Hi there
I'm planning to add an extension cabinet, most likely the JVMC212 2x12 to my JVM210C combo.
Currently the speakers of the combo are plugged in the 1x16 Ohm jack and the ipedance of the JVMC212 2x12 cabinet is 16 Ohm. How should I connect the cabinet to the combo? I can see a 2x16 ohm jack, should I use this one for the combo speakers along with the 1x8 Ohm for the extension cabinet?
Please advise
Thanks
Regards
David
Hello users of Marshall ,
I bought my Moitor Bluetooth early 2020, I used it perfectly with no issues until last month (June 2023).
My headphone turns on and connect to my Iphone, however whenever a take it off or move a little bit the bluetooth connection cuts and my Marsahll disconnects automatically. For information, my Marsahll felt down some weeks ago.
Have you met with this issue ? How can I resolve this issue ?
Thank in advance for your help !
ayuda con preset para el solo de audioslave like stone
Hello!
I have a Marshall CODE50 combo, and when i connect it to my iPad via cable, the input and the output works well in applications developed by Apple (like Garage Band), but I can't control of my amplifier settings in Marshall Gateway app. Is there any way to control the combo on the iPad through the cable?
Thank you in advance for your reply.
I've just bought a Marshall CODE 50 and after playing a bit with it and experimenting around with the settings, I came to a conclusion that the cabinet models sound better recorded with the direct input than through the amp speaker when playing.
Just wondering if anyone thinks the same. Sorry if I couldn't make it more clear, English isn't my native language and I don't know how to fully express myself.
I have an inbound JTM studio and I wanted to get a few extra pairs of 5881 tubes to have on hand. What tube types are acceptable for this amp besides the 5881's? For example can I use KT66's?
thanks,
howie
i have a question is this a legit one that I bought.??
I have an incomprehensible problem with the code, I try to connect to the combo via bluetooth connection, but the device is not displayed in the list of bluetooth devices, even after pressing REV + POWER the device is nowhere to be found (I checked on different smartphones) and throughout the whole time the code emits strange sounds of knocks from the speakers that are not solved in any way, I updated the firmware several times, this did not help in the end. Has anyone had the same problem, how did you solve it?
Hi everyone!
I have a CODE 25 and recently spent quite a bit of time trying to find a setting that would be good for "tapping" style playing, but I can't find the right one. If anyone could help, I would greatly appreciate it!
Hello-
I used to have no problem connecting my Code 50 with my Mac via USB. All of a sudden neither my computer or DAW will recognize it. I switched out the usb cable, did a factory reset of my amp, tried to update the software, but I can't get the mac to recognize the amp for the life of me. Is there a more extensive reboot I don't know about? Very curious as it used to work just fine and I can't think of anything I did to jeopardize it. Thank you.
Why i couldn't can connect my Headphones with my Phone on Bluetooth??
I have the Major IV Headphone andta Phone from Xiaomi M4Pro
I want to roll back this new firmware. The first 10 presets are changed and I need back the Plexi and metal stuff. Why did you remove them? Is there any way to offer different firmware?
A hardware issue prevents connecting my CODE25 practice amp with Gateway via Bluetooth on my PC (Nox / Windows 10). Gateway freezes at 'Turning on Bluetooth' message (the Bluetooth hardware in my PC is faulty). Can Gateway be set to connect via USB instead as a device-level default? My CODE25 amp does connect to Gateway via Bluetooth on my Android smartphone; but the phone's screen is too small to use comfortably, so USB connection to PC is needed for its much larger (I have 26" to 46" PC displays available) displays. Being severely nearsighted and over 50 years old, my options are limited.
Installed the new firmware and now my Code 50 cuts out frequently and has to be restarted. It also seems to have effected the sound quality.
This needs to be fixed or post the old firmware version.
Hi, I had a marshall code, dsl 1w, 15w and 40w. I liked of 1w, much loud! I sold all and I have been used a app amplitube with iphone and ipad + irig nano amp, but I figure out in the worst way about update versions, It just stops working after the update. A nice day, and you cant play anymore on analogic gear.
Now Id like a all in gear and the better for me now its the Code 25. Even without the app I can handle the amp manually. Although, be convenient.
Whats the current version suportted for code today? My IPAD 9th is 16.5, IPHONE 7 is 13. Is it works?
thanks.
hy, i'm a proud owner of a jtm 1962 M-2006-19-0714-A
year of production?
Watt RMS?
Thanks a lot.
Hello all
I have a Fender Squier electric bass. I have been using it with a Rumble 15 amp.
Now I have bought a Marshall Code 25 for my Epiphone guitar and I would like to know if this amp can be used also wit an electric bass.
Thanks a lot for your support.
Antonio.
Can you please tell me which amps the PEDL-91003 is compatible with. I have heard it can be used with the DSL100H Is this the case?
The Gateway app on my Android phone has been repeatedly losing connetion to my CODE head in recent months, and attempts to manually reconnect have usually failed. This unreliability is completely unworkable for gigging, so today I have tried to solve the problem through a thorough update and reset ... but now I can't get the connection to work at all. I deleted the Gateway app from my phone, unpaired the phone from the head (by "forgetting" the Bluetooth pairing), and have installed all pending firmware updates. When doing those installations, I noticed that several related to improving Bluetooth operation, so I was hopeful this would solve my problems. So I've gone ahead and carried out the "First connection" instructions on the website, but these instructions have failed at a very early stage. After I press Rev and Power and get the blue flashing light, when I attempt to "Pair new device" from my phone, I get the message "No nearby Bluetooth devices were found". This connectivity problem is definitely at the Marshall end, because I have checked that my phone is able to connect with other Bluetooth devices and it is doing so fine, so the fault is not with the Bluetooth operation of my phone. It seems like there have been some known Bluetooth connectivity problems that you've tried to fix during recent firmware updates, so is this something you can advise me about and give me a fix for? I hope so - there's not much point in you having a really good product if it's unusable in practice.
Here's an interesting thing. User Tomáš Nekovář, stole my Octafuzz preset and put it up as his own. Even complete with my Youtube link and soundcloud demo.
Seen it all now,
Oh well it was put up to share anyway, so enjoy MY patch everyone.