How do I access the noise gate for a Code 50 amp? I'm trying to use a wah wah pedal with the amp and getting a tremendous amount of noise thru the amp. Thank you

Hi,

I have a JCM 800 100 Watt Lead Series, Serial Number is S/A 17873R.

S/A was not use for 50 Watt ?

Thanks

Emanuele

was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?

also if the 2 way cant can the bigger footswitch?

I recently bought a marshall major 4 from an unauthorised store and wanted to check if it is legitimate, the serial number of the headphone is 73400553L23495B0089194.

the headphones feel great and sound awesome aswell but i still am suspicious about it being legitimate.

thank you in advance.

Hi

Would I be able to run 2xJVM 215C amps in stereo in 5 cable method ? I'm a little confused about the 2 x master volumes, I imagine that if I use one for my master volume (Master 1) I would adjust that to the same level on both amps and if I use the second master volume for solo level (Master 2) I would need to adjust that as well on the second (slave amp) as well as the master amp (the one with the preamp I'm using).

To access the solo boost on both amps I would send a midi PC command to both amps which would enable the Master 2 on each amp which would then be at the same level?

Would that be right please ?

Thanks

Paul

good morning I purchased a marshall code 50, I immediately updated the firmware to version 1.48, I performed all the possible procedures for connecting to the phone, when I press rev and pover it goes into pairing mode and the blue light flashes but no phone that I have tried and sees it in the devices, is there a solution for this problem?

My Action 2 froze in the middle of a firmware update.  Nothing works now...resetting doesn't help.  Marshall won't help without a receipt, but i got the speaker as a gift.  What else can be done?

Hi all, I recently unearthed a 100w wedge monitor. It's huge, really heavy, and really old !

I've never encountered one before, so wondering if it's the real deal ? The serial number plate states, Made in England, with a number of 'A 01870'.

Much obliged ! 

Gary

At first I couldn't load any community presets in the gateway app, so i reinstalled and now I can't login. the websites SSL encryption seems to be gone and im worried that marshall won't notice for a good while, anyone know when this'll be fixed?

My Emberton II worked great for a couple of months. I really liked this little thing and was already planning on a larger model for home use. But since a couple of weeks I cannot shut down the Emberton anymore. When I press the center button, it shuts down as it always did, but shortly after it just turns on again and connects to my phone again. And it keeps on doing this until the battery is completely dead.

I have already tried disconnecting all attached devices, doing a factory reset, but the problem just remains. Can something be done about this or is it just faulty?

I receive the following error when trying to set up my Acton II Voice with the Google Assistant built-in speakers using google home on my iOS device: "the operation couldn't be completed. (kgskerrordomain error - 83902.) 

I have done all the basic trouble shooting such as performing a factory reset on the device, rebooting my phone + internet, changing the language on my device, but nothing seems to work.

Any suggestions on how to fix this issue during the set up?

Hello

when turning on my code 50 amp I wasn't able to get any public presets made by the community iv tried factory resetting the amp reinstalling the gate way app numerous times but when signing back in I get the same error message my amp has not been updated with the recent firmware but I'm unable to because I can't sign into my account on the gate way app any fixes

The error message says

"An SSL error has occurred and a secure connection to the server cannot be made"

Hi, 

I'm having some problems with my Marshall MG15MSZW Zakk Wylde Mini Stack and would like to know where I can find the wiring schematic so that I can go through it to locate the problematic electronic component(s)? 

I have not found any local service centers that possess this information so they're no help and can't fix it.  

Any help would be greatly appreciated. 

Thank you, 

Mark

Hi everyboy,  even though I am registered in MYMARSHALL, I cannot vote on any preset from any other user. When I am not authenticated the vote icon appears on the website, but when I log in the icon disappears. Why? 

Hi. I bought a Acton III and discovered that the right MEDIA CONTROL does not work: when I press on it nothing happens.. I have already updated the firmware and done a factory reset. But the problem still exists. Is there a way to fix this?

I am struggling to connect my two acton 3 speakers to play as stereo, I bought them because I should be able to connect them together, but I am afraid I will need to return them. I tried everything from the Marshall bluetooth app, Is there any solutions?

I have a dsl40, although I don't know if it is a 40 or 40c by serial number it is a 2013?  I bought this used a couple weeks ago.  It did not come with foot switch.  

I have purchased three of them and they don't work on my amp?  It looks like Marshall has a different pedal for each year.  I have seen pedal numbers (pedl?) 

but those pedals did not have that number on it.  How do you tell.  Sorry for so many questions.  Can pedals on the fx loop and the front input work at the same time? Any help would be greatly appreaciated.

Thanks!

Hello.

I had that issue for a sometime on my code50 but now I know a bit more  about it.  For at least two years  this amp was changing preset settings why I was playing on it  At first I did not reallise  that especially on clear sound, but after some time with distorted sound  it was obvious that sound become louder and more distorted. Visually I could see that display become dim and almost always was changing from number and name  page of the preset to page with settings.  Now I can see when phone is connected settings on the app are changing as well. It is gain, volume, bass, middle   and treble  parameters which move up. Master is staying like it is. After changing preset to other one and coming back to the same preset it will stay normal for some time (few second to few minutes) and change again.

I tried to update firmware but that did not help. For some time I was suspecting power supply issue as sometimes  electricity in my place can be not up to standar , but now  I am sure that is not a case.  Any idea what cause that problem and how to fix it?

Hello! Do you have any idea where I could find a fitting button to replace a missing one?

Wondering if anyone has had or heard of this issue?

Code50, less than a year old.

Me and a buddy are somewhat beginners, and playing Deftones and Chevelle type songs. I have a "Deftones style" distorted heavy tone preset loaded that I'm playing on.

So after an hour or so playing, the tone will start to sound "metallic" and kind've have a "ping" to it, if that makes sense. Sort of sounds like you have a speaker inside of a giant metal cup.

Sorry if this is a newbie question, just sort of confused.

The guitar was new in October, so I assume it's not the strings. I also tried swapping to my Jackson guitar, same annoying metallic pingy sound when strumming. Changed the cables too.

Any ideas?