I've got a Valvestate S80 8240 which has developed a loud hum whether instrument plugged or not.
The hum disappears when it is tilted forward. Can anyone suggest a home fix?
I put up this question before but for some reason it seems to have been deleted!
I recently purchased a CODE25 to use as a practice amp. It looked like something fun I could play around with.
The first few days it was ok as I was only using some of the factory presets. Trouble started as soon as I edited one or saved an online preset. The sound dissappeared (speaker) and the display got very faint. Restarting the amp made the display ok again but still no speaker sound. I reset the presets (hold down Amp while turning it on) and that seemed to do the trick.
But soon after the sound issue started again. I reset the amp presets, re-installed the firmware, but I only had sound for 2-3 seconds after boot, then nothing.
I have now discovered that if I plug in a headphone (which has sound) and then unplug it, I have speaker sound again. This makes me even more confused. I haven't tested long enough to confirm that this will work over time.
I see that there is a lot of posts regarding sound issues and requests for a long overdue firmware. But have anyone found out any new tricks to overcome the issues?
I sent an email to Servicedesk last week but haven't recieved a response of any kind.
Does anybody know when Code firmware update is expected to be released?
Current version causes serious issues with Bluetooth reconnecion after the amp is swiched off. Also Master Volume does not work evenly and my CODE 25 is definitely too loud for practising at home.
Hello Marshall,
How can I see the Firmware version on the Code 25? Also can you display somewhere on the Download page exactly what the current version is?
Can you confirm the latest Firmware is v1.0.0.13
Regards
Paul
Hi,
is it possible to use more than one "stompbox effect" within a preset and how does it wotk??
for example auto wah & compressor
bernd
Hi i need a footswitch to my vintage modern 2466 amp. Where can i buy one? or the functionality off it so i can build my own.
Tnx for makin asskickin amps:)
Jonas Bonnier
Hi, I have a problem with my Marshall Major II bluetooth, because all the time while using the microphone from the headphones the sound from that is very unclear. It's not depended on the system, it happens on Mac, Windows, iOS etc.
I have a CODE 50 and can not find the right Top Gun Anthem tone settings. Can someone please advise?!?! Thank you in advance
Hi my Marshal Tufton is not turning on or charging what could be the issue i have only charged and used it once the second time i tried charging it it was completly dead .. is there any electric fuse that could have be the issue..??
Hello,
I was wondering if you could recommend any extension Marshall cabinet for my Class 5 combo amp.
As per the link , https://marshallamps.com/support/faq/impedance/ ... where can I find that information on your website?
Most of our combos have an extension cabinet designed to match its size and sound. Our website has full details of which combos and extension cabinets work together and the user manuals, available to download from the support section, give full explanations on how to connect them. We recommend going to your local Marshall Dealer so you can test out the combos and cabinets to see which one suits you the best.
Regards,
Antoine
Got an issue with my Marshall Stanmore wifi speaker. When playing music through Wifi or Bluetooth the volume always goes down on its own. Have to turn up the volume between 5-10 times before it stops turning down the volume on its own. Wifi and Bluetooth connection are fine, it has this issue which each connected device I've tried and with all apps (spotify, Google Music, YouTube,...). Any idea on settings or stuff i can check? Maybe a firmware update something?
When running my Marshall DSL 40 C at high gain/volume, or on clean channel with crunch engaged at higher volumes, there is a noticeable "splat", an odd sonic artifact that occurs--more specifically on the B note, 9th fret, D sting ( Standard tuning ). Could this possibly be a faulty/inferior preamp tube in the V1? Other than that, the amp sounds glorious, performs well, and there are no other issues. Thoughts?
Trying to update my Code 50 to the new firmware but it says "Not Connected" to the computer. I've tried everything that is on the troubleshooting page, I have an Mac pro and tried with both Crome and Opera. Last time I updated it was not any problems.
I have following versions on the amp (see this when I'm starting the amp in the bootloader mode)
BL: 0.6
MCU: 1.3
DSP: 1.1
Do you have any more tips on how to update the firmware to the new?
The Code 25 makes a strange sound when letting a plucked guitar string sound die out, only when "amp" is selected (might be digital artifacting?) I saw one question about this via USB, but what I hear is not via USB, just out of the amps own speaker, no USB connected!
Thanks
Hello. I have a Marshall Code 100 Head, 4 12 cabinet and the 2 12 combo amp. Absulutely love these amps. I also have the 3 way footswitch. What I can't figure out, is how to be able to turn off and on the REVERB from the foot pedal. Is there a way for this? It defaults to allow you to access the Distortion, Modulation and Delay but what about the reverb? Any ideas?
Thanks, Larry
Hi, the reverb switch on my TSL602 footswitch unit does not work. With the footswitch unit connected, I cannot therefore switch on any reverb in any of the channels unless I remove the footswitch from the back of the amp (which allows the reverb to work) - but then I have no way of changing channles other than pressing the manual switches on the front of the amp. Where can I purchase a replacement switch to see if thats the problem? Thanks.
I downloaded the windows program to upgrade my code50 to latest version...everytime i try to run the program it shows loading then disappears...nowhere on the screen...how do i use this to check for upgrades..im hoping that theres is a patch to fix the editing the preset names problem. seems when holding down the store button to get the left scroll if you hold it too long it goes to save...if not long enough nothing..sometimes you get it just right and get the left scroll screen.sometimes the amp locks up and it has to be turned off then on again to rebboot..and you have to redo..
My DSL401 has just started to intermittently volume drop i.e. the volume gently fades down to nothing - leave it a while, and the volume returns to normal. Also, the effects loop doesn't seem to work as it used to - for example, if I plug a delay in to it, the delay is hardly noticeable when you play. Not sure if the issues are related or not. I've not had any issues at all over the last 12 years and the tubes have not been swapped out. Grateful for any advice. Thanks in advance.
I wrote in a question you can please excuse me as now that I have the amp in hand, I am very happy. This is excellent.
I would consider how to add a high frequency speaker so music streaming is a bit brighter, but I notice the sound via USB is pretty good and one up on the Mustang series which did not stream music out the USB port. Thank You. I kept my G-Dec 3 Thirty around for that reason (plus tweeter and line outs - I might add). As I get used to this I might find the headphone out sufficient but wish you had added Lineout so the speaker stayed engaged but could take the lineout to other amps or recordering devices.
Can you tell us which interal speaker is used, ohm rating and the frequency response?
I do not want to open it up to figure it out since I plan on maintaing my warranty, at least for the next year.. :)
Thanks,
James
PS who signed off on this design, give them a raise :). But if you had a version with the features I mentioned, I would gladly have paid the additional cost and only been fully satisfied. Like I am at 96.75% now. You can quote me.
My CODE 50 will pair with my iPad, after some difficulty.
However, all it does is let me hear my email notifications through the CODE! It will NOT pair with Gateway ever!
This is a big deal because access to the amps controls is impossible without a remote connection. I'm sorry, but the control layout is a POS if you must rely on the amp interface. Who sits on their amp when practicing or gigging? The top position was a TERRIBLE IDEA! Fire the idiot(s) who came up with that disaster! The Bluetooth MUST WORK AND BE RELIABLE in order to make this amp useful!
I have followed your tutorials and cannot waste 30+ minutes monkeying around with this junk every time I attempt to use it! I have even deleted and re-installed Gateway with it paired with the ipad with no change.
Look, I don't care if you have Jimmy Page locked up inside this thing, if you cannot offer a solution for the Bluetooth issues, it's going in the bin!
