Where can I purchase a new EL34 100/100 Stereo Power Amp. I live in Texas.
I about the above in 1985. I just want to confirm what tubes are necessary.
Also, if I could register, that'd be great!
Hi,
1st - on half a dozen occasions my code 25 has locked up when saving an edited preset. The only way to sort it is to switch it off and back on again.
2nd - I'm getting a lot of hissing noisy coming through the amp when playing, when lightly plucking a string the noise is really noticeable this fault is even worse when playing at low volume.
I hope you can offer some sort of fix for these concerns so the experience of play my amp is not a disappointment.
regards.
I just registered on here and 1st thing I saw was about firmware updates? Do I need to do this on my new DSL40c?
Hi,
I recently bought both of the above products. After a bit of messing I managed to get my head around setting up the Pedal. However, now the amp seems to be set to the adjustments made via the pedal i.e. the Overdrive channel now permanently has a delay setting, even when the pedal is disconnected. I have tried resetting the amplifier, but this doesn't seem to reset to factory setting permanently -only until I turn the amp off again.
Any ideas would appreciated.
Thanks
Hi i need a footswitch to my vintage modern 2466 amp. Where can i buy one? or the functionality off it so i can build my own.
Tnx for makin asskickin amps:)
Jonas Bonnier
Can I change EL34 (8-pin) to EL34 (7-pin) Vacuum Tubes on my Marshall DSL 100H?
Hi! I have a 2013 jcm800 2203x head. Can you tell what what preamp and power amp tubes were installed at the factory? Thank you!
I'm looking for a back metal cover for my JCM900 Head. Possibly a user manual. It has a number stamped on the rear of the amp that is Z02174, might anybody know what that number stands for? Any suggestions? Thank's.
I have a a Dsl40c that I need to put in an isolation box for recording. How big of a box do I need to build to keep it from overheating?
I get a error prompt when i try to open the firmware utility that i downloaded for my code 50 amp? I am using win xp and i downloaded it in the opera browser?
When i play youtube videos through the code 25 it begins to lag but as soon as i begin to play it through my phone again the lag stops. This also happens with songs occasionally.
I want to know how to install a firmware update in a code 50 amp? Please list the setting i need to put my amp in for this update?
Just last month I received the PEDL91009 and I just started to really use it this past couple of weeks. I really like the feature and functionality of the footswitch, I am very glad I bought it.
I noticed that if I have the footswitch hooked to the amp and I accidently hit the edit knob on the amp, the amp locks up? I can't change anything on the amp via the amp's switches or via the footswitch, I have to power down and then power up the amp to get it to work again.
Anyone else have this issue?
My DSL40C amp is less than a year old and the speaker cuts out at moderate volume levels. The amp was purchased in the Los Angeles area at Guitar Center Inc., an authorized dealer, but they are not a Marshall authorized repair center. How do I go about arranging for a warranty repair on my Mashall DSL40C in the Los Angeles area?
Jacob
Hi. I am looking for the best amplifier from you range to my adapter. Which one would you recommend.
Best wishes
Lukasz
Hi there ,regarding DSL15C ,just got my amp serviced but the tech wasn't sure he had to bias the 6v6's ? So he gave it back to me unbiased..
Should this have been done ? If so what could go wrong and what info should i give him if i have to do it ?
Cheers Adam
Hi there im wondering how to find out what model my marshall dsl15c is?, i noticed it could be anywhere between a-g? Also does this confirm the date for this amp? As this amp i brought second hand snd has quite a few issues i think i would like a new circuit board that is 100% condition as the micro controller on this amp decides what it likes and the channels freeze and mute..:(
the model number is
v-2012-23-2815-A
id like to know why this particular model is such a lemon with so many problems, i would love to have it working and sounding how it should do but it is costing me alot of time and money..
Hi, is the JCM2000 available in the presets some post on YouTube give this option as a custom preset but I can't find it on my amp.
regards.
I am located in South Africa and have just purchased a Marshall Stanmore Pitch Black Bluetooth Speaker yesterday from the Apple iStore online site which should be delivered in the next 3-5 working days. Being a high-end brand with reputable history and having read several good reviews on this product prior to my purchase, I did not verify if there are any concerns raised about this product. Last night however I searched the internet for any customer complaints on this product and was shocked to find many complaints/problems registered regarding Bluetooth becoming unusable and the unit going dead (not powering-up at all) within the first 12 months of purchase. The aforementioned makes me hugely concerned about reliability and quality of this product to the extent that I am considering to cancel my purchase. I know that world-wide there must have been thousands of these units sold since its launch making the listed problems possibly a small percentage. What concerns me is the consistency of the registered/reported problems and that there might be many more of similar nature which have not been listed by unhappy customers.
Can I please ask you to be honest and confirm if there are any inherent problems with this specific product? I would rather refrain from purchasing a Marshall branded product than to later joint the seemingly huge number of unsatisfied customers when it comes to this specific product. I rely on your integrity to be honest with me in urgently replying to my above question to enable cancellation of my purchase.