I've had a PEDL-91016 footswitch on backorder since August. Can someone provide me the schematic to switch the master volumes? That's all I really want from the switch anyhow.
I'm to the point where this feature was the only reason I bought the amp, and I've not been able to get the footswitch to use it. I do love the tone, but I'm kinda done waiting on it now that I hear it'll be April. This is really my first Marshall purchase, I'm not sure I'll purchase a new product again at this point.
Totally lost with all the footswitch 🤪
I can’t find a pdl-90012 in Canada, can I use thé pdl-91003 with my dsl5cr ?
thanks
I have a Marshall DSL 100-watt head purchased in 2016 (so not the newest version), whose channel switching and onboard reverb I would like to operate with a Fractal Audio FX8's relay function. The manual for the FX8 clearly states that its relay function is only to be used on amps with "short-to-sleeve" switching. My questions are, is the Marshall DSL100 head built with short-to-sleeve channel switching? And also, do the channel switching and reverb on/off functions on the amp behave in a latching manner (i.e. the effect remains on as long as the switch is engaged) or an auto-off manner (i.e. the effect is triggered by a momentary connection)?
Thank you!
Hallo,
can you tell me please if footswitch models here below described can be used for Marshall DSL40C ?
thanks
Hallo,
I'm going to buy a second hand Marshall DSL40C without footswitch. I realized that it is not too easy to find on the market an original footswitch (PEDL-00009). could you please tell me a list of compatible footswitch which can replace PEDL-00009 in case I don't find it?
thank you
Hi there. I am not a native but I hope you'll be able to get me right.I have been using Dsl 15c for about 2 years and all of a sudden the amp stoped producing any sound. All controls freeze, footswitch is non responsive. Led’s and tubes are still lit. No pedals in line. I turn power switch off then on and hear sound like a relay click in the background and then sound immediately cuts out. My tech told me the problem is 99% in the microcontroller AT2313 because inside all fuses are still intact. He was able to read the code and fix errors that cut the sound out. However, it did not help because some of microcontroller ports were damaged(most likely it was a factory defect). Is it possible to re-record the code to new microcontroller or maybe there are some other options to consider?
Thanx.
I have a DSL100H, and would like to replace the footswitch with one that has LED's so I can tell what setting I am on with my back to the amp. Can I use a standard externally powered 2 button switch with a TRS cable?
I bought the footswitch and the Marshall Code 50 a few months ago. Both working fine until doing a gig last evening, I hooked up my footswitch to the code 50 with the lead that came with it. No lights showed up, but the amp working fine I tried changing with a different lead, and the footswitch still no lights. The footswitch won’t work. Anyone out there has a similar issue please. Any suggestion please? Thanks in advance
Is there any reason why the PEDL 91016 footswitch is only available at one location and that location is in the UK? Is the footswitch available anywhere in the U.S. or will it be?
Hey Marshall Forum!
About a year ago I bought my first ever Marshall amplifier; the Silver Jubilee 100W head (with 4x12 cab).
Since I use it mostly at home, I haven't cranked the volume all that much. But when I do, I notice a loud humming noise.
Today I turned the amp on, without having the guitar cable attached to it, cranked up the Master volume (with 0 gain!) and it hummed like crazy.
What could be the source of the humming?? And more importantly, how can I get rid of this awful humming?
The only cables that were attached were the footswitch, FX in/out and the power cable.
Hey guys
I'm trying to figure out how to use tap tempo on the footswitch with my marshall CODE amp.
As I understand it, I should be able to "stomp" in the tempo of my delay via the footswitch.
I have no idea how to do this though.
Please help
Thanks
Gerbrand
Hello,
I'm about to buy DSL20CR, I'd like to verify that my Line6 helix can switch channels and enable / disable fx loop of that amp.
In Helix manual is said: "IMPORTANT! Connect EXT AMP 1/2 only to amplifiers that utilize "short-to-sleeve" footswitch inputs. Connecting to any other sort of input could cause permanent damage to both your amp and Helix! If you're not sure if your amp has short-to-sleeve inputs, contact the manufacturer."
Is this ok with DSL20CR?
br,
Martti
I broke out my old mg 30dfx and bought the PEDL-90008 for it but nothing happens when I plug it in. Is that the correct footswitch for my amp?
Does the programmable footswitch have tap delay capabilities? If not, how can I achieve that?
I have a Code 100 and want to be able to add auto wah on top of a preset with another (Overdrive) pre-fx set and use the (4 way) footswitch to switch it in and out - can this be done ?
I just got a JVM 205H ,used ,, but the footswitch on 1 &2 stay blue and I cant seem to switch to the green yellow or red modes . I have the manual but I cant seem to find anything about a blue led on the footswitch. I tried to do the reset on both the head and the footswitch but the blue light and the problem is still there . anyone whats up with that?
I just got a JVM 205H ,used ,, but the footswitch on 1 &2 stay blue and I cant seem to switch to the green yellow or red modes . I have the manual but I cant seem to find anything about a blue led on the footswitch. I tried to do the reset on both the head and the footswitch but the blue light and the problem is still there . anyone whats up with that?
When I hold down footswitch 1 to access the turning on/off of my compressor it doesn`t work anymore. It does this in all banks and patches yet worked perfectly previously. I`ve only had it a week so is it faulty or can I resolve this please?
Due to an older brother, I began really listening to The Marshall Sound as early as 1972. Then he gave me my first guitar in 1976. I wouldn't put it down and learned open chords, power chords, scales, etc. Of course, seeing and hearing live from shows from KISS in 1977, and Ozzy with Randy Rhoades, through Def Leppard and many many others, but it was AC/DC's Back In Black, Hells Bells that did it for me. I found a full, used stack around 1984, and I was lucky the lady dealt with me, gave me a break and let me pay it out. Since I have owned different amps (Fender Vibroverb Custom with the Diaz mods, Peavey, etc), but I have also owned the 150W AVT, and even the cheaper, solid state MDFX 100W. These never came close to my first.
I JUST purchased a DSL100HR, I guess the new, revamped model. I love all the features, however, the footswitch reminds me of the MDFX or HDFX that has two buttons only on it. When I went to Marshall's main site, I found that the MIDI port is for a fantastic footswitch, which would allow me to do many, many things, without having to stop and turn knobs in the middle of a song.
Where can I purchase one of these and for how much? I live in Texas, in the United States. I had to sell the no longer in production Vibroverb Custom with the Cesar Diaz mods, which was my Pride and Joy (I met Stevie Ray Vaughan after a show on October 8, 1983, in South Dallas, and we began talking about Hendrix, he literally had to be pulled from me).
Please let me know where, how much, and how I can get one of these, please.
A Loyal Marshall Amplification Fan & Player Since 1984
Thank you,
Mark a.ka. TexasUSAFVet@Outlook.com
Hi guys i have a Code 50 Amp and footswitch. i have recently started to having a problem. when i am on a patch and hold in the Selector on the Switch for instance if i am in Bank B3 and hold down the B3 switch, you enter a mode which you switch off FX, Delay and reverb. i have notiched that when i go into any bank like that and want to go back out to choose another patch my amp buttons and knobs & footswitch is non responsive and i have to switch the amp on and off for it to respond again, this is very anyoing. any feedback on what the problem might be