Hello TEAM MARSHALL.

I'm curious about something:

It only ocurred to me last night that maybe, just maybe, replacing the Master Volume (and in my case, on one of my five amps. also the Preset Volume) pot. with a new or replacement (generic, higher quality) pot. would solve this Master Volume issue once and for all.  So to this end I started scouring the Internet only to find that there is not a single supplier that I can find that supplies spares for the CODE amps.  There's spares for just about every other Marshall amp. known to man (including the MG series) but nothing, nada, for the CODE amps.  and this INCLUDES the Marshall store itself.  Your input and thoughts on this???

Also: how difficult would it be to obtain the specs. etc. of the amps. e.g. what are the specs. of the pots. (particularly the Master Volume and Preset Volume pots.)???

Regards,

Dale.

how can i download marshall vertual amplifire for guiter in pc?

I bought a Code 100 a couple of days ago, played it at the store with my Ibanez and worked perfectly for 10 minutes, decided to take it with me.

Took it home, plugged it in my room at 1/4 of the master volume and whenever I play I experience random sound losses, especially when I play lower notes, it buzzes and the sound drops to50%..or 20%, sometimes drops to zero. Then also regain 100% sound randomly, I don't know what's going on...if I strum a chord and let it ring and then ever so slightly give a little tap on the top of the amp - it sends interference noise and sometimes with a single tap the volume drops to zero...and then to 100 with another tap..and I mean giving a tap really gently, not punching or slapping the amp.

I've tried different sockets around the house and the issue persists, what can I do?

I recieved the usb cord for my Code 50 today but no matter what I do it says code not connected.

I even tried the pressing pre fx,mod,rev buttons while turning on the amp but it says code not connected on the amp and amessage comes up on my laptop that says driver not recognized

my pc does not detect the code 50 amplifier. What can I do?

Does anybody know when Code firmware update is expected to be released?

Current version causes serious issues with Bluetooth reconnecion after the amp is swiched off.  Also Master Volume does not work evenly and my CODE 25 is definitely too loud for practising at home.

Hi all, 

the presets on my gateway app seem to have changed, they are different then the ones in the amp? Any ideas how to change them back?

thanks

Hello...I purchased my JCM 800 (serial#02726N) back in the Fall of 1981. I pulled the rear plate off the head for the first time so I could install new tubes for the first time. I expected to find four EL84's, but was totally surprised to find 2 KT66's, and 2 6L6GC's instead. Is this normal? The amp sounded totally different from other Marshalls I was exposed to, now I know why. Did Marshall do this often, or did they just run out of specific tubes and slap in whatever they had on hand. It's kinda hard to believe they did that as the KT66's require an entirely different transformer than the EL34's. Any comments or logical explainations?? Thanks.

Hello, I would like to connect one of my PCs (OS linux) on a Marshall CODE 50 and take control via usb midi.

When I open /etc/dmmidi2 in read acces. Reading file char by char, I see information when I touch the buttons of the amp (PREFX, AMP, MOD, ...). I can find the information in CODE-Midi-Implementation-Chart-V2.1.pdf.

I usually get two or three bytes and cross it with the document.
But this frame is not in the form Start of Transmission> Header> Command> End of Transmission.

By against when I open /etc/dmmmidi2 in write access, I can not send any command.
After having turned on the amp, I sent the following sequence for RECALL PRESETS 05:
0xF0 0x00 0x21 0x15 0x7F 0x7F 0x7F 0x73 0x01 0x05 0xF7
or RECALL CURRENT SETTINGS:
0xF0 0x00 0x21 0x15 0x7F 0x7F 0x7F 0x72 0x01 0x00 0xF7
Start of Transmission> Header> Command> End of Transmission
This command does not seem to work. Is there an intermediary step?

Would it be possible to give me a typical sequence to the CODE or a document that will explain the procedure to operate (ON / OFF) one of the button (PREFX, AMP, MOD, ...) of the amp.
Thank you in advance.
Cordially.

yoann

Hello -

Just getting familiar with my new CODE 100w 2x12 Combo - and noticing that when I am in Gateway/Playback that I can navigate to my

Apple Music and choose/load a song, however when I push play NOTHING happens. (???) ...was wondering if there is a step I'm not aware of

or if this is just the app malfunctioning?

thnx in advance -

Michael Wade

hola a todos alguien tendria para pasarme como configurar un preset Joe satriani

hi coud you send me a presset joe satrian

TKs

after lightning strike close that fried a few electronics my 5212 Marshall is not letting much amplification to guitar with all pots full.

transformer is 120 v in and output load side is 20.8 vac to neutral / .05 / 20.8 vac and has a faint high pitch.

any help would be great.

Timothy Manning

Hi,

The problem that i mentioned in the title hapenned after adding presets to my library and now i can't use the button "sync now"

How can i make the app synchronize whit the cloud?

I've had a great time demoing the presets but once I save one I like into 'My Presets' and add it onto 'My Gateway' list I can't get it to go over onto my amp.

Can I use the USB to put the patches/presets I want directly onto my amp or do I have to go through the Mobile App to sync it?

Re you going to release a cover for the cdoe 2100 combo? I cana see on the Marshall site that you do a cover for the 25 and 50, but why not the 100?

http://shop.marshall.com/k/search?q=codee+100+cover

Hello all, I just bought a JVM 410C amp. Sounds great. However when I switch channels there is a very  Noticeable silent gap. Makes it very difficult for playing out live.

The question:  is this normal for this amplifier? Or, is there something wrong with my new amplifier?

 Finally I still have a few days before I can no longer return the amp, is there a resolution for this?

  The only solution I have so far, is to return the amplifier and get the joe satriani version.

My gear:

Fender Standard telecaster

Marshall CODE 25

my marshall kilburn when it's one day off, when you turn it on and connect the music it stops the sound (micro-cuts) constantly, and this happens for a long period of time

I am using a Google Pixel 2 XL which previously used to run Android 7.1. Today i made an upgrade to Android 8.1 now as I open the app it shows a black screen on initial start up and crashes itself gradually few sec later. Any idea how do I fix it?

Update: An uninstall and reinstallation fixed the issue :) 

Hi, 

Can anybody help me for a Status Quo amp setting?

thanks

mp