I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?

I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?

I use a Marshall CODE25 and a BOSS GT-8. The GT-8 has a jack that is used for channel switching when the amp allows it to. Is this a feature my amp will be able to use or no?

Hi,

can my Code 100h works with a standard midi footswitch? The Code 100h has a midi-usb but my Digitech Footstwitch has a standard-midi inteface: can i use an adaptor midistandard-midiusb?

thanks,

paolo

I recently purchased a new code 100 which was a display model. They didn't have the box for it or the owner's manual. I subsequently downloaded the manual off the internet. On one of the pages concerning the front panel functions it talks about the F/C jack socket and mentions "connect the supplied 2-way footswitch" but I never got one with  it. Has anyone recently purchased this model and did it come with a 2 way footswitch  for scrolling through presets? If so I will try and get one off the shop for free. If they argue their way out of it are they expensive to buy separately? **Update to this is that the manual I have downloaded has code 100 and code 100h on the cover so maybe the footswitch comes only with the 100h?

Hi,

I own a Code 25 amp and my footswitch started doing weird stuff recently.

It keeps on turning on and off, even though its connected to the amp with a cabel,

I tried using a diffrent cable (the one that came with the footswitch), but the same happened.

Can I do something to make it work again? 

Hello,

 On my footswitch PEDL 10044 6-way  for JVM 410h, the diode N°3 (OD1) is HS.

what is the reference of the diode, to be able to change it,  please.

  (cf : attachment)

thank you very much

 Franck

I couldn't resist!!!

It ACTALLY EXISTS (evidently)!!!

After all of this time trying to ascertain whether or not these things were available (or even existed) I found this on eBay last night (the ONE AND ONLY ENTRY for, AND IMAGE of, this footswitch ON THE ENTIRE INTERNET) (aside from, of course, the usual descriptions that the CODE100H was SUPPOSED to be supplied with this footswitch which, to date, has never been confirmed by anyone) (at least not to me).

I did, however, happen to also see a post where somebody has been supplied the WRONG footswitch with their CODE100H!!!  Well: below is what you SHOULD have been given!!!  LOL!!!

Anyways.  Didn't buy it.  Just thought I'd share!!!  LOL!!!

Regards,

Dale.

Hello guys, i own a marshall code 25 since last summer and about one week now as i play the sound dies sudenly. The amp seems to work all the knobs,the footswitch but no sound at all. The sound comes back when i restart it but after 5-10 minutes of playing same thing happens. I have installed the latest firmware. Does anyone else has the same problem? Any advices would be pretty much apriciated. I bought the amp from andertons, i sent them an email like 3 days ago but no answer yet. Is there any warranty?

I recently added the tuner to my footswitch (preset), but now I want to undo it. I'd rather have the first bank available for a pre fx- preset. Doe anybody know how to undo it, ig by resetting the footswitch to factory settings?

thanks

I just recieved my Code 50, and am still trying to learn how to use it. The main thing I'm interested in doing and learning is using an expression pedal to go between sets but am not sure how to go about it. I was told I may need to get the additional Code footswitch to make that possible. Help please! 

Need a Replacement Footswitch for JCM 2000 DSL 100 head from 2003. originally had a 2 button footswitch. What models footswitches will work with it? Thanks

Hello,

How can I program my code 50 so I can switch up/down through all my 100 presets?

I am using a 2 button footswich. Connected to a code 100H it worked fine.

I saw in a demo video that Marshall will soon have a 6 button footswitch for the DSL 100HR.   Does anyone have any idea when that will be available?

Hello, I need advice. How and where do I register Amplifier Code 100?  You can register footswitch PEDL 91009, PEDL-10025 GV-2 Guv'nor plus, PEDL-10026 BB2 Bluesbreaker, Headphones MONITOR ?  I live in the Czech Republic, where I bought the goods in e-shop muziker.cz.

Amplifier in combination with PEDL 91009 is really supreme . I have a month and I play all the time, much better than FENDER.

For my use bad Windows software. I'm using CODE Patch Editor, there's a lot of options and there's nothing extra. Is there any other code software? Where I can edit and create new presets, play Backing Tracks. Similar Fender FUSE. I would like to buy it :-)                                                        

Thank you in advance for your answer.

Regards, Michal :-)
                                                                                                                                           

                                                      !!!!!!! MARSHALL FOREVER!!!!!!!!

Hello, 

i switch through my presets with  the Marshall PEDL-91009, however, this pedalboard only has 3 switches and a bank switch, however i would like to have a pedalboard with more than 3 preset switch button for faster recall ... is there a solution (maybe via MIDI) , or a compatible footswitch that i am unaware of? 

Hey all - new to the forums, new to Marshall amps and had a few questions about the Code 50 I just ordered that will be here in a day or so.  I have played my guitars through my buddy's Code 50 and am familiar with editing the patches, tweaking the tones and getting the sounds that I want from the amp to fit my playing style.  What I am not familiar with is the use of footswitch and any Midi capabilities it may have.

1) Can one use just a regular on/off type of old school footswitch to turn an effect or amp on/off or initiate a patch change?  I have several old school footswitches I have successfully used on many different amps, albeit older amps, and it has always worked.  Curious since the Marshall footswitch actually holds presets if anything like that would work.

2) As far as Midi goes, I come from a Line6 multi-effects world and know that many of their multi-effect units have the capability to control effects on/off/parameters and patch/bank switching via Midi commands.  Does the Code software have anything like that if hooked up to a PC/Mac running a DAW that has the capability to send midi control commands to change patches/effects realtime during recording/playback.

Thanks for any input and excited to get this amp.  I am a player of over 30 years and have only ever played through Crate amps for the past 20+ years that have finally given up and the cost to repair is more than new.  Bash Crate all you want but they were loud and proud and with the right EQ/effects loops made some damn good musical sounds.

There is a loud popping noise when I am switching from ultra gain to classic gain channel while still holding or playing, but does not occur when going from classic to ultra. Also my loop pedal's volume is significantly lowered when on the ultra gain channel. Could this be a tube or footswitch issue? Is it easily fixable or do I need to take it in so someone can take a look at it? This was also just purchased on February 3rd 2018. Any help is much appreciated because I absolutley love this amp. 

Got my amp, Code 100 combo and loving it, lucky to have a present of the new PEDL CODE Footswitch.

Being a bit of a noob to this new amp technology, I have managed to save a  preset to the pedal, but no thanks to the instructional video mind you, which misses out the essential part that you are meant to press store on the amp and press the location on the pedal at the same time. There I was pressing the footswitch like it says in the video then trying to store. Very ambiguous instructions there, not clear at all.

However, one question is, once I turn off my amp, are the settings on the footswitch wiped out or are they stored until I want to delete them?

Also, it appears that I can only store to the pedal from the amp. So what if I'm using the amp in 'blue' mode from a hand held device?

 That doesn't seem to work for me (using my preset from my handheld device and storing to the pedal that is) as it keep defaulting to an Amercian preset.

I may be doing something wrong, therefore I thought I'd ask the question, rather than just pull what little hair I have left out in frustration.

What are the limitations on the Code pedal? The documentation is woefully inadequote IMHO. The suppport video being just as poor.

I know the issue, it's software designed by software developers, with no end user experience being considered as opposed to using a UX team during development.

We either need more indepth clear and concise instructions, or a new video showing a detailed example how to save a preset (not just a voice over while looking at flashing LED's) and whether we can save, not only from the amp, but save a preset from the handheld device and store them for later use.

Sorry if the above is a bit of a moan, but if nobody moaned nothing would be done.

If you could answer my points above, that would be helpful.

Thanks

C.

I just purchased a new DSL100H and provided a footswitch that doesn't work. It tries to switch channels but as soon as I lift my foot the channel reverts back.  The model number of the switch is PEDL-90010.  I read in the manual that the switch I should've received is a PEDL-90009.  They both look similar but does anyone know if that makes a difference? Thanks.