The utility will download from the Marshall website, but when I try to run the setup program it will not install. Has anyone had this experience and if so, how did you resolve it ? I'm running Windows 10.

This is the message in the temp log. As I'm not an IT guy, I have no idea what it means

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [NTProductType] = 1 {int}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 10.0.0 {version}
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Launching Application.
URLDownloadToCacheFile failed with HRESULT '-2146697208'
Error: An error occurred trying to download 'https://my.marshall.com/downloadfiles/firmware/MarshallFirmwareUpdateUtility.application'.

Is there someone who knows to get a good Slayer sound as the album of Reign in Blood? What are the best settings and what amp?

Noise coming from presence control when turned, no crackle but something like a dirty pot? Its not the hiss you get when volume is turmed up.

Buenas noches, tengo un Code 25, a mi me gusta conectar mi celular para tocar encima de mi musica, pero el audio no se escucha bien, parece como si no tuviera fidelidad se escucha opaco, ya probe con otro celular, con una laptop, lo probe con cables y sigue igual, deseo saber si esto es normal o tal vez mi amplificador esta fallado ya que el mismo audio lo conecto en una bocina cualquiera y suena  mejor, gracias

User manual for the 2550 says to use 8 ohm output select into a 1960AV 4x12, but the 1960AV only has MONO 4 Ohm or 16 Ohm input.

Is it ok to use the 16 ohm input on the 1960AV, or should I switch the 2550 output to match either the 4 or 16 ohm input to the 1960AV?

My gut says set the 2550 to 16 Ohms output and connect to the 1960AV in the 16 Ohm MONO input jack.

Hello. I have a problem. I bought the Code 50 combo and found a sound defect. At a volume of more than 20%, a strong stroke begins with the speaker. What to do with it? Attach audio file to an example sound. https://drive.google.com/file/d/1_eYJm63ltzt94YlJipyZY0J5atg98U_o/view

I am not able to use the product in a minimally satisfactory way due to the following problems and difficulties:

- It is not possible to change the order of patches saved in either the hardware or the mobile application. There is no way to back up the saved patch set;

- The foot controller only controls the patches of blocks 1, 2 and 3. I explain: the FS only handles A1, A2, A3, up to J1, J2 and J3, which totals only 30 patches out of the 100 available. It is not possible to handle patches numbers 4 to 10, 14 to 20, 24 to 30, 34 to 40, etc.

- The unit is crashing during patch editing directly on the hardware (I have videos with the evidence).

Marshall Team, we need your support to resolve this, please! Thanks!

How are the four Celestion G12M-25 (25W, 16Ω) speakers wired ― series or parallel ― inside the 1960AX and 1960BX extension speaker cabinets?

Hi,

I want to sell my VBA400 Amp and Speaker cabinet. I don't really feel ebay would be the best place for this. Does anyone know of any online resale places that might put a great amp in the hands of an appreciative owner?

Pete

Could EL84 tubes be substituted in place of the EL34s if need be?  EL34s are becoming less available.

As per title, Code 50 speaker suddently stopped outputting any sort of sound. Swapped out guitar leads and done factory reset to no avail. I can use it through headphones. Help!

My Code50 amp smells like an electrical fire after it's played for about 20 minutes, any help?

What would be the correct way to connect the multi-effects (POD HD 500x) to the amplifier (CODE 50)? I would like to use the multi-effect amplifier emulator in some presets. please

I am looking for the correct Brian May tone presets for my CODE.

Hello, I recently acquired a vs100 head and it has a lot of weird noise going on. I'm guessing it's down to the preamptube and I'm going to replace it when I get cash for a tube and if that fails I know a good place to get it serviced. What I really need help with is finding a  4x12 cab that goes well with the head. I want to get a good heavy sound going, I'm going to be using it to play doom metal mainly so if anyone has any suggestions. I would prefere a marshall cab and I've been looking at the 1960A, 1960B and 1960BV but can't really decide from what I have been able to google. There are no stores near me where I can try any cabs out either so I'm a bit stranded right now.

/Joachim

How do I use the line in on an AS50D with an iPhone or iPad?

Do I have to purchace a a mono left and right male to stereo female adapter?

i dont know the code

Hi, 

I've just recently bought the Acton II to have as a speaker in our bathroom. Looks great and sound good enough. So far I'm satisfied. 
However, the speaker is driving me mad. Here's why. 
My girlfriend and I both use the speaker whenever we're spending time in the bathroom, so both our phones have been connected to the speaker at some point. 
But, if I'm playing music from my iPhone to the speaker and my girlfriend is in another room, let's say, watching YouTube on her iPhone things get wierd. If she adjusts the volume on here phone it also messes with my music in the bathroom. 

Another example:

Playing music from phone 1 to Acton II. then, Adjusting the volume by using the buttons on the side of iPhone 1 also adjusts the main volume of phone 2. Even though Phone 2 isn't in use. It just messes with the volume of it. 

This is suuuuuper annoying. Since the app is no where near of being good, I don't know how this can be solved. If there's no good solution I'm gonna have to sell the speaker and buy a brand that really knows how to make speakers for this purpose. 

Does anyone know if this can be fixed..??

thanks / Mathias 

How do I clear all presets from code 50  foot switch and go back to the fatory ones