Questions
Showing results 241 to 260 of 3578
1

vote

0

answers

667

views

I'm using a google pixel 2 and the app is not connecting with the amp although the phone IS already connected to the amp.

 

I've tried my wife's samsung s9 and it works ok. 

 Edit. Ok, Now It's working. But not only i had to forget the device, I had to do a Bluetooth, Wifi and Mobile reset. And after I reinstalled the app. 

The reset option is located in Settings>System>Advanced

So everyone else having the same problem and still not working after forgetting the amp on Bluetooth settings and reinstalling the app should try this instead.

Can't be more happy with the amp

I hope this can help anyone.

edited 02 Apr 2019 at 06:34 PM

Ezequiel Facundo Otheguy (1)

asked 01 Apr 2019 at 10:29 PM

Ezequiel Facundo Otheguy (1)
1

vote

3

answers

1.7k

views

I have, or should I say, HAD a Marshall CODE 50 which after 20 months of service decided to quit following a POWER SUPPLY failure.  I took it to an electrical repairer for diagnosis and found out, through Marshall Australia and UK that the power supply is not replaceable because it has been suspended.  No parts available.  That means I now have an amp that is unfixable and never will be, even with an aftert-market power supply - which, according to Marshall cannot be retro-fitted.  What a fantastic waste of money that exercise was, and I have zero warranty fall-back.  Has anyone else had the same problem?  Kev

asked 01 Apr 2019 at 03:01 AM

Kev Lawlor (1)
1

vote

1

answer

1.1k

views

Hello, just purchased a Code 50 and so far I'm very happy with the amp but there are still a few things unclear with the Presets and Gateway. I have connection with my laptop or via android, that all works fine. I've downloaded a few presets from the website and want to use them on the amp. 

- The standard 100 presets are  there when I connect to the amp. If I want to add new presets do I have to override one of the standard presets? I thought 200 was the limit?
- And another thing,  if for example I upload a new preset to the amp the name of the preset doesn't show in the display. 

I tried the manual or Youtube tutorials but none are very clear on this subject. 

 

 

asked 06 Mar 2019 at 09:45 AM

Wim de Nooijer (1)
1

vote

3

answers

2.8k

views

Hello Group! I am about to receive my new Marshall Origin 50 watt head on Monday (March 5th). I'm excited as hell! I was looking for a 50 watt platform to go through my hand made Tweed 1X12 cab with a EVM12L that I built three years ago. I just had a bad expierience buying a Fender Bandmaster VM with a blown digital effects board. The repair facility could not obtain this part from anywhere. I wound up returning it to Reverb.com and was out all the repair money, two 5 hour round trips and $55 to ship it back. I was really devistated until (by accident) I stumbled onto this Origin series amp. I owned a few Marshalls in my day but this one really caught my eye. My question to you guys is this; normally amps come through with pretty basic tubes. I have no idea what the Origin comes with as far as stock tubes. Being the perfectionist that I am and the gear freak I've always been, I'm already wanting to upgrade the 12AX7's (EC83s) and the EL34s. Any suggestions as to a good upgrade or are the stock tubes pretty good? Thanks guys (and gals)

asked 01 Mar 2019 at 12:23 AM

Lonnie Perry (1)
1

vote

0

answers

833

views

Does anyone have a good Shadows Hank Marvin preset?  wishing to get that proper sound on Apache.

asked 26 Feb 2019 at 02:16 PM

Doug Curl (1)
1

vote

2

answers

658

views

The app still has problems to link with the amp CODE, when it will be solved approximately?

asked 18 Feb 2019 at 08:15 AM

JORDI SANCHEZ (1)
1

vote

3

answers

1.1k

views

Twice now I have spent more than an hour reorganizing the default presets into preamp groupings, in the Chrome browser, clicking Save periodically with the checkbox checked to save a backup copy. Each time, Chrome or MyMarshall stopped accepting my clicks on the Save button in the lower right of the browser. Each time I seemed obliged to close the browser window and then navigate back to my presets. Each time I found all the presets reset either to their original order or at least to an order very different from the one I had created by the time Saves stopped being accepted. (I can't be more clear than this because I do not have the default preset order memorized.) Each time, I could not find any backup with my reorganized presets, so I have no idea what the backups are for or how to use them.

Is it possible to sort presets based on the preamp models and save them that way in the CODE50? Is dragging and dropping each preset, one at a time in the browser on the MyMarshall site, the only way to reorder the presets? What and where are the backups and how can we use them?

BTW, changing the preset position in the Gateway app is problematic. When I tried saving preset 15 as preset 1, I ended up with the same preset in positions 1 and 15. The original preset 1 was missing.

edited 13 Feb 2019 at 10:05 AM

Jim Marshall (12)

asked 13 Feb 2019 at 10:03 AM

Jim Marshall (12)
1

vote

0

answers

952

views

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

 

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

asked 01 Jan 2019 at 07:22 PM

James Graham (12)
1

vote

0

answers

1.2k

views

Hi Everyone,

I have a CODE 50 amp...

1. Connected from PC using AUX cable so YouTube/Songsterr etc plays through amp.

2. USB connection to same PC for recording to Audacity.

When I play (headphones in) Audacity records the guitar perfectly but doesn't acknowledge the PC audio. I can hear both the PC audio & guitar track clearly in my headphones.

Is there any way to fix this?

Thanks!

asked 01 Jan 2019 at 12:19 PM

craig dixon (1)
1

vote

2

answers

30.6k

views

Hello,

My macbook pro 15” 2017 doesn’t see marshall minor ii bluetooth headphones.

Is it possible to connect it?

 

 

asked 01 Jan 2019 at 11:54 AM

Oleg Klochko (1)
1

vote

1

answer

1.2k

views

I'm using a Origin 50 combo. I find when I crank the master volume and play at higher volumes, I get what sounds like glassy tube rattle. There is also just generally more noise than I would expect. I tried it with a different cabinet. It seems to be worst when using the internal speaker or when the amp is sitting on top of the external cabinet... my assumption is that the physical vibrations due to high volume are causing the tubes to rattle. The rattling is getting passed through the speaker, meaning that it is not just simply a physical rattle, but it is a transferred into the signal.

It sounds similar to some of the problems on the internet with the Class 5 that had rattling. Someone suggested that tube rings would fix it. Any suggestions?

asked 27 Dec 2018 at 08:29 PM

Chris Holtmeier (1)
1

vote

3

answers

1.2k

views

Hello, Marshall forum family.  I just purchased the CODE 100H (head only).  I have a Marshall cabinet with 4x12 MG series, and I hate the sound of this combination! Does anyone have advice for a replacement speaker?

Thank You All

Jon Doty

Lincoln, Nebraska

 

asked 24 Dec 2018 at 08:46 PM

jonathan doty (1)
1

vote

1

answer

691

views

Tons of spam, millions of spamers, and nobody to take care about this... 

In many cases I'd like to give an advice, but recently 9 of 10 threads are infected with links to total shit and I've got no idea whether this questin is real, or fake...

asked 17 Dec 2018 at 09:47 PM

Jacek Klimkiewicz (206)
1

vote

1

answer

2.5k

views

Like the title says - I'm wondering if its possible / safe to run the Origin 50 head with the DI connected to a recording device and not connected to a traditional speaker load.

 

Thanks

asked 14 Dec 2018 at 08:56 AM

Tom LeBlanc (1)
1

vote

2

answers

1.3k

views

I have a CODE 50 which I L-O-V-E except for one thing. Effects are not as easy to utilize as stomp boxes.  I have seen on YouTube how Code owners ckearva pre set “turn everything off” then utilize a whole friggin pedal board. I have tried this and it does not work. Actually more appropriately I’m certain I did not do it right or it would have worked fine. Can someone PLEASE list a step by step on how to clear an existing preset to where it is just a “plain” ol’ regular  amp.  THA K YOU IN ADVANCE. I’m beginning to feel as if this purchase was purely a novice mistake but I would love to keep this Code but have the option to utilize my modest pedal board if I do choose to do so. THANK YOU!!!

asked 13 Dec 2018 at 09:54 PM

dwaine brosemer (1)
1

vote

2

answers

775

views

Hello, 

Am I only one who has to do "forget this device" from my phone each time I have to connect my amp to my mobile phone using bluetooth?
Or am I doing something wrong? 

Best regards,

asked 14 Nov 2018 at 02:34 AM

Saleem Nassar (1)
1

vote

6

answers

1.7k

views

I bought a CODE50 2 months ago, and while I really like the sound, it generates cracking/tearing/popping sounds when I apply (even small amounts of) overdrive when I touch a string with my pick/plectrum. I use the JCM800 emulation with low gain and low presence. I have also tried other AMPs such as the JVM. Plexi or Bluesbreaker, but that does not make any difference. It occurs with a BOSS Overdrive OS2 pedal and also with the ODR that is build in, also at low levels.

It happens both with my Fender Stratocaster and my Epiphone Les Paul. I also tried several diffenent plextrums, for example the Dunlop Jazz III, Dunlop Tortex, Fender medium, light and heavy and a few others, but that does not make any difference.

I opened the back of the combo so see if anything touches the speaker that could explain this sound but that was not the case. Normally I like a bit of pick attack sound, but this noise can be so loud that it overshadows the sound of the string, almost like a series of explosions. When I switch the overdrive off, this noise effect is gone.

What could be the reason for this ?

 

asked 11 Nov 2018 at 11:03 AM

Wim van Winsum (1)
1

vote

2

answers

744

views

what to do if my bluetooth is not working when I try to search for it on my phone through the app or any other source. its jsut not there like the bluetooth was never a thing on it. this is the first time ive tried to use it and I think it picked it up once and did nothing else but show it was found. then never again. what do I do? it like it was never a part of the product

asked 04 Nov 2018 at 08:59 AM

adrian MOREno (1)
1

vote

6

answers

3.2k

views

Why in the world would Marshall advertise right on their site for the code amps that you can record the code amp into your DAW, but not provide an asio driver? This is false advertising. Yes there is asio4all, it is not for a Marshall per se, and it doesn't work real well, it only records at 48khz, most daws will go to 96k, if not all the way to 192K? What gives Marshall? Plase put out an Asio driver for this otherwise great product. please. It can't be that hard if you can write the"code" for this amp. You are relly missing the boat here guys

asked 29 Oct 2018 at 05:22 AM

Martin Jubb (1)
Showing results 241 to 260 of 3578
Loading - please wait...