Freinds,

In the past, occasionally, my Code50 would cause upper register tones to sound out of tune, quavering, in fact. If I reinstalled the firmware, the amp functioned properly. Now, no matter what setings or what guitar I use, the problem persists. I have reset the presets and reinstalled the firmware several times.

The amp has not been abused or subjected to inappropriate use. In home studio only.

What can you tell me?

Jim

Is there any way to reduce the lag time when switching from one preset to another preset while using the Code footswitch ?. There is about a 1-2 second delayed reaction for the amp to change between presets. We really need a flawless and definatly instant process when switching from a  rhythm crunch to a lead solo or a clean to a lead or any other preset switching.

Dear Marshall Team,

I have just recently got my code and thanks for this really nice amp. I got world class sounds for this low price and again.. thanks.

Gateway really makes me much happier and  I plan to bring it up to stage for small ocassion, without footswitch (not available in my country), with the help of gateway and no need to bring those heavy gears. But I realize that I can not switch from one to another setup in a short time while playing.

So in getaway, I would suggest to add one tab showing 4 buttons which is, in individual mode, bassically on off switch for prefx, mod, delay, and power. And other 2 buttons for bank up and bank down. 

So, if we have 100 preset then it can be grouped and stored into 25banks with four variation that can be selected from those 4 buttons.

Just like the layout of multi effect processor.

Emm... need a switch to select individual or bank mode... and square bright yellow and red lamps for each button.

Emm... and display to show the active bank and sub bank... like 24.2 (bank no.24 patch no.2).

Sorry if it sounds like asking too much.

Did I?

Cheers,

Javen

This really stinks...

I have a brand new Code 25 and it stops playing through the speaker after a few seconds.  The output is always there when I plug in a headset, but the speaker plays for a few seconds then goes quiet.  I redownloaded and installed the firmware.  I tried different settings and different presets.  Nothing works.  Any other advice before i talke it back to the Guitar Center?

Hello, I have already bought a Marshall code 25 (yesterday).

Unfortunately I overwritten the fx #49 on #15 an I don't know how re-obtain that fx 'cause I very like that. 

Hi. First just to say that a am generally very happy with the CODE50 & it is definitely filling a gap to provide great practice tones with aux input from LickLibrary & my son's vdrum set to jam along! I have a coupe of items I wanted to put out there to the forum:

So the fizz - has anyone else noticed a very high end (treble) fizz or harsh crackle to the tone on most 'unsaturated' presets? It almost sounds like a digital clipping at the high end of the spectrum to my ear. It is definitely worse when using my 2015 Gibson Les Paul Less+ (which has the brass zero fret nut) like the amp is reacting to some of the pronounced higher frequencies on this guitar but it is also noticable with other guitars using a standard nut material.

The cabinet resonance I guess is due to the relatively light weight MDF that the cab is constructed of which appears to vibrate a little too readily has the master gets to about 1.5 / 10. I have dabbled a little with the resonance / presence settings under the speaker cab which has helped control it a little but I would be interested in any other ideas for reducing that boooom that can wash out the tone. I do have a 4 ohm Celestion G12T-75 from a long broken Marshall SS 50w combo which I am thinking of trying out - it is a physically heavier speaker than the CODE one pre-installed but I don't think structurely this will be a problem for the cabinet. I would appreciate any other ideas - anyone added noise suppression foam to the inside of the cab (as used in noisy PC towers) or anything else?

Cheers all.

Hi&Hallo for everybody !
I'm looking for setup to play that kind of sound (or clouse enough):
https://www.youtube.com/watch?v=cjbtbNXQ0_Y
- Someone knows preset setup to get similar  sound (code25)?

I just bought this amp yesterday after flirting with a Blackstar HT20 and realising I wanted a Marshall again. Well, starting to wish I hadn't bothered.

Like so many others, I can get my phone (Samsung Galaxy S5) to connect to the bluetooth and actually play music through the amp. BUt Gateway will not find the amp within the menu. I've tried all the uninstalling Gateway, reinstalling, updating the amp's firmware - even tried using my daughter's Samsung S4-mini which again, connected to the audio but will NOT FIND THE AMP!

I have a Samsung Galaxy Tab 4 which is a good wee tablet but apparently isn't compatible with Gateway.

Seriously. So I have 3 different devices and not one of them can connect to my new amp.  Clearly this is a fault with the amp itself since the same thing happens with two different phones.

Please don't tell me to go through that long list of uninstalling, reinstalling, removing the bluetooth device and reconnecting etc etc. I've been doing all that since I got the damn amp yesterday afternoon. 24 hours later and none of it has worked.

Is it at all possible this is going to be addressed SOON in either a Firmware or Gateway update? Clearly, if the amp is faulty I will need to return it soon to get my money back but, honestly, I'm loving the sounds I'm geting with the presets, I just want to edit them rather than all the hassle of returning the amp to the shop!

I saw a review on the Google Play Store for the Gateway app from a guy in June 2016 - that's 7 months ago - and he was having the exact same issue. So if it's not been addressed in all that time and Marshall are still sending out these faulty amps, what hope for a fix? Please tell me there is one!

Hi, I have the Marshall Code 50. I found some pretty good sounds for a few rock songs. Is there a way to share my personal presets with the Marshall Code community?

Best regards

Can someone please help me to find some AM presets or could someone please tell me how I could produce my own with the effects on the code amps?

Hi, is the marshall team planning on releasing any more presets for code. I know a few were released on the 20th December and user presets are released regular but I would like to see what the team can come up with being the experts as a couple really good and suit my style of playing  ( Big Blue & Glacier).

cheers.

Can I turn the 100 presets off on the CODE amp? I don't want a High gain setting or a looper setting or all of these weird settings I kind of want to just make my own setting, if you will.

I want it to be like a regular amp atm. Is that possible?

hi, how do i add a new preset on a code 50 without using one of the factory installed 100 presets?

Hi,
I have a problem when saving Presets from my Marshall Code 25 amp to my phone (Android).
The saved Preset repeats/copies itself about 20 times. Therefore, the app Presets are unusable because I have to scroll down or up 20 duplicates before I reach the next Preset.
There is no way to delete those Presets, and when tapping on one the app freezes.

I already posted this same question in an existing thread in which other people were notifying this same issue, but that post was deleted...
In that post you said you where working in a solution to this, but its have been 5 months since the first report of this problem, so
I'd be grateful if you could fix this as soon as possible and kindly ask you when do you plan to release the Gateway app fixed?

Thanks!

Ive seen 2 diferent presets on preset 00.  Mine has EL 34 Heaven and some has Screamer that has a Boston-style sound.  Are there two versions of the Code 50 amp?

Hi,

is it possible to use more than one "stompbox effect" within a preset and how does it wotk??

for example auto wah & compressor

bernd

I received my code 50 today, when switching the amp on the display never changes from 'Marshall Code'. turning the preset knob won't change the display either, accessing the amp wie the app works. I also tried resetting the amp which won't get me past the 'Marshall reseting presets' screen. Any suggestions would a firmware update help?

Hi, is the JCM2000 available in the presets some post on YouTube give this option as a custom preset but I can't find it on my amp.

regards.

How can I view and download other peoples presets on the Code?

I own my Marshall Code 50 for one week now and are pretty happy with it. Still exploring the endless possibilities.

Also downloaded the gateway app. Happy with the  new feature to select the location for the edited patch. You should be able to do that on the amp but I did not manage to do it...

What I miss in the app:

1. Create a favourite list.

2. Save edited presets in a user library so you can upload them from there to the amp.

Hopefully the pedal will be available soon. For gigging this is a must have.

Greetings and keep up the good work!