How can I back up my presets?
Code 50, Firmware was up to date.
I used the amp while practicing for an hour or so with no issues other than Bluetooth connectivity.
However, when I used the amp at band rehearsal, the volume fluctuated and diminished to where I could not thear the amp at all.
Hi all, can anyone here recommend a mic suitable to hang in front of a Code 50? The band I play in predominantly performs at wedding receptions, playing pop/rock, top 40, retro, rock n' roll, etc (nothing heavy). Cheers...
My headphone jack doesn't seem to be working when I play music through my computer. It sounds fine when I'm playing the guitar and listining through the phones but when I listen to music one side of the stero spectrum sounds low and distant. The phones are new and I know they work. Could this be a software problem or should I send the Code 50 back and get a replacement. The amp is brand new.
Hi.
My JVM 410C have problem whit the reverb on the cleaner canel,I turn it all the way down,but it's still there.
When I turn the amp off,and on again, it's ok,play som minus and the problem is back.
What can be wrong,how to fix /repair it?
The problem started when i hadde used the TC Nova System for a weekend play ingen, I used it in the effect loop,and i also used som reverb from Nova System.
Thanks for replay
Greatings from Norway
I have my Code 25 connected to my Mac via USB. When I use the Code as an audio out, the stereo signal is not correct: the signal is principally the left side of the audio output with a little bit of the right side mixed in.
When listening via normal headsets, and then switching to the Code output, the difference is very noticable. Almost a mono signal.
Will you be creating a gateway program for a desktop pc. Don't have a smart phone.
my output mute button doesn't completely mute the speakers; it cuts the volume low but still sending a signal to the speakers. is this a simple circuitry problem? or has anyone experienced this?
Is marshall 2555x are manufactured handwired
what type of foot controllers work with the MG250
How would I start a warranty return
I'm expecting my Mini Silver Jubilee head to arrive tomorrow. I have two 1x12 cabs I want to use at the same time. One is a 8ohm Mesa Boogie. The other is a 16 ohm Orange cab. My question is; is it possible to use both cabs at the same time? I'm looking at the manual and I'm not so sure. Plug the Orange into the 16 ohm output and The Boogie into a 8 ohm output? Or would that be too much of a load? Thanks.
Would you be able to check if my amp registration went through correctly? Code 50. Wouldn't want to miss out on the extended warranty.
Hi, I'd ke to use an external speaker with my Code 25.
Is it possible to use a 8 Ohm external speaker without any trouble ?
Thanks for your answer.
Hi, I've just bought a DSL5C combo that sounds fabulous.
Just to know when I will have to make tubes replacement, can you tell me:
Thanks
just got the amp home
spent an hour trying to connect to an iphone 6s...it will not connect
what is the fault...it appears I am not the only one struggling to connect an iphone
where do i find the detailes ownwers manual on your site please
Hi I thinking about purchasing a footswitch for a MG100 Marshall head I have a G100R Head will these work together?
Hi,
I've 2 old marshall 1912 speaker cabinets and 2 questions:
1) how can I remove the front panel for cleaning the grid?
2) there's a dedicated cover for the 1912 cabinets?
Thanks a lot
Hi Folks, it seems like a good number of the presets have this wierd thing where the low E sounds really dead and overwhelming, like one giant "PLUNK". I need to turn B down to almost 0 in some cases. This is mostly for single coils which is strange since all other strings seem to be brighter as youwould expect with SCs, just the low E has this strange sonic sig. Same guitars sound fine on my Quilter, DR, even my little Vox mini. I can "tone" it out for the most part. Is anyone else experiencing the same symptoms?
Thanks!
Dave
