Hi there, what is the correct cabinet for the jtm45 head? thanks 

hey,

like everyone else my iphone 6 will not connect via the Gateway app. i downloaded the new firmware and re-installed the app but nothing......Marshall, please help! if anyone has a solution i'd love to know what it is?

lilweed

I just bought this amp yesterday after flirting with a Blackstar HT20 and realising I wanted a Marshall again. Well, starting to wish I hadn't bothered.

Like so many others, I can get my phone (Samsung Galaxy S5) to connect to the bluetooth and actually play music through the amp. BUt Gateway will not find the amp within the menu. I've tried all the uninstalling Gateway, reinstalling, updating the amp's firmware - even tried using my daughter's Samsung S4-mini which again, connected to the audio but will NOT FIND THE AMP!

I have a Samsung Galaxy Tab 4 which is a good wee tablet but apparently isn't compatible with Gateway.

Seriously. So I have 3 different devices and not one of them can connect to my new amp.  Clearly this is a fault with the amp itself since the same thing happens with two different phones.

Please don't tell me to go through that long list of uninstalling, reinstalling, removing the bluetooth device and reconnecting etc etc. I've been doing all that since I got the damn amp yesterday afternoon. 24 hours later and none of it has worked.

Is it at all possible this is going to be addressed SOON in either a Firmware or Gateway update? Clearly, if the amp is faulty I will need to return it soon to get my money back but, honestly, I'm loving the sounds I'm geting with the presets, I just want to edit them rather than all the hassle of returning the amp to the shop!

I saw a review on the Google Play Store for the Gateway app from a guy in June 2016 - that's 7 months ago - and he was having the exact same issue. So if it's not been addressed in all that time and Marshall are still sending out these faulty amps, what hope for a fix? Please tell me there is one!

I bought a Code 50, brand new out the box. Runs perfect! No firmware upates have been applied. It plays great, sounds great, and does everything as advertised. Am i the only one that got a Code 50 thats not having issues. I also have a Boss Katana 100 2x12, and I think the Code 50 sounds way way better to my ears.

After the firm update it is impossible to connect between Gateway and the Code 50.

It is very annoying! I played a jcm 2000 tsl head and a jcm 800 head and i bought de Code 50 precisely for the possibility of a bluetooth connection!!

I saw a lot of the same questions, but never a answer back from Marshall..... that's make me sad.....

Hope for a answer...

Hi

I have just bought one of these cabs - Is it possible to fit casters and if so which ones and whats the best method?

Hello !

Like many of lucky owners of Marshall Code 50, I also have problem to pair Gateway app with Code. My phone (Ulefone Power with Android Mashmallow 6) recognize amp thru bluetooth and even play MP3 music, but can't work with Gateway. I wonder why ? I tried to rebooth code and phone several times, also install and uninstall app few times, but nothing helps. I upgraded firmware on my Code 50, still nothing. Can i expect fixed new version of gateway soon, and will it be tested on more smartphone brands ? 

greetings from Zagreb/Croatia

Tvrtko Grgic

tgrgic@hotmail.com

I have a Bluesbreaker reissue which I absloutley love.

Of course it doesnt have a master volume.

Has anyone any experience, good or bad of putting an attenuator before the speakers?

I want to keep the tone but redue the volume!

Steve

Where do I register my guarantee on the web page please?

Hi, I have the Marshall Code 50. I found some pretty good sounds for a few rock songs. Is there a way to share my personal presets with the Marshall Code community?

Best regards

Hello, i've noticed that the the when the power amp is on (doens't matter which one) that it seems to make a crackling noise.  It is hard to hear when playing, but when you let a chord or note ring out it is noticeable.  I have determined that it is the power amp function as when I disable it the noise goes away.  Is this normal as it is modeling power valves or is there something faulty?  

Thank you.

Can someone please help me to find some AM presets or could someone please tell me how I could produce my own with the effects on the code amps?

hi guys im wanting a new amp to go with my new les paul however i dont know which one to choose i dont want to go too expensive its just to practise with my band in the garage. i want an amp that has a heavy and deep sound to it if you have any suggestions plz comment. also go and subscribe to my youtube channel at www.youtube.com/Reevesy vlogs

The power light started to go off and on on my  mini jubilee head today no pattern to it seems random . Has anyone else encountered this

Amp on clean channel super loud, when on distorted channel need to crank to half or more to equal clean on 1/4 setting, low gain 2 or 3, tubes or owner issue? Is this normal, kick in overdrive distortion goes through roof, in a good way. Loudness not like clean channel. Thoughts or suggestions, thanks in advance.

why can't I get the patches from the website downloaded in my iPad and into gateway without a cable? (And pc? ) 

What a bloody palarva 

any plans to add a the equivalent of that presets webpage into gateway direct 

hint: you should otherwise thus isn t the easy accessible product I think you wanted to have

Hi, Although My laptop recognizes My code 50 via usb, nuendo 4.3 doesn't (although it recognizes My zoom and korg asio).

Therefore, I'm unable to assign the code has an input for recording via usb. Thanks.

I have recently been given the above amp and before I connect it to a speaker and switch it on I am concerned to know the correct protocol for connecting a speaker cabinet(s).  The speaker output sockets have no information directly next to them but a label elsewhere on the rear of the amp states "WARNING. Not to be used with speaker cabinets of less than 4 ohms"

My queries are:-

1. Is it safe (i.e. without risk of damage to the amp) to use just one speaker output as long as it is connected to a speaker cabinet of 4 ohms minimum impedance and appropriate wattage?

2. When using both speaker outputs can they both be connected to cabinets each of 4 ohms minimum impedance or are the outputs paralleled in which case would I need to work with two cabinets each of 8 ohms to arrive at a 4 ohms minimum impedance in total?

Apologies if the answer to this seems obvious but I have a little knowledge of these matters and while a little knowledge can be 'a dangerous thing' it can also lead you to be concerned (possibly unnecessarily) about getting things right!

Thanks in anticipation

I can only see questions here, how do i see the answers? My issue has been asked and I can see it says there is one answer. How can I see it? Frustrating.

EDIT: Click on the title of the question to see the thread. Thanks to Fretbuzz.

So I just got my CODE50 two days ago and yesterday was the first day I had to play around on it, and that being at a live rehearsal of all places.  I didn't get to do much tweaking, but I noticed a problem with the EQ. If you have all buttons deactivated then the Bass Mid and Treble knobs do absolutely nothing, NOTHING...  I tried using the Natural preamp thinking that maybe the EQ knobs are strictly digital and an amp or preamp needed to be activated to enable the EQ to function.  When the Natural preamp was selected, however, the overall volume (master knob all the way up and the volume knob at 12 o'clock) was so low hardly anything could be heard.  Am I missing a menu option to set the volume or something?

Also, I've saw a lot of people having trouble getting the Marshall Gateway app to connect to their CODE amps, myself being one of these people unfortunately, but I haven't saw anyone come up with a definitive solution other than 1. Updating the Firmware 2. Turn the amp and phone off then restart both of them and try again. 3. Delete the amps Bluetooth profile from your phone and repeat step 2. 4. Call Marshall support.  I can get my Samsung Note 5 itself to connect to the amp (getting a weird message on my phone that says verify such and such number is the correct PIN for the Marshall amp but not having any further prompts on my phone or on the amp after tapping OK, but still connecting regardsless), but when I bring up the Marshall Gateway app and go into the menu to connect to the amp I can hit the scan button all day and it will NEVER find my CODE50.  What the huh?!!!  With all the other people I've saw on this forum having the same problem with the Bluetooth connectivity, you would think there would be a end-all-fix-all solution to such a massive problem. Has anyone heard anything or should I send this amp back for a refund while I still can?