I have a code 100 combo and there is an output on the back just like the code 100h. Is it possible to plug the code 100 combo into a speaker cabinet and just use it like the code 100h?
Hi,
Just wondered if anyone else had noticed that when you send a user created Preset to your amp the settings often don't match the settings shown on the website? There have been a couple i have tried now (including the 2nd highest downloaded Angus Young Preset) that i've sent across to my code only to discover the settings aren't the same as what's listed on my laptop screen? This is really annoying as you then have to tweak everything to match! The preset always sounds better if you match it exactly too as some settings are way off! Can anyone shed some light on this?
i have purchased new dsl 100 h head. I am resident of India. The standard voltage here is 240V at 50 Hz. But there is lot of voltage fluctuation. Could you please recommend what specifications should I look for while buying a voltage stabiliser ?
I have purchased new marshall dsl 100 h. I found a cable in the box along with foot switch and power cable. Is this cable a speaker cable or instrument cable ?
Just got a CODE 100, 2 x 12" speakers, the model printed on the back confirms that it's a CODE 100, but the bezel says CODE 50 on it.
Whats the deal?
Hi, how are you. I would like to know where to find a manual in French.
Thank you all.
Hello everyone. I would like to know if an update for the code was envisaged. if yes, marshall, can you accelerate the time of change of preset in midi .. it's so slow! we have the break of the preset change. it's too bad. thank you
HI all,
There is a DSL15 head with MX412 for sale at a good price about an hour away from where I live and I wanted to ask a couple questions before I decide if I wanna go check it out or not.
Is a 4x12 too much cab for the DSL15? I mean, will it have the same punch? I don't play in a big space so that's why I love the 15/7 switchable watts on the head. Would I be better off with a 2x12 or even a 1x12? I have a Blackheart Handsome Devil combo that has 15/7 watt option and it's great but I want a half stack configuration and, well I just really want a Marshall!
My second question is about the tubes. I notice the head uses 6V6 power tubes unlike the big guys with EL34s. Is there a big difference? I have a Fender that uses 6V6s and it's great, but I want that Marshall roar. Can the DSL15 get me to close to a good Led Zep classic rock type sound or should I go for something else?
Cheers!
Some how, I was playing with my foot switch and erased all of the presets, leaving me 2 channels, working on clean. The other 2 channels, od1, and # 4 crunch, do not work. Can anyone help?
Can I use 2 pedal efects at the same time? Like distortion and pitch shifter at the same time?
Hello can someone tell me why I have no sound on the cabinet when I plug a headphone on my code? Thanks.
I have an iPad 2. I can connect my Code 50 via the iPad's bluetooth settings. It pairs perfectly fine. But when I try to connect to the amp in the Gateway app, nothing happens. I can't see the amp and can't connect to it. Is there a fix for this?
Hi,
I purchased Code 25 recently and it worked fine. I suppose the firmware was 1.11 until after the update through windows software, the amp stopped working. Switched it on, the LED screen just flashed repeatedly and non-stop, the user interface wasn't there, nothing else were there except blinking orgrange screen. I couldn't get it to work.
There was one particular moment I got it on for like 5mins, performed a factory reset. But then it went back to the flashing orgrange led screen.
I'm stuck. What do I need to do?
I brought it home yesterday and hooked it up in the studio, started going through the channels starting at 00, got into the teens before I even found one I could stand. Every single one was way too bright. I turned the treble down on those and they were almost acceptable until I started playing with enthusiasm, then way way too sharp again.
I tried 5 different guitars, all of which sound great with the orange and vox amps I have already in the same studio space, nothing sounded good.
I got into the 30's and was so dissappointed, I was going to take it back - just couldn't deal with it even though the power, range and flexibility was so cool. I finally through a thick sweatshirt over the front (double thickness) and tried again. Everything was fixed.
So my question is can I open it up, put a double layer of material between the speaker and grill so I can stand it and cose it back up without voiding the warranty or do I just have to deal with an amp covered by a hoodie?
I just bought the CODE 50 and like it alot; I also have the GATEWAY APP on my phone.
(FYI: I literally must have 25-30 other Top Notch Amps- MARSHALLS / SOLDANO / HUGHES KETNNER / LINE 6 etc;
But I needed something very small for some of the tiny gigs we do; and I feel the CODE has better "Sounds" than my Fender Mustang GT - was using)
MY QUESTION:
-I just created 15-10 CUSTOM PRESETSon the CODE. They are obviously saved on my CODE 50 AMP ....as Presets 1 -25;
-BUT: HOW DO I ALSO SAVE/STORE THEM TO MY GATEWWAY IPHONE APP???!! (aka; so I don't "lose' them, in case I want to use on another Code Amp, etc.?)
(Basically I'm afraid if I do it wrong; I'll restore the Factory Presets onto my Amp and all my work will be lost!)
-AND; if I do that; will MY PRESESTS stay in my "APP"; even when the Amp is turned off and not connected to App?
Please let me know and thanks (and any other Suggestions or INTEL!)!
Dave Saul
ELECTRIC DUDES - NY
Hi, I want to know if there is any development that will make phones like mine compatible with the Marshall App, it would be a huge disappointment if I cannot get to use the app since my phone is modern and running Android 6. I'm writing this before even having turned on my brand new Code 25. It says your device is not compatible with this version on google play; get this fixed for us people! it's 21 century for Gods sake! thank you.
Hi, I have seen on the forum that the code can be used as a solid state amp if all the amp /preFX / cab etc are turned off. After trying this on my code 25 I found that the tone knobs ( bass/ treble and mids ) and the gain don't work so all I can do is adjust the volume. After speaking to a code 50 owner he reported that on the 50 even after turning off all amp/ preFX. etc the tone knobs are functional.
Regards.
Dear staff,
I have code 100H with 412. I have add presets from browser, I updated the firmware without problems but when I change preset positions on that page (My gateway) and hit save, nothing happens. I use Chrome and MIDI connection works fine.
How can I solve this problem?
Thank you.
Francesco
I know how to slave the two stacks together using the effect send of the primary and into the return of the slave head. How do I properly access and use my effects loop in this situation?
Hi all,
I bought the Marshall Class 5 combo about a year ago, and while I think that the concept is fantastic, the actual product isn't. Unfortunately, I think the stock combo sounds rather terrible. Plugged into my 4x12 cab with Neo Creambacks, the sound is vastly improved, though, so I'm thinking about getting a 1x12 cabinet to go with the combo for smaller rehearsals and gigs. Now, the Neo Creambacks eliminate some of the fizzy, harsh and unpleasant frequencies from the combo at higher volume settings, but I'm hoping to get rid of them completely. I'm currently thinking about one of the following two speakers: the Celestion V-type (this would be my first choice) or the Eminence Governor (which people compare to the V30, but with less of the harshness). In your opinion(s), which one would best achieve the sound I'm looking for?
Best,
Michael