please give me possible ideas on how to connect my DSL 100H to 2 sets of 1922 cabinet speakers? Impedances are confusing.
Seems that the JCM-1C 50th anniversary is not in the database for cabinet registration.
SN M-2012-43-0525-1 purchased on April 5, 2014
1) CODE 50 occasionally locks up when changing speaker cabinets (no sound). Must reboot.
2) sound gets progressively "muddy" when tweaking controls. Must reboot to get the sound back.
3) Cannot update: CODE connects to PC, but app generates error saying it cannot get information from the CODE.
Recently, I have purchased thru Andertons Music U.K, for a stack of
ASTORIA Dual head and matchinf 1x12 cabinet.
M-2015-52-0008-1-112 and M-2015-43-0205-0 respective S/N
However, in the Registration column,you have not provided the amp model yet.
Slow hand did you go since almost more than year has passed away from the launching
of the amplfier ASTORIA series and matching cabintes. please clarify.
I was wondering if you could recommend any extension Marshall cabinet for my Class 5 combo amp.
As per the link , https://marshallamps.com/support/faq/impedance/ ... where can I find that information on your website?
Most of our combos have an extension cabinet designed to match its size and sound. Our website has full details of which combos and extension cabinets work together and the user manuals, available to download from the support section, give full explanations on how to connect them. We recommend going to your local Marshall Dealer so you can test out the combos and cabinets to see which one suits you the best.
WHERE CAN I GET A REPLACEMENT CABINET FOR MY DAMAGED MG15DFX-H ? CHARLIE
I'm a new owner of JVM410hjs, I just found out that the serial fx loop got problem
I have plugged in an effect chain into the fx loop, I have enabled the fx loop on the front panel,
what my question is that if I haven't plugged in the power supply for the effect chain, i.e. the effect chain in the fx loop is dead as there are buffered bypass pedals inside. The fx loop is serial loop thus at this situation, the amp must be dead silent. But the reality is I still hear a low volume of my playing through the cabinet, this bleed through is normally happened in parallel loop, but why my hjs serial loop also do that? Is that normal as the circuit designed is like this or my jvm is defected?
Top Slant Cab Ser No 35079
Bottom Straight Cab Stock # 1935b, Ser No 26753
I've 2 old marshall 1912 speaker cabinets and 2 questions:
1) how can I remove the front panel for cleaning the grid?
2) there's a dedicated cover for the 1912 cabinets?
Thanks a lot
Using my C5 combo as a head to the C110 cabinet, is there a way to have outputs on both the combo and cabinet?
I have a marshall JVM 410 combo, and connected a extension cab JVMC 212,16 omh,I get an amazingly god sound.
Can I connect two JVMC 212 cabinet without damage the amp in any way? If not,is it a another way to connect one more cab?
Maybe I can use two 8 ohm cab?
I maybe ask silly no, but hope it is possible? :-)
Thanks for reply.
Greetings from Norway.
I am wanting to purchase the Marshall DSL 40c amp.
Would I be able to use my MG4x12 extention cabinet with it?
I'm looking for a Marshall Cabinet for my newly aquired 3203 - It origianlly paired with a 4x10 but am wondering how it will sound with a 2X12 and also - will just any footswitch do? I think the answer on that last one is yes but I am not sure.
Hello, I purchased the DSL40C and MX212 Cabinet. I know the Speaker in the combo is 16-ohms. I also know the speakers in the MX212 are wired for 8-ohms. I know if I use the cabinet, I can't use the speaker in the combo together. My question is, has anybody ever put an 8-ohm speaker in the combo? I am thinking that two 8-ohm loads would give me a 3x12 config for extra beef! Would this work, and would the amp still sound just as good if I used it alone (to take to jam sessions) on the 8-ohm output? Thanks
Hello, I know this has been covered here and I have read all of the messages, but I would like some newer feedback regarding my newly purchased DSL40C implimented with a Line 6 POD 2.0.
I realize you can't shut off amp modeling and that to achieve the least amount of colorization, and preserve my Marshall tone as much as possible, I should set the POD 2.0 to Tube Preamp, and EQs to 12 o-clock, which shuts off Cabinet Simulation. I want to use the POD 2.0 because it has a bunch of presets I use, which I will modify and it gives me multi effects with a Pedal.
How should I route this, given the effects send on the DSL40C is probably line level, and has no attenuator. The POD 2.0 has instrument in and I presume Instrument out. I know it will run -10 and +4 when using TRS. I will say I don't see any documentation on the DSL40C loop.
This is my first Marshall setup and need advice from you gurus.
Any and all advice is appreciated.
Thanks so much!