I bought this amp in late 2016 and about 3 months ago the mic channel died.  No sound at all from it.  Any thoughts or suggestions on what to do>

Hi please refer to this previous question to help explain the background to my question:  https://my.marshall.com/forum/question/1479/marshall-code-100---should-it-have-come-with-a-2-way-foot-switch?filterType=recent&myActivity=True

Basically I bought a Marshall code 100 (no it's not 100H or 100C just a plain 100). It was out of its box and on display but discounted by about $180 because it had a slight dent in the base. The store rep claimed it had not been used. I bought it due to the price but after a few months I realised it should have come with a 2 button footswitch. I then raised this fact with the store and they agreed to supply me with the one that should have come with it. It has been about 6 months since they promised me they would replace and every time I ring up they come up with some bullshit excuse like "oh our suppliers on the other side of the country claim it is not sold as a spare and they have to order it in and they are not receiving any new stock of this item until Feb". 

So Feb has come and gone so I am about to ring them and vent my frustrations on them. Then I thought maybe I could get the PEDL 91009 foot switch instead of the PEDL-91010, at a discounted price (perhaps to the value of the cheaper switch that should have come with it), as I am told it is much better.  As I have never had or even used a foot switch and am completely clueless on them I have a few questions:

Does the basic PEDL-91010 footswitch only allow you to switch to the next preset up or down on the preset list of 100 presets? Or can you jump from like preset number 4 to preset number 98? If it only allows you to switch to the next one up or down does the 91009 model allow you to switch between any two presets on my list? Does the 91009 model allow you to program more than 2 presets to switch between when playing a song? 

Finally, one responder to my other post mentioned that the Code 100 only comes with a basic 2 way footswitch and that the PEDL 91010 is an optional extra. But this contradicts what others were saying (eg that it is the PEDL 91010 footswitch that it comes with).

Anyway I am confused and need all this cleared up so I am fully armed when I next call the store.

Hey, one of my all time favorite riffs is Unchained from Van Halen. I'm trying to get that particular flanger sound on my code 50 but I just can't get it right. I found a few Van Halen presets but those are for other songs. The flanger in the Van Holy preset is too much over the top to my liking. A preset for this song would really be appreciated :-) 

If this topic has been covered before then please excuse my new member error.  Anyways, I’m hoping to find an answer for a particular problem I’m having. I’ve owned my amp for a little under a year and I’ve noticed that since I’ve had it paired with the cabinet I have now it has little to no natural overdrive/distortion, that classic crunch we all know. I know the amp is rated at 50 W  however the cabinet I have a paired with is rated for 140 W. I am new to using these types of amps and cabinets so if my cabinet is stronger than I am please tell me. I do not want to have to send it back for maintence if it’s not needed. I also have been hearing more humming than normal and occasional buzzing emitting from the cabinet. 

When I update my firmware on my Code 100H  I get the 1.41 update but it continues to update backwards to 1.11 and I cannot stop the update at the new 1.41 update..When I turn the amp back on it shows 1.11 not 1.41.  ???

How do I get the new update alone?

So about a year ago I got a footswitch for my Code 50, and when i first got it, it started banking backwards on it's own. I was able to stop it...until now. The worst part of it, is when i go to use the amp's tuner, it immediately exits because it thinks the button is being pressed. When it began a few days ago, I was able to press the bank button to increase the bank and counteract the issue, but now the bank button stopped working. Maybe I pressed it too hard or too much or something. I cant remember how I fixed it last time or whether or not the bank button worked, but all I know is this time it might be done for good. If anyone knows of this issue or has had it happen to themselves, please let me know how I can fix it. I dont remember all the presets that were saved to it, but I can remember a couple. Please help!!!

I had assumed that this was the maximum sample rate, not the only one. In practice it seems that it is 48kHz-only. Am I correct? 

Hello, I don't know if this is the place to ask but I'll try anyway.
For my Code50 I really would like to see Presets from guitarists like:

Johnny Marr (The Smiths)
Wayne Hussey (The Sisters Of Mercy / The Mission)
John McGeogh (Siouxsie and the Banshees / PIL)
Chris de Garmo (Queensrÿche)
Geordie (Killing Joke)
Robert Smith (The Cure)
East Bay Ray (Dead Kennedys)

I recently bought a new DSL40CR. Great sounding amp! Great tones! I am noticing that the low end sounds a bit flubby. I was reading in some forums that this can be caused by improperly adjusted BIAS. Can anyone direct me as to what the mV for each left and right tubes should be set to?

I have recently bought a marshal code 100 amp.  Not the amp head, The actual amp.

my question is:

If we’re to buy another code 100 amp, can I run one to the other and use one channel selector for both?

Hi all,

Just purchased a CODE 50 and am very pleased with the purchase, great modeling amp. However, I downloaded the Gateway app and any changes I am making on the my.marshall.com website do not seem to be syncing with the app. I added new presets from the user presets section but the change does not show up on my app (old preset I had is still there and not replaced). Also, now I have duplicates of several presets! No idea why. Every preset from 51 on is duplicated so now my list of presets is up to 148. What gives?? How do I correct these issues or are these known issues? 

I am using an iphone8 with iOS 12.1.4

Any help would be much appreciated and let me know if I am doing anything wrong. Thanks.

Jared

Hi everybody,

I have bought a code 50 but gateway is not working because bluetooth catch only my phone with things like youtube. Is there a solution?

Thanks for the answer.

Hope this helps some folks. The registration and Web site is a joke. Shame on you Marhsall !

https://marshall.com/marshall-amps/products/archive

Hello - I have the Marshall DSL1CR and and would like to use the emulated out with headphones.  However, when I plug in my headphones, sound still comes out of of the speaker.  Am I supposed to disconnect the speaker jack (I wanted to confirm this before trying as I didn't want to damage the amplifier).  Any help with instructions on how to use this amp with headphones for silent practice would be very helpful.  Thanks!

Hello there:

Can someone tell me how or where I can register this Marshall Amp I just purchased?

Thanks

Randy Scott

what size are the rubber feet on the CODE 100 wat combo?  One of mine came off and i need to replace 

hello when i change patches on my code 50 , despite using the same pre amp and power amp im getting a delay on the patch change, approx 2 seconds untill the selected patch actually kicks in. is this down to the DSP chip recalling the set ups? also has anyone tried playing this code with cab sim off.  sounds quite good like my old TSL combo.  not bad at all .

Can the Code 100 Combo be connected to your Code 4 x 12 Cabinet that is used with the Code 100H please?

I've pulled out the bright cap on my 1987X.

The original cap had too much brightness and added way to much hiss.

However I find it's darker than I would have liked it to be.

What cap value & voltage cap would be atleast 25% less bright that the original

Karan.