Hi, I just got a Code 100 Head, software version 1.11. I noticed, that the FX send reacts to the master volume, after I tried to listen to the preamp section only. While having master volume down, there was no signal at all until I turned the master volume up. But even if master volume is turned fully up, the signal is absolutely low, quite "nothing" compared to the output of my rack preamps (JMP-1 for example). Why is the FX send controlled by master volume? Is there any other possibility with a newer firmware? That makes integrating the Code Head with external effects for a live setup absolutely impossible since having different volumes at different venues. The FX send should deliver a much louder signal depending on the volume setting of the selected amp model, the master volume should only affect the Codes poweramp after FX return.

I bought this Amp because i play different Marshall Amps for over 20 Years now.

The sound is great, but there is always an issue trying to connect my phone with the amp via Bluetooth.

The Amp is in pairing mode, an I tried different Android phones (old ones and the newest), even my
band mates tried a connection. The Amp never disappears on any phone we tried.
Even my Laptop does not even find the Amp.

I tried the firmware update to 1.41, also rebooting, all the things mentioned here in the forum
and in the troubleshooting sections. Nothing works.

I am disappointed, this is not what Marshall stands for!

Hi, I would like to search or filterpatches, but it is not possible to search by  date or rating or date; this is a mandatory feature expecially when you have several pages...it's a shame because there is no way to find the contribution of others marshall  guys who want to share their presets.

Which knob values are stored when in preset store mode. I cannot get any knobs only buttons to retain value following the programming instructions. Pedal malfunctioning? Any other tips outside what the manual has to offer?

Ive had this amp five days now and I’m totally frustrated!

Here are my issues:

• Bluetooth Connectivity

The amp loses connectivity with the MyMarshall app constantly!  I’ve followed the instructions.  I’m sitting less then a foot from the amp, yet it loses connectivity from both my iPhone and two different iPads.  It literally takes me 15-20 minutes to get the thing connected, reconnected, and then, BOOM! Again, the sound changes settings on the amp mysteriously, this after taking 15-20 minutes to get the sound and effects exactly the way I want it.  I can’t save the setting, because it disconnects the app from the amp, even though it says on the amp and my iPad settings, that I’m still connected.  Utterly frustrating! It also limits what time I have to practice because I’m spending most of that time trying to get it reconnected and sounding right again.

Also, after following the directions explicitly, I still have to  reconnect the Bluetooth from scratch every time.  The app sucks.

• Apple OSX /iOS compatibility

Guys, Your the best amp manufacturer in the music world.  The music world is OSX/iOS based. Get your brilliant minds together and allow for the amp to be Updated via Apple products!

• The amp and application

This is a great sounding amp, I’m enamored with the sound as I am with most Marshall Amplification products and the price well within reason, but not just the app is HORRIBLE, but also the effects are also less then desirable.  I just can’t seem to get chorus, phase, flanger or echo sounds to my tastes and desires.  Same with the auto wah.  I just can’t believe you can’t duplicate the same great sounding effects as you have in many of your solid state amps.  

I’m hoping you can help, if not, this amp is going back in the box and being returned.

How to connect Marshal Code 25 via bluetooth to Android

Actualy my first try is on Samsung S5 Neo and they did not working 

I try My Asus tablet Android 7 and thy connected with no problem Marshall Gateway working fantasticly good

Once upon a time Marshall used to service old Marshall  amplifiers in Bletchley.  Is this still something that you guys do?

Am I able to do a firmware update using my Galaxy S8, or does it need to be done via tablet or computer? Thanks. 

ive got the app downloaded, Bluetooth connected, but playback doesn’t seem to work out of my iTunes library.  Also, directions how to operate the delay and modulation effects.

Any help much appreciated!

Hi, I'm connecting to the Nokia 6, android 7.1.2, code music play goes, but gateway still does not connect, software code 25 updated, restore network settings did not help.....any help?

bought my marshall code 50 last nov 2, 2017 .  When i connecy my Code50 to my computer , says USB on Code50 but nothing happens in my computer . not detecting or any. cannot find it on Device Manager . my usb mini cable is new btw.

I've had a DSL40c for a year or two, and it worked fine until a few months ago.  While playing, the sound cut out and there was a slight burning smell.  I replaced all tubes and pre amps and it worked fine in testing, but then did the same thing when I got it home.  Repair guy thought it was a pre amp issue so changed those out again.  It worked fine in testing, and then did the same thing again when we got it home.  This time when we turned it back on, it would work, but sound would go up and down sporatically with some popping and crackling.  Replaced the tubes again, and it worked fine for an hour.  Then the sound cut out, and we noticed it would not switch channels.  After turning it off and letting it cool down, we turned it on again and it worked fine and channels would change.  I'm not sure what to do at this point.  My weekend routine of dropping the amp off and then getting it back (with high-hopes) has gotten old.  The problems have occurred while plugged straight into the guitar, as well as through a pedal board.  Also, the problems have occurred via multiple power sources in different locations (i.e. not always through the same wall socket).  

Thanks for your help

Hello

Recently purchased the best amp in the world so I could live for music but from day one powering up is producing more weird hisses, crackles and the other day a  bang that nearly put me out of the window ! Only had it for a month ! so far not so good actually nervous about switching it on. Will decide in the next couple of days whether to return said amp and try another brand. Just not confident enough to use it when I play live.

Regards

The Outsider with an Axe

I'd like to know how to fix this problem because i cannot play without my headphones in the amp which is very annoying. I've factory reset it but if i change the preset it gives me after i factory reset it doesnt make any sound. I'd apppreciate some feedback, thanks

I have a Focusrite Scarlett Solo for home recording to my PC. With my previous amp I was running from the direct output to the sound card. With the Code can I go straight from the amp via the mini USB to the PC?

I have an issue when I try and use a looper, the amp will not play both. If it plays the rhythm that I looped, the leads are muted. If the lead comes out the rhythm is muffled. Anyone else notice this?

I have a dsl40c and its faceplate has some scratchs. I would like to raplace that because it looks ugly. How can I get a brand new faceplate? Thanks