I recently added the tuner to my footswitch (preset), but now I want to undo it. I'd rather have the first bank available for a pre fx- preset. Doe anybody know how to undo it, ig by resetting the footswitch to factory settings?
thanks
Hi
when will we get a new update to improve the Bluetooth Connection ?
Hi everyone,
I've a very similar question to one that has already been asked.
Is it safe to use the headphone/line out without any speakers connected to the rear on a MG100HDFX head?
Also, when I do use the speakers, do I have to use both speaker outputs at the rear or is using just one ok?
One more thing, is it safe to use my faulty G80R CD as a speaker cab with my MG1000HDFX, I'll be using nothing like full power, just having fun in my room?
Thank you in advance,
Voxathon.
Hello,
I have a new DSL20CR. When I use emulated out, the signal is only present when the amp is on standby. When I switch the amp to low or high mode, there is no longer any signal on the emulated out. Is that correct?
If I connect my DSL40CR to an external speaker cabinet should I disconnect the internal speaker ?
I have a CODE 100h + CODE412 and I love them !!!!
I use a pedal board with different effects and was thinking of adding a looper / switcher (Boss ES-5 or MUSICOM LAB EFX LE).
I would like to know if with the looper I have listed I can change presets to CODE100H via midi. Do I need a USB / MIDI interface? Thanks
HI ,
I`m trying to use my BOSS Gt-100 as a Midi controller to change channels on my JHS410H.
It works...but sometimes amplifier doesn`t change a channel.
Looks that it`s amp fault, because gt100 sends PC messages on each press.
I think that JVM gets sometimes confused because all messages out of GT100 comes in formula: 2xCC+1xPC.
Could you advice how to deal with it? Is there any option to change a firmware on JVM midi module to make communication more realiable?
Thanks.
Kris
I just received a Marshall Code 25 as a gift and I am new to guitar playing and using an amp. So I have 2 questions actually.
1. In the User Presets section, what does the X over the amp (code not available) exactly mean?
2. I managed to connect the bluetooth on my iphone with the amp, and it works fine, but everytime I turn my amp and the app on my phone on, my amp doesn't show in the amp. So I end up having to sync the bluetooth every single time I turn it on, let it search for my amp, and then I can get started. Is there some reason why my amp doesn't stay in the app?
Hi, I live in Chile and purchased a mini jubilee head from USA. The amp is configured for 110 volts and the domestic voltage here is 220 volts. I’m going to buy an external transformer. What is the optimal wattage rating I should be using for this amp?
Thanks in advance,
Carlos
hey guys, not so much a question but more of an info statement, since doing latest update to iphone 6 os, gateway app now works perfectly, connects first time everytime, stays connected and has at least 4 feet connectivety. havent tried further. you can even close it to answer a call, reopen it it and it goesright back to where you were,, so cool now. highly recommend doing update if you havent already
Hi, mi Stanmore is working great with my mobile device through bluetooth (once I downloaded the app) is there any chance to connect it to my macbook (of course I mean bluetooth too)? I cannot do it.
Thanks
Hello,
Recently I bougth a code 50.
When I want to stream music with bluetooth to the code, you can hear all kind of interruptions. The further the distance, the worse. But even with the laptop at a distance of 1 meter, you can haven interuptions.
I tried to solve the problem by upgrading to the latest firmware, but this has no effect.
When I am treaming to an other bluetooth device with the same laptop, I don't have any problems even at a distance of 8 meter. So the problem must be in the code.
Does anyone has the same problem?
What to do, or is this a defect?
Thx.
how do i find the registration card online ?
Hi. I recently purchased a DSL40 CR and am wanting the 6 button footswitch so I can use all of the amps capabilities. Is the PEDL 91016 available yet in the US? My local Marshall dealer says that these have been back ordered for months. Currently they are telling me there is a 2 to 3 week shipment delay. What is the availability of these?
I picked up a Code 50 last week so far I love it and the possibilities it offers. Only issue I have had is when the Bluetooth is connected to my phone (Samsung Galaxy S7 Edge) if I get the phone too close to the amp I get a weird digital rattling sound coming from the amp. I have not tried to see if same issue happens with my Android tablet though. Has anyone one else had this problem or know the cause?
Is it possible that the firmware version that came with amps can be released as an update in order to reset the amp to factory? Maybe this can help with the Bluetooth issue until new firmware can be issued?
Marshall,
Recently purchased a used G80R CD that didn't come with the footswitch pedal. Looking to be able to switch channels and turn off/on the reverb. Is there a specific pedal for this model amp, or is there a universal pedal (Marshall) that will work? Can you provide an item #?
Thanks,
Eric Z.
I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library. I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times. Nothing seems to work. I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing. Does my amp need to be serviced for Bluetooth connectivity?
I'm actually a bass player who records at home, and I have to wear the hat of a guitar player when I do. I don't know enough about the intricacies of Marshall amplification to know what amp produces what? I mainly use a 12 string bass, so finding the right Marshall to produce the frequencies I need to sit right in the mix is trying, especially if you don't know what's what? I've been sticking to the workhorse setting of Rock..a Tele through a Plexi. But the sun don't rise, and set on a Plexi. I think I remember reading in a early review of the Code, that there was a Yngwie setting? If anyone knows how it's done...?
Hello,
I took delivery of a Code50 last Friday, and already I have noticed a major flaw. I have updated the firmware, and it didn't solve the problem.
1. On many of the presets, there is what sounds to me like a slight buzz or a distorted sound as the chord is being held after about 4 or maybe 5 seconds. Obviously, this isn't going to be good when recording.
For example, I have been using many of the clean sounds, such as, American Clean (preset 32). This is a prime example of the unwanted buzz as the chord fades (only 4 or 5 seconds). There are so many more presets that also have this problem.
The issue occurs through both the Code50 built-in speaker and my Beyer Dynamic DT100 headphones. Using headphones proves that it is not the internal speaker at fault.
I can email a sound byte if you need one.
The last thing I want to do is re-box the amp and return it for a replacement only to have the same issue happen with the next unit. So, please can you let me know if this is a widely known fault because, if it is, I will unfortunately have to send it back for a full refund.
2. A second issue worth noting here is that the clean sounds are not very loud. When wearing headphones, I have to increase both volumes to 10, but I can still hear the strumming of the actual guitar with my plectrum coming through the headphones. The volume on the clean sounds are too weak and definitely not loud enough when also playing through the Code50 speaker, not just the headphones. Conversely, the distorted rock sounds are really loud when the volume is set to a low level, but the clean sounds couldn't be more opposite.
It will be a shame if I return the unit because I love the app and the ability to back up presets and also search for new ones.
Many thanks