Wie kann ich den code 25 auf Werkseinstellung einstellen ?   Vielen Dank 

I just received a Marshall Code 25 as a gift and I am new to guitar playing and using an amp. So I have 2 questions actually.

1. In the User Presets section, what does the X over the amp (code not available) exactly mean?

2. I managed to connect the bluetooth on my iphone with the amp, and it works fine, but everytime I turn my amp and the app on my phone on, my amp doesn't show in the amp. So I end up having to sync the bluetooth every single time I turn it on, let it search for my amp, and then I can get started. Is there some reason why my amp doesn't stay in the app?

 Hello,

My nephew recieved a Stanmore II bluetooth speaker for Christmas and he's having problems with adjusting volume with his phone on bluetooth. Most of the time, he will turn the volume up or down on his phone, but the speaker volume doesnt change. Sometimes though, it does work. Late at night he will put a song on and have to run across the room to turn the speaker down because it will wake everyone up and the phone adjustment won't work. Any help is appreciated. Thank you. 

Hey

So I have an Origin 20H and was wondering if I could replace the EL34s with Kt77s and weather or not that would cause any problems. 

Ive heard they get more headroom and slightly better bass response 

Thank you 

This is killing me! total dealbreaker. If I can't find a solution I'll return this speaker which I love everything else about it.

It goes to auto-standby if it's unused for 20 mins regardless of bluetooth use or sound coming from RCA jack. But whenever I play something next time, I have to touch the knobs to wake it up manually. I put the speaker in my bookshelf which my plan is to not need to touch it in every use.

I want it to not go stanby mode ever. Is it possible? I couldn't find any answer in the manual, in the forum or in any other place. Sent a support inquiry as well, but I'm curious if anyone else is having same issue.

While my Minor 2 is connected to Apple Music on my iPhone 11 Pro, the music stops after a few seconds. If I start the music again the music stops after a few seconds.

This only happens with my Minor 2. It doesn't happen with my Major 3 BT.

What could be the problem?

Hello, I'd also like to register my new amp and actiavate the warranty etc.. I just got it over the holidays of 2019/20. 

Thanks

Knight

Hello people. 

have a little problem.

At home, to write songs, I play with an old marshall valvestate 80watts (8080)

I'm looking for an amp to replace it.

The thing, and don't laugh please, is that I love the sound of the lead channel. If it is set properly, it sounds really good.

The distortion is really very sharp.

In any case, with my guitar it works wonders.

So I'm looking for a more current amp that can replace it.

I just need to be able to have sharp and precise sounds ... Zakk wylde way in Ozzy.

I've had my dsl 401 for about 12 years. In the United States. From the beginning, it would lose power, go silent, but then come back. Now, it has gone completely silent, won't come back, and I can't find a certified Marshall repair listed anywhere in the United States. All my searches, including on Marshall's own website, state it is for UK customers only. This issue is common with this amp. Can you point me in the right direction? I am not an engineer.

Hi - 

  I wanted to change the power tube in my DSL1HR Head.  Will it need Re Biasing ? or I can go ahead and just swap the tube and no problems it is good to go. 

Thank You

my goal is to run my TC MOJO pedal through it clean, anybody use pedals through the marshall code series?

I want to be able to use an overdrive pedal, and is that best accomplished with a clean tone/no presets?

Trying to register my DSL40CR. anyone i can email for marshall to just send the info to and register it. website page is down, and im not sure if i have ther serial number on it right. 

i have try all the suggest from the support, re-install, re-boot, everything but nothing happens...someone has have same problems? and what have you done?

Tks a lot

Arturo

I have received the following error on my iPad after an update of the IOS:

context 3D not available ! Possible reasons : wrong rendermode or missing device support 

I have uninstalled and reinstalled the app, disconnected the Bluetooth and reconnected, everything I can think of and nothing has gotten rid of the error message. Very frustrated. Thoughts?

Greg

I am looking for a maunal for my JCM 2000 DFSI.  Where can I download or order one?

Thank you in advance for your assistance.

Hi. I just bought Marshall 1959 HW and it's constantly humming when it's on. I have Wizard Modern Classic Amp and ENGL Powerball 2 and they don't hum like that when ON. Is it normal? Also when I strum a chord very loud mechanical noise going out of the back. Check the video I shot to hear how both issues sound:

Hi I have a Marshall Code 100 and I often download patches of my fav artists from Marshallcode.tools. Firstly, let's get down to basics. Are "patches" the same as "presets"? It's really confusing as marshallcode.tools calls them patches but on this my.marshall site they are called "presets" but as far as I can see they are the same thing.

As there is only room for 100 presets on my amp, whenever I download a new patch from marshallcode.tools to my amp, I always make sure to copy the original preset that came with the amp that I am replacing, to my library as a backup, in case I want to reload them back onto the amp. When I click on the settings icon next to a preset in my gateway, it comes up with the option to "copy to library". It seems to take about 3 or 4 days for a preset to transfer to my library. Is "My Library" cloud based storage? 3 or 4 days seems like a long time for a preset, which are small files as far as I am aware, to copy to my library. I get concerned sometimes that it isn't copying over when I check the next day or even 2 days after copying it and I do not see it in my library, because immediately after I click copy to library, I can see it in my library, but it is black in background colour, rather than the olive green of all the other presets in my library. And  then to check the next day and not see it anywhere in my library, regardless of colour, seems strange, like it has disappeared (but maybe it is just in transit?). They all eventually seem to arrive there, just seems strange that I cannot see it in my library in black background to indicate it is still uploading to my library cloud. So I am wondering if it usually takes a number of days to actually appear in my library and why it disappears from My Library during those few days of uploading?

I've 3 Marshall AMP 

1. AFD 100 Slash signature with Footswitch Model : PEDL-00053 (2 channel footswitch)

2. SL 5 Combo, Slash signature with Footswitch Model : PEDL-00009 (2 channel footswitch)

3. Marshall 2555X Silver Jubilee Re-Issue with Footswitch Model : PEDL-90003 (1 channel footswitch)

My plan is to mount my AFD 100 , Footswitch Model : PEDL-00053 to pedal board and use this Footswitch  as main Footswitch to all 3 amp

Could you please confirm  Marshall AFD 100 Footswitch Model : PEDL-00053 compatible with PEDL-00009 & PEDL-90003 ?  

or any concern If I use PEDL-00053 for all 3 amp ?

Thank you very much for your information.

I bought a used JVM1C from GC and it it didn't come with a footswitch. They gave me a single button Blackstar FS. It doesn't work. I think this amp uses a single button FS to switch channels. I can't believe I can't find anything on the internet to identify the replacement switch.