Code 100 foot switch doesnt always work properly


Hi all

Very often when I press the down channel button on the pedal, the amp goes UP and channel!

Its a pain in the but, makes it impossible to play with,  tell me there is a fix for this?

Thanks all!

asked 28 Oct 2021 at 12:51 PM

Matt Sykes (2)
Answers: 1


As far as I know, footswitch dedicated for CODE series amplifiers does NOT have "down" and "up" buttons, so you probably use wrong footswitch.

answered 28 Oct 2021 at 03:18 PM

Jacek Klimkiewicz (183)
It is the foot switch that came with the amp, it has two buttons, one for up, the other down. About half the time it works, then it screws up.

Let me repeat, IT CAME WITH THE AMP. IT WAS IN THE SAME BOX AS THE AMP. It has an up arrow, and a down arrow, and has CODE written on it.

- Matt Sykes 28 Oct 2021 at 03:55 PM
Yes, you are right, I didn't know about that. So it must be something wrong with this footswitch, I think you should contact seller. I strongly recommend to buy PEDL-91009. To be honest - I can't imagine using CODE amp without this device... :-) - Jacek Klimkiewicz 29 Oct 2021 at 09:55 AM
Loading - please wait...