I am connected to my Code 100H via bluetooth and using Marshall Gateway app and trying to play a song using the playback feature and the song will not play. My music library was found and I can pick the songs ok and they appear in playback, but will not play. I just wonder if this has anything to do with Apple Music?
I am using my Ipad and also tried with my Iphone 7.
Frustrating, please help!
This amp sounds nice, and I really want to play with the tones, but I lack a compatible phone for it. I have an LG stylo2, but I also have two macbooks, an imac, and hackintosh. I even got the bluetooth to work on the hackintosh. The play store keeps giving me the error that "my device is not compatible with the software." Followed the instructions to get it on, but to no avail. So, I'm stuck hoping that Marshall gets the message and develops some iOS software for this thing. So, what do you say?
I timed it.
I’m not looking for trouble, im just looking for customer service. I’ve got far better use for my time then sitting on this forum, trolling for answers that will never come—unless YOU, Marshall Amplification changes, which is highly unlikely. You guys are going to be getting a very brutally cold visit from me at the NAMM show!
After going through the entire Blootooth connection process again, which takes like anywhere from 5-10 minutes to get connected, I went to the MyMarshall.com website to download some of the interesting amp models which other users have taken their time to create (thank you to all who have fond this!) When I download, it goes to my actual login like it’s supposed to, but how do I get it from the mobile device to the amp? Your video isn’t clear, but do I have to have my device connected to the USB of the amp? If so, when is the frigging purpose of having Bluetooth then? If not, what am I doing wrong?
I await for your robotic response. I’m sure I’ll still be right where I’m at after it comes!
Your copy/paste response to everyone is unacceptable!
You know damn well that most bought this amp online! There is no talking it back to the dealer, other then sending it back for a refund!
I hope others agree with me here that the customer Support for this amp is HORRIBLE, if not worse, nothing compared to the REAL Marshall reputation!
We all have the same trouble with Bluetooth. When one ends their session, turns the amp off and shuts down the app, it is impossible to reconnect again without having to delete in your device’s Bluetooth connection to the amp, then going back to the amp to Pair again.
The problem is YOUR programming and design. This amp is great sounding when standing alone, working the controls on the amp itself, but try using a mobile device or tablet, and it’s failure as an amp is evident! This could be simply remedied with the design of a new application and updated, new programming of the amp. Instead, you continue to reply the same thing over and over again!
i ask every Code 25 owner here, am I wrong?!?
Ive had this amp five days now and I’m totally frustrated!
Here are my issues:
• Bluetooth Connectivity
The amp loses connectivity with the MyMarshall app constantly! I’ve followed the instructions. I’m sitting less then a foot from the amp, yet it loses connectivity from both my iPhone and two different iPads. It literally takes me 15-20 minutes to get the thing connected, reconnected, and then, BOOM! Again, the sound changes settings on the amp mysteriously, this after taking 15-20 minutes to get the sound and effects exactly the way I want it. I can’t save the setting, because it disconnects the app from the amp, even though it says on the amp and my iPad settings, that I’m still connected. Utterly frustrating! It also limits what time I have to practice because I’m spending most of that time trying to get it reconnected and sounding right again.
Also, after following the directions explicitly, I still have to reconnect the Bluetooth from scratch every time. The app sucks.
• Apple OSX /iOS compatibility
Guys, Your the best amp manufacturer in the music world. The music world is OSX/iOS based. Get your brilliant minds together and allow for the amp to be Updated via Apple products!
• The amp and application
This is a great sounding amp, I’m enamored with the sound as I am with most Marshall Amplification products and the price well within reason, but not just the app is HORRIBLE, but also the effects are also less then desirable. I just can’t seem to get chorus, phase, flanger or echo sounds to my tastes and desires. Same with the auto wah. I just can’t believe you can’t duplicate the same great sounding effects as you have in many of your solid state amps.
I’m hoping you can help, if not, this amp is going back in the box and being returned.
How to connect Marshal Code 25 via bluetooth to Android
Actualy my first try is on Samsung S5 Neo and they did not working
I try My Asus tablet Android 7 and thy connected with no problem Marshall Gateway working fantasticly good
ive got the app downloaded, Bluetooth connected, but playback doesn’t seem to work out of my iTunes library. Also, directions how to operate the delay and modulation effects.
Any help much appreciated!
firstly, i am disappointed with the code. this amp seems like its still at test phase, its to buggy for a release. would expect marshall to only release a new product unless its 100% reliable.
connecting ios devices to code is always problematic. very unstable.
my main problem now is updating firmware. cant update in chrome. i have midi capability approved for marshall but keep getting midid disabled error even though i clearly have midi enabled.
tried opera, and the midi is working and the code is coming up as connected. i get as far as a message stating that firmware is updating with a status bar and percentage marker. doesnt update! stays at 0% and never moves. left it overnight and still 0% when i woke.
i have spent more time messing about with the problems with this amp than playing guitar. do i need to sell this and just buy a guitar interface? maybe
also, when using this amp through garageband there is no dedicated clean preset to use with garageband or other AU. basically it goes into garageband with a marshall preset and then the other AU preset is on top of the marshall preset. ideally this amp should include a straight clean unprocessed preset to work with other software AU's. i really do think people need to consider a good quality guitar interface before purchasing this amp. its very restricitve and unreliable. if you are not gigginG i dont see the point in this amp.
CAN SOMEONE HELP ME WITH THE FIRMWARE ISSUE ASAP!
Can I connect to my code 25 via USB to my RCA Voyager tablet cause I can't Bluetooth to work
The amp doesn't show up on my Bluetooth
I recieved my Code 100H this week.
(FYI) I attempted the update with a MacBook Pro with USB-C, High Sierra 10.13.1, Chrome Browser. I was able to connect to the Code but the unit would not update. It was stalled on the progress bar on the unit at 0% and on the browser.
(FYI) I attempted the update on a Windows machine and was successful using the update utility and with Chrome Browser. The Code unit shows updating to 1.4.1 but the boot screen shows 1.11?
The Code 100H will not connect to any Bluetooth device I have. Windows, Mac, iPhone, or iPad. It does not even show up as a device and never has even out of the box. I am convienced it does not work. Is there a master reset button combo for the unit? I am out of ideas concerning the Bluetooth. It seems like I am not the only one having issues with the Bluetooth. If this can't work consistently I am considering returning the unit. Even the simplest device can connect with Bluetooth and hold a connection. My Code 100H won't even show up as a device to connect to. Please advise.
i have connect my phone whit the amp code 50
but in de gataway app i see the code 50 but when i press connect he sais not connected
so i dont work what is the problem
my Code 100 head arrived 2 days ago and I still can't get connected via Bluetooth with either iPad or iPhone.... Very Frustrating if this continues I will return this piece of S..t it did connect once but Never again!!!!!!! What's Up With That!!!!
Code 50 setting up bluetooth connection and when I use my iphone or ipad to pair the iphone/ipad asks for a 6 figure number to be seen on the code 50. problem nothing shows, have spent ages trying closing down phone ipad amp etc
I just ordered my CODE 25 but I couldn't find any info about bluetooth playback, only via input jack.
Is that possible? Thanks a lot!
Hi all, hope someone can help me with this,
got my code 25 Friday, all set up starting making a few presets of my own all hooked up working fine.
been using it this evening. Working fine turned off to grab some food came back and now it won’t connect to the Bluetooth.
My phone keeps showing an error message saying it can’t connect make sure the amp is on and in range. It is and is respectively.
tried all manner of phone first then amp on and off first.
Went out the car and made sure my phone would connect to that and it did fine.
Anyone with any ideas?
i have an iPhone 7+ running iOS 11 and a code 25
like a said was working absolutely fine all weekend.
I bought the Code 25. I managed to pair the bluetooth but on app it does not connect. I can see the AMP in app but it cannot connect.
I Have a Samsung Galaxy S8+.
Already updated the firmware.
Unpaired, paired again and I have always the same problem.
How can i proceed to connect the app to the amp?
I’ve used my Code 50 for the first time since updating my iPhone to iOS 11 today, and the Bluetooth connection is dropping every few seconds. I have to close the app, turn Bluetooth off and on and reopen the app. Then it drops again. I never had this problem before updating my iOS.
Has anyone else seen this?
Hi Support Team!
I am using a
Samsung Galaxy S7 Edge Device
with Android 7.0
and Gateway App v 1.4.2
to a Marshall Code25 with the latest Firmware Version (as of 25 Sep 2017). The Firmware Update Utility says v 220.127.116.11 N in the bottom left corner.
I was able to use Gateway to control the Code25 until a while ago, I am not entirely certain if it was until the latest Android Update, but have a strong feeling it was until then.
Now I am able to pair the devices, connect via Bluetooth, Stream Audio over the Code, also able to FIND the Code in the Gateway App, but unfortunately I am not able to connect in the Gateway App. When I tap the Code in the Connect Menu, it says "Connecting..." but then nothing happens. It just will not connect.
I tried all your troubleshooting from the website, including Firmware Update, re-installing Gateway, unpairing, forgetting device, re-pairing etc.
I always end up in the "Connect..." mode and am not able to control the Code via Gateway.
I was very happy with amp and experience and really liked the remote function via mobile and Gateway app, even more now I am very disappointed that this bug persists already a few weeks with no App update or firmware update seeming to fix this.
Please try to recreate the bug with the described configuration and please find a solution and release a bugfix/new software version.
Many thanks in advance and kind regards