Yes, I've read the many questions of the same nature on the forum, and performed all the suggested actions. None of them have been successful. I've seen many questions similar to mine, and only a few who have been able to make it work... and of those who did, their solutions didn't work for me.
When I connect my amp to my phone's bluetooth, it will pair for audio with no problems. I can play audio through the amp. When I open Gateway, there is no "red button" prompting me to connect. When I tap on the CODE tab in the menu, it says "Not connected" and when I tap on the green "Scan for apps" button, nothing happens.
It will connect to my Samsung tablet with no issues.
Here are the steps I have tried:
Factory reset on the amp.
Unpair and forget the amp in my phone's bluetooth settings.
Uninstall the app from my phone after clearing the cache and the data.
Update the firmware on the amp (the browser window said I was up to date but I installed the latest firmware anyway.)
What else can I do? I don't want to return the amp because it sounds great, but not having the amp controls on my phone is a deal breaker.
Hi Marshall,
I am havin issues connecting my CODE 50 with my iPhone via Marshall Gatway app. Bluetooth connection is working and is connected with iPhone, but when I open app, app finds the CODE 50 amp and then it says "Connecting..." and nothing is going on. If I tap on my amp under Amps Detected, gives me this message:
"Connection Rejected - You may only control amps you are already connected to for audio output". Please help.
Hello !
I have a Code 50 and I use the Gateway to play, but it does'nt stay connected. For half an hour of playing, I have to reconnect 4-5 times. Do you know why ?
(The Code is the only Bluetooth connection in my phone).
Thank you !
JFG
On the Gateway app I can playback very little music. I can easily play music with iTunes (Bluetooth) but I am referring to using the playback feature. I have tried to playback 50-60 songs, some of it is purchased but all of it is downloaded. Why do only certain songs work. This is a huge issue for me and one of the main reasons I bought the Code 100H and 212 cabinet.
I bought the Marshall Major II Bluetooth headphones almost two years ago and they were doing well and I was happy with them. Now there's a problem with the controll knob on the backside. So I mailed the support service and got excellent help from them. I mailed some https aka ms remoteconnect photos and conformation that I really have bought them. Now they want me to totally destroy them by cutting cables and snapping them in half before they can send new ones. I find this quite an unusual procedure and want to know if this is normal and if anyone had made similar expierienced and if this is trustworthy.
I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library. I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times. Nothing seems to work. I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing. Does my amp need to be serviced for Bluetooth connectivity?
Goodness me!
I just unpacked my two brand new Stanmore 2 (Voice) speakers.
I am using an IPhone XS max on IOS 13.6
I successfully connected them to Google Home and can use this app to play music.
I successfully connected them as generic Bluetooth devices and can use them individually for Bluetooth audio.
BUT I cannot get Marshall's own IPS apps to recognise them!
Marshall "Bluetooth" doesn't recognise their existence when they are switched as Bluetooth input, neither does Marshall "Multi Room" when they are switched as WiFi input.
So Marshall's own apps are a FAIL
Apparently I need the app to be able to "Couple" them as a stereo pair, which was the reason I purchased two speakers!
Anyone else having a similar problem?
I did notice on the Apple app store a comment from a downloader who had experienced the exact same problem, so clearly this is a known issue for Marshall.
I have reported this to Marshall support but I have no experience of them so I don't know how responsive they are?
Hi,
I have found a weird thing that may or may not be known with iOS + Bluetooth and the Code 50.
The CODE 50 when playing backing tracks / using it as a Bluetooth speaker is very quiet (So the master is wacked up and the playing guitar is extremely loud).
and the weirdest thing (which physically makes sense but still it shouldn't do it) is that the Amp is predominatly a Left speaker when playing music through bluetooth as my phone (iPhone 6S) thinks my amp is bluetooth headphones rather than speaker (as the headphone icon pops up on the top right).
My amp is on the latest firmware update.
Is there any fix for this? There's nothing in the gateway app for audio balencing
hi, i have marshall code 100h, but its BT version is not 3.1. The version is BT 0000000, help me, please. My code does not appear on the device to connect
Hi Guys and Gals and the Marshall Team... I am trying to connect my Marshall CODE Amp to my Laptop via a USB Data Cable but its saying "CODE: Not Connected".. Any Solutions for a fix??? Do i need to PAIR my code amp with bluetooth again????? Thanks Ben
Hi.
I have a set of Minor II Bluetooth headphones and they’ve worked great up until I switched from an Android phone to an iPhone. I like to have them connected to my phone and also my laptop at the same time whilst working. The problem is since I’ve been using the iPhone, I keep hearing the short noise as if the headphones have just connected to a device over and over again. Every minute or so, the sound dips and I hear that noise. It’s extremely annoying and I end up having to disconnect from the phone to stop it. Does anyone know how this could be fixed?
Thanks
Hey, about a month ago, the preset readout faded to being almost unreadable. Then today, it stopped working completely. I can't use it for my guitar or as a Bluetooth player. Not sure what to do next?
Hi there!
Do you know a way to use bluetooth connection as audio transmitter on Marshall Code 25?
I have to practice at midnight, so i need to be silent for my neighbours.
Otherwise only solution is to buy a bt transmitter? Any idea?
Thank you all who read this.
Hi. I love my Monitor Bluetooth headphones. Except that someting has been wrong with the control knob for a long time now. Sometimes it takes "forever" to activate bluetooth. Yes it is charged and yes I press the button for five seconds. I have carefully unscrewed and checked that the cables seem to be alright.
Is it a common problem?
Can it be fixed?
I ask to the Marshall team the following questions :
Why is the sound of music through Bluetooth so bad ?
Whay can't we use command of the code 50 to correct : Bass, Middle, Treeble ?
It is really a pity that the difference of quality is huge between the soung of guitare and music !!
Rocky yours....
The new Stockwell 2 seems to come with an auto-standby mode, meaning it shuts off after between 5 min and 20 min (seems to be different from a phone versus a laptop?) even if the connection via bluetooth or jack-in is stable. Although the sound is nice for the size, the speaker is barely useful in settings where sound is not played all the time.
Team Marshall, can you please provide an option to define a custom time (let's say 2h) or completely disable the auto-standby mode either by a Firmware update ob by integrating the Stockwell 2 into the Marshall app? Thanks.
Best
Rey
I just bought a Code. I can connect via bluetooth however it won't download any patches because it says it's not connected even though it is. I bought the USB #2 cable (that doesn't come with the amp) and the amp still says it's not connected to my computer even though it is. Other modeling amps don't have this issue. Marshall, you REALLY dropped the ball on this amp.
Dear Marshall-Team,
just bought a code 25. I wanted to pair the code 25 with my IPhone X and the gateway app, but it doesn´t work.
The Phone is connected to the code 25 via bluetooth, but the gateway app is installed successfully, but doesn´t recognise the code 25 to pair.
I´ve already tried all recommended troubleshootings without success.
Could you please give me any further help.
Thank you in advance.
Kind regards
Oliver
Hi,
I just bought Stanmore 2, I can link it via Bluetooth to my iPhone 11 Pro just fine, but it just won't play anything. When I start playing any music in the iOS player, it just plays it via the iPhone speakers, not via Stanmore 2. I have tried "forgetting device", "manaully restarting" it by clicking the proper buttons as it says on your website. Even when I play music in the iOs player, the player in the Marshall app is empty and nothing is happening.
The only time it appeared to work was on my laptop, when both the speaker and laptop were muted and I moved the volume on Stanmore 2. The same however didn't work for either my PC or my iPhone. And both my PC and my laptop say that the speaker has "0 % battery". It wouldn't even firstly work on my laptop, only half an hour later.
So what the hell is going on? Do I have a faulty model? The speaker cost almost 350 USD, I wouldn't expect such problems. Could you please advise me what to do?
Thank you.
Best,
Jakub Doležal