Ive read the manual for the jvm410h but dont fully get the outputs.

All i need to know if anyone can help it what out puts do i use on amp and cabs when i plug into my 1 1960a and when i use my 1960b too so half stack full stack.

I need idiots guide.

Thanks 

Anyone know what the V and  stand for in this Marshall DSL 100H Amp serial number 'V-####-##-####-H' what do the V and H stand for ?

Thanks

Richard

I have a Code 100 and my instructor has Code 25 amps.  I neeed a consise explaination of how to copy a preset from a Code 25 to my Code 100.  So far, the tutorials and FAQs have been more confusing than helpful.  I have the Marshall Android app and can connect to the Codes but have not method of copying setup from one to another.

Can anyone steer me in the right direction?

Thanks!

I purchased a Marshall Code 25 Watt amp today, and I am trying to connect it to my phone (Samsung s6 Edge+) via bluetooth, however, my phone will not discover it when scanning for available bluetooth devices. I have reset my phone and cycled the amp, and the problem persists. Are there any known issues with these devices or any workaround that I should look into?

Can you download user patches from your phone via blu tooth or do you do you have to connect your device via USB cable? 

2nd question - if it is connected to USB cable, does it work normally? I ask because I had a line 6 that required a printer type USB cable, I bought several and none of them worked. I'm wondering if the Marshall Code 50 is this finicky too. 

Thsi is NOT a question. More of an eye opener, if you do this.        

     Take your PERSONAL cell phone. Pull up GOOGLE  PLAY. Not this site. The actual Google play store. Pull up Marshall gateway.....READ THE REVIEWS......They say it all......Your app, that you designed, SUCKS....I could understand blaming phones if it was maybe 3 or 4 out of 50 reviews. But, that's not the case here. You have 50 bad reviews (1 star) to every 55-70 reviews.....Not good....If you're not going to fix the app......DISCONTINUE THE CODE LINE!!!!!!!!!!!!!!!!

I bought a Marshall Code 50 amp and the LCD display lights up but will not display any text at all.   I want to fix this problem so I can use my amp again!  I tried to use bluetooth with the Gateway app but It won't let me edit my settings on the app it doesn't do anything.  If anyone knows how I can get the display fixed or to read text please voice your answers.   Also the factory reset does not help.  Thank you

Presets need to flow easier between the different management areas.

(Reading the following is really only cumbersome, because that's how cumbersome it is to manage CODE.)

Copying one by one between amp and phone is really cumbersome.
How about an option to copy all 100 presets (or sections) between amp and phone? Both ways.
I want my amp to have the same presets as my phone.
(Others can still have the option the way it is laid out, but I don't see how managing amp and phone separately is useful unless someone really needs 200 different presets in one session.)

I like to have my preset sequenced in a way that makes sense. Artists, cleans, crunch, OD, Amps, or new additions squeezed next to existing ones. Others may sequence by set list or bands. If I shuffle presets on the computer/gateway, then the phone syncs this new sequence, and the amp does not match. Gets confusing.
Additionally, if the footswitch is assigned from the amp, then I have to copy new presets from phone to amp and even reassign to footswitch. Too many steps.

"Just use the presets on the phone and forget amp presets" would be an answer, but what about footswitch? and what about dead or forgotten phones?
Easy (automatic?) sync (with on/off for this auto/sync) between phone and amp, would allow everyone to use the amp (and footswitch) without constantly pulling out the  phone and pairing to have presets from the phone available. Bluetooth drains batteries.
Btw, any phone sounds come on the speaker  when playing because my iphone6 sees the amp as a headphone. So the presets need to be on the amp for any gigs.

Another footswitch suggestion:
A setting or function where the first 30 presets (01-30, without 00) are loaded into the 10 banks on the footswitch automatically? Then I only have to manage my presets within the 100 and everything else is assigned automatically?

I have Marshall Code 25 amp. and usually when I´m playing a few minutes the sound of the guitar disappear???I have turned off and on for return to play. Is Normal???. Is Brake????. Thank you.

hi there,

i'm pretty new to the whole cabinet with heads mixing and matching, i have only used combo's before and i am wondering about the power output of the code 100H which should be 100 watts if i am correct but the 412 cabinet is rated at 200 watts? so are you kind of limited as to what the cabinet can do or how does the whole power rating work? i ordered the 100H and 412 cab but i just want to be sure i'm not missing out on something bcs the power rating isn't correct

thanks guys!

Hiya! Can anyone enlighten me about tone pots in Marshall valvestate 2000 avt20 combo. need to change middle desperately, and maybe others. cheers!

Searching for Metallica and Megadeth tones... is it possible to find thoses presets somewhere ??????

Has anyone tried using the code 50 with wireless headphones?

I have a pair of seinheiser 120ii, and I just get this weird "feedback" sound when I plug them in.

The headphones work fine on all my other devices, but not with this amp.

I tried 2 other sets of wired headphones, and they seem to work fine with the amp.

Is this a known problem, and is there something I can do to fix it?

Thanks

Gerbrand

Can the CODE 100H head handle a 16ohm load? I realize the wattage will not be a full 100watts, probably 80-85. 

I can use a Boss ES-5 to switch between Clean/Crunch/OD1/OD2 using program changes but sending MIDI CC#13 for the loop state works sometimes and CC#14 for the master volume select never works. Is anybody able to use Boss ES-5 or ES-8 MIDI to control the master volume select and loop state?

Hi!

I'm new in the marshall world and don't have any experience in speakers but I recently have bought a Marshall Acton Bluetooth, but the speaker when turned on and no sound have a static noise (like zzzzzz something like that) and even when I put some sound the noise continues but I only can detect if I put my ear in the speaker. 

It's that normal? I'm asking because I have the speaker connected with my Amazon Echo Dot and I want that they stay always on and I don't want that static noise...

Regards.

Hi All,

As it was mentioned on this forum connecting additional looper pedal isn't possible in a direct way, bacause there is no FX in and out. 

I'm wondering If anyone has experience in building FX Loop using AUX In and Headphones Out in Marshall CODE 25/50 amp?

Can it work? If so, is this a good option?

Mike

Got a Code 50 and footswitch. Still learning it, but happy so far.

I'd like to use the footswitch, in part, to jack up the volume for solos, but keeping the preset and effects the same. What's the best way to set that up?

Hello

I have the PEDL90008 switch hooked up to an MG15HFX.

Switch one stopped working. Its not the cable and the amp still switches from the front panel.

As the cable is only 2 conductor I'm guessing the pedal uses banked resistors to create voltage switching. I'll be able to check when I find my meter.

I don't want to try it on someone elses amp in case it blows it. Nor do I really want to buy another if its a simple fix.  It may even still be under warranty (can't find the chitty) but the carriage is probably half the price of a switch so hardly worth the effort.

Anyone know if this is switched resistance? 

Any other suggestions?

Regards