Is there a capability to control the CODE100H via a BOSS ES-5 or MUSICOM LAB EFX LE loop / switcher? (Via MIDI/USB)???


asked 26 Nov 2019 at 04:35 PM

Ziggy 75 (10)
i use my code 100h with a meloaudio midi commander. with midi cable into pedal midi, the midi cable into midi usb host (miditech), and from usb hosto to usb into marshall code. it work good! so: pedalborad midi -> midi usb host -> usb code 100h.
- Paolo Goi 22 Jan 2020 at 09:08 PM
Thanks for the reply, I had the same result with the MusicomLab EFX-LE switcher and with the Kenton USB-MIDI HOST ... It works perfectly !!!! - Ziggy 75 23 Jan 2020 at 12:47 PM
Answers: 2


I did a connection test for a MUSICOMLAB EFX-LE looper / switcher at KENTON USB-MIDI HOST and CODE100H. The result is that the MIDI PC1 command sets the CODE100H to preset 00 ... (MIDI PC100 = Preset 99). It works perfectly !!!!

edited 23 Jan 2020 at 12:55 PM

Ziggy 75 (10)

answered 06 Dec 2019 at 01:14 PM

Ziggy 75 (10)


Hi Ziggy,

Thank you for your message, this is not something we have tested, so cannot answer on this, the Code can be connected by Mobile device or the FootSwitch.


Marshall Support

answered 26 Nov 2019 at 04:45 PM

Thanks for the reply.
I just need to know if it is possible to change the CODE100H preset with the midi command "PC # 001 ... 100", (where 001 is the CODE preset 00).
- Ziggy 75 26 Nov 2019 at 04:57 PM
Loading - please wait...