Just got this Amp and I not sure how to save a downloaded pre set. I can download but not sure how to save it. And I'm not sure what the Amp/phone icons are for in the lower left on the phone app. Can Somebody help a brother out???? Thanks you crazy animals !!!!!
There's a noticeable bit of digital noise/fizz in the output. Fiddling with gain, volume, presence and resonance settings seems to help a bit. Upping the gate settings only cuts it out when you're not playing, otherwise it pops back in as soon as you start, only now with sustain and response issues associated with setting the threshold too high.
I've seen this issue noted on other boards, and the problem seems to be rooted in the signal processor. Does Marshall have a fix in the works?
On Dec, 2014 I bought a Marshall MG50CFX. During the last period, the amplifier became unstable, showing a strange issue: after 10-15 minutes, randomically the sound was crippling and then vanishing, with the volume control unactive. Only a complete power switch off-on resolve the issue for a while.
Any suggestions ? Thanks in advance. Max (Rome-Italy)
Just bought a Code 50...enjoying it but little surprised not to find the USB cable you need to connect the amp to your computer in the box, but hey ho. What type of cable do I need and where can I buy one?
I try connect Marshall Acton to my PC with Bluetooth 2.0, but require PIN code. 0000 or 1111 not work.
What is the pin on this speaker?
I have recently opend up the DSL15H I have bought second hand and, surprise, a resistor has fallen off from somewhere in the head, down on the floor.
The resistor is a 5K6, 1/2 Watt resistor, and it looks like it has been snipped clean off from the board, as the legs are about 2 mm long, and bent. I have checked the schematics, and the only two 5K6 resistors I have found are R62 and R63, in the power amp section. Both of these are sitting firmly in place on the PCB.
Can you please advise if there is another 5K6 resistor in the circuit I have missed, and need to check? The head has worked OK so far and as far as I can tell, and I have not dared power it up since I found that resistor ; I will probably not dare until I hear from you guys.
I'm a new member of this interesting forum.
I use a preamp JMP 1 through a Power Amp 9100. Vintage now, yes.
Are there users of this equipment, in order to exchange tips and comments?
In the past, occasionally, my Code50 would cause upper register tones to sound out of tune, quavering, in fact. If I reinstalled the firmware, the amp functioned properly. Now, no matter what setings or what guitar I use, the problem persists. I have reset the presets and reinstalled the firmware several times.
The amp has not been abused or subjected to inappropriate use. In home studio only.
What can you tell me?
The lag time in the release of this footswitch is rediculous. Why would you promise something that you can't / don't deliver on? IF the Bluetooth/iphone Gateway App were usable/seemless, the physical footswitch might not be necessary. IF the parameters of the amp (including up/down patches) were avaiable via the USB port to a Computer program/app, the physical footswich might not be necssary. IF there weren't Bluetooth and other software bugs, then the physical footswitch might not be necessary. Unfortunately, IT IS necessary just to use the Code 25/50 remotely as was promised in it's advertising when purchased. Mine is still under Warranty by Marshall. It is not performing as advertised. Please send footswitch, or send me a RMA (Return Merchandise Authorization) for the whole AMP - you pay return shipping...
I bought a CODE 25 amp and I can’t connect with any computer, I have tried with 2 different cabes and some differente OS: Windows 7, 10 and macSierra. I was thinking to update the firmware but, I can do that because the amp is unable to be recoginized by a computer!
It`s really frustrating!
i havent done any update yet to my code 25 and the new updated app works fine with my amp straight out of the box....bit loathed to do so with all the issues many others seem to be having...so just wondering just what update the firmware is up to...
whilst you are there MR Marshall, for others interested....code 50 and code 100 firmware update number as well please...
i cant find that info anywhere
Hello! I recently picked up an odd little Marshall bass cab and I wanted to learn more about it. The people I bought it from received it in a storage container auction and it appears old and well traveled. It's a 2x8 bass cab. Tried searching for anything like it but I couldn't find anything on it. Super weird. Sounds really cool! Any info would be appreciated, thanks!
i have a Marshall MG30 amp 12 months old and sometimes while playing the two channel light just glow orange and the amp freezes untill turned off,any ideas
hello friends of Marshall.
Rory Gallagher has played Marshall amplifliers in recent years, is it possible to make an Rory Gallagher signature JMP combo amp.
Thank you Marshall.
Mi Code 25 ha dejado de funcionar con mi PC para grabar. Cuando lo conecto por USB ya no lo detecta (error 43 ) interface no reconocido. No se porque ahora no lo reconoce.
Hay alguna forma de solucionar?
I see many other presets available form other people that are NOT Marshall assigned presets. Most of these have a different name like a user name assigned by their creator. How on earth does one name their own or edited preset so it can be assigned to the CODE and into the footswitch. I specifically DO NOT want to save the edited preset under the original name like American OD or Plexi. I would like my own name like - Heavy Classic 1 and Heavy Classic 2 or 3.
How to use the tuner footswitch 91009?
Please videos, explanatory manuals in different languages(PORTUGUESE). Tips, secrets.
Everything that can be used for the good use of the equipment.
I have an Iphone 7, bluetooth is on and it recognizes the amp but no matter what I try, it will not let me start up. It will not connect. The only message I get is make sure you are in range? I would love to use the phone as the amp screen is small and hard to read.
I've Sony Xperia Z3 Compact with Marshallow.
Gateway version is 1.4.1.
Marshall Code 25 with newest firmware.
Playback doesn't work, it crashes when I want to select song to play.
Could you help please?
Can anyone tell me if there has been a firmware update within the last month? As there doesn't seem to be any notification anyware of new updates, and connecting my laptop to the amp every few weeks to find out is a bind when you just want to rock!