My wife purchased a DSL 15C for my birthday.  I took it to a jam and it went silent for about 10 minutes.  Tried different cables and guitars and nothing worked.  It came back on and worked the rest of the night.  I played about two hours the next day and it went silent for about 5 minutes.  It cut out again the following day for about 3 minutes.  I told Amazon and they sent a replacement amp.  I plugged in the replacement amp, out of the box, and there was a loud noise.  All of the controls were at zero.  It never came on does not work at all.  Both of these amps are less than one week old and had consecutive serial numbers.  I purchased them on Amazon and therefore do not have a dealer.  

Kent Franks  

Hey all, 

Who has been working on the schematic for the new DSL 1w (2018)?

I've got mine open and have started thinking about some tone mods but would love any help with the schematic, part schematic or even a mod list.

I'd be totally happy to hack mine up first if anyone has a mod idea too.

I can read a schematic but I'd completly f%^$ it up if I tried to wrtie it out just via the PCB so if you'd like to help let me know and I'll send the high res pics ( assuming you dont have a 1w yourself).

Also I'd be all ears for some tube advice. I've put a 5751 inplace of one of the 12AX7 and its a bit better to my ears. I'm going to say V2 is the dirt channels V yeah?

So far I love it and i'll be interested to see what Blackstar do next with their future 1w.

S.

after discovering most famous rock legends used 8 gauge or below  i wanted to try them out but dont know if they will brake more easily

after discovering most famous rock legends used 8 gauge or below  i wanted to try them out but dont know if they will brake more easily

My crybaby wah mini simply mutes the amp when used. My chain is guitar:boss tu3 tuner:crybaby wah-amp. I’m not sure what I’m doing wrong. Can anyone give me advice or help? 

Thanks!

(disregard.)

Hi. I own a JCM900-4100 (100W head) and two different cabinets: one 1960AV and one Laney 2 x 12" Ironheart.

I normally use just 1960AV with 16 ohm commections (I prefere than run 1960AV in stereo with two 8 ohm connection), but it happends to use both cabinets, usin the 2 x 12" on the other side of the stage as "monitor" for the bass guitar player... can I set JMP900 as "4 or 16 ohm" and use both "speaker out" one to 1960AV (16 ohm input) and one to Ironheart (8 ohm input)?

I use to store my 1960AV in the practice room, so, if I need to play at home, or in small gigs, I use Ironheart 2 x 12" only: how should I set the amp to connect a single 8 ohm speaker?

Thanks, Luca 

     Where can I get manuals for AVT150H Valvestate 2000 ?

I just purchased a new DSL100H and provided a footswitch that doesn't work. It tries to switch channels but as soon as I lift my foot the channel reverts back.  The model number of the switch is PEDL-90010.  I read in the manual that the switch I should've received is a PEDL-90009.  They both look similar but does anyone know if that makes a difference? Thanks.

I am looking for the user manual for the MG100HCFX.  The website is lacking and does not provide much support for anything but the CODE amp.

Does Marshall still make the MG100HCFX ?

como puedo acceder al gateway del ampli (code 25) para re acomodar los preset a mi gusto

ya que la paguina solo puedo ver el gateway de la nube

Hello.

I have the TC  G-System and will try a wet/dry setup with my JVM410C and JVM410 HJS amps.

I thinking to connect it like this: Guitar in to input G System / From G System insert loop send,and to dry amp front input / From dry amp loop send,to G System insert loop return / From G System left output,to wet amp loop return.

Hope someone can tell if this is right,or if i can try it,with out no damage for the amps.

Thanksful for answer.

how do i find the registration card online ?

Hi

Ive heard to get best sound out of my amp to get it off the floor. Would a stand really improve the sound, which i love anyway!

When you activate bluetooth on the amp the code number that is displayed, must it be entered somewhere. I have your app loaded down on a smartab. I press           "scan for amps"  and nothing...all the time no connection...would appreciate some feedback...thanks

can i make a fourcable connection with my boss GT6 if so how do i do that?

I just recently purchased a Marshall Code 25 and when i tried to use headphones(all 3 of them, of extremely good quality and every day use) the sound is terrible.

What might be the problem, and are any of the marshall headphones good for that amp? Does the Code need some kind of specific headphones?

con i use the boss fc200 as a footswitch with the code50 amp. Im having a midi connector set to the plug where it is to be connected.

if so what standard midi presets do i need in order to be able to switch form setting 02 to e.g. 53

Looking for a cover (item# COVR00133) for my Marshall Code 100 combo amp. No one stocks them state side.

Firmware is up to date, turned amp on and the the lcd just blinks. Tried doing a reset ( power off, hold amp button down etc) but no change. Any ideas ?