My Action 2 froze in the middle of a firmware update. Nothing works now...resetting doesn't help. Marshall won't help without a receipt, but i got the speaker as a gift. What else can be done?
I have 3 registrations with the same top. If I remove one all disapear. I've emailed Marshalal about 2 months ago and received absolutely no reply. Anyone here having any ideas how to get it down to just one registration of my 1987x?
Hi,
I have a JCM 800 100 Watt Lead Series, Serial Number is S/A 17873R.
S/A was not use for 50 Watt ?
Thanks
Emanuele
Has anyone uploaded any Geordie Walker / Killing Joke tones ?
was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?
also if the 2 way cant can the bigger footswitch?
good morning I purchased a marshall code 50, I immediately updated the firmware to version 1.48, I performed all the possible procedures for connecting to the phone, when I press rev and pover it goes into pairing mode and the blue light flashes but no phone that I have tried and sees it in the devices, is there a solution for this problem?
Just found out Kilburn is being scrapped at the end of the year - so that means there will not be a Kilburn 3 - see this post here:
reddit.com/r/Bluetooth_Speakers/s/eezEtlnT70
Why are you doing this?
Hi
Would I be able to run 2xJVM 215C amps in stereo in 5 cable method ? I'm a little confused about the 2 x master volumes, I imagine that if I use one for my master volume (Master 1) I would adjust that to the same level on both amps and if I use the second master volume for solo level (Master 2) I would need to adjust that as well on the second (slave amp) as well as the master amp (the one with the preamp I'm using).
To access the solo boost on both amps I would send a midi PC command to both amps which would enable the Master 2 on each amp which would then be at the same level?
Would that be right please ?
Thanks
Paul
I use the CODE 100 H. My question would be the following: I have configured some settings within a preset to play a song, but when it comes to the guitar solo, how can I increase the volume for the solo? And how can I reduce the volume after the solo? Do I need an external booster pedal? Do I have to have two different presets for the same song in order to have a separate volume for the solo? I hope you understand my question. I don't know how to increase the volume when I'm playing a song with a preset within the bank, when the guitar solo comes in. Do I need to configure two different banks, two different presets, or can I do it within the same preset? I hope you can help me. Thank you very much.
My Emberton II worked great for a couple of months. I really liked this little thing and was already planning on a larger model for home use. But since a couple of weeks I cannot shut down the Emberton anymore. When I press the center button, it shuts down as it always did, but shortly after it just turns on again and connects to my phone again. And it keeps on doing this until the battery is completely dead.
I have already tried disconnecting all attached devices, doing a factory reset, but the problem just remains. Can something be done about this or is it just faulty?
At first I couldn't load any community presets in the gateway app, so i reinstalled and now I can't login. the websites SSL encryption seems to be gone and im worried that marshall won't notice for a good while, anyone know when this'll be fixed?
Hi all, I recently unearthed a 100w wedge monitor. It's huge, really heavy, and really old !
I've never encountered one before, so wondering if it's the real deal ? The serial number plate states, Made in England, with a number of 'A 01870'.
Much obliged !
Gary
How do you use the compression and distortion effect at the same time
I receive the following error when trying to set up my Acton II Voice with the Google Assistant built-in speakers using google home on my iOS device: "the operation couldn't be completed. (kgskerrordomain error - 83902.)
I have done all the basic trouble shooting such as performing a factory reset on the device, rebooting my phone + internet, changing the language on my device, but nothing seems to work.
Any suggestions on how to fix this issue during the set up?
Hello.
I had that issue for a sometime on my code50 but now I know a bit more about it. For at least two years this amp was changing preset settings why I was playing on it At first I did not reallise that especially on clear sound, but after some time with distorted sound it was obvious that sound become louder and more distorted. Visually I could see that display become dim and almost always was changing from number and name page of the preset to page with settings. Now I can see when phone is connected settings on the app are changing as well. It is gain, volume, bass, middle and treble parameters which move up. Master is staying like it is. After changing preset to other one and coming back to the same preset it will stay normal for some time (few second to few minutes) and change again.
I tried to update firmware but that did not help. For some time I was suspecting power supply issue as sometimes electricity in my place can be not up to standar , but now I am sure that is not a case. Any idea what cause that problem and how to fix it?
Wondering if anyone has had or heard of this issue?
Code50, less than a year old.
Me and a buddy are somewhat beginners, and playing Deftones and Chevelle type songs. I have a "Deftones style" distorted heavy tone preset loaded that I'm playing on.
So after an hour or so playing, the tone will start to sound "metallic" and kind've have a "ping" to it, if that makes sense. Sort of sounds like you have a speaker inside of a giant metal cup.
Sorry if this is a newbie question, just sort of confused.
The guitar was new in October, so I assume it's not the strings. I also tried swapping to my Jackson guitar, same annoying metallic pingy sound when strumming. Changed the cables too.
Any ideas?
Hello
when turning on my code 50 amp I wasn't able to get any public presets made by the community iv tried factory resetting the amp reinstalling the gate way app numerous times but when signing back in I get the same error message my amp has not been updated with the recent firmware but I'm unable to because I can't sign into my account on the gate way app any fixes
The error message says
"An SSL error has occurred and a secure connection to the server cannot be made"
I am struggling to connect my two acton 3 speakers to play as stereo, I bought them because I should be able to connect them together, but I am afraid I will need to return them. I tried everything from the Marshall bluetooth app, Is there any solutions?
Hi. I bought a Acton III and discovered that the right MEDIA CONTROL does not work: when I press on it nothing happens.. I have already updated the firmware and done a factory reset. But the problem still exists. Is there a way to fix this?
Bonjour
Quelqu'un aurait il la notice détaillée du DSL 5 CR s'il vous plaît?
Merci d'avance